Quick way to Boost Chinese Rubber

says Hi In first i want to thank you for your interest...
says Hi In first i want to thank you for your interest...
Well-Known Member
Feb 2015
1,431
916
5,318
Read 6 reviews
Hi ...
I was in hurry so i decided to do a quick boost of DHS Tg2 Neo Blue sponge .
First i apply first layer of booster (baby oil ,cause Falco long was not available in the moment) directly to rubber (it is containing layer of glue by default) ... after 4 hours of dry i apply second layer of booster , then after 12 hours i add one glue layer of Stiga attach power glue.
Then one more layer of booster . wait for cca 20 Hours ... but not until its fully dry just when it starts to be dry ... Then i remove all of the Glue with booster residue and give it a one clean Glue layer... and attach it directly to the blade ....
Perfect join is made and the feeling is better ... it is not so mushy (this i think is because of the glue layer) it is crisp but still has great speed and spin .
It was a blind shot but i like the feel more then When i`m boosting it the classic way .
And what is the best ..... is the weight ... now i`m only cca 1.8 gram heavier then original weight ....
Normally each layer cost you 1 gram ... so 5 Layers are 5 grams of weight ...
I hope someone will try it and confirm .
Here some photos.
Screenshot_2017-05-25-06-44-52.jpg
Original.
20170524_171943.jpg
Boosted
20170524_170555.jpg
Removing the glue.
20170524_172512.jpg
Final.
 
Last edited:
  • Like
Reactions: Lolman
Top