Quote:
Originally Posted by t.t.s.t.a.r
Sure, you have my website in my signature with a lot of info, as well as some of the ready made blades for sale.
Printable View
Quote:
Originally Posted by t.t.s.t.a.r
Sure, you have my website in my signature with a lot of info, as well as some of the ready made blades for sale.
No please don't stop, It gives a ball park value, that's worth a lot.Quote:
Originally Posted by hipnotic
If You do then You should specify a DEF to OFF+ rating.
(Right now I don't recall if You do on Your home page.)
Cheers
L-zr
Hi Sergio/Hipnotic,
Frequency pls as those numbers makes more sense vs the speed ratings.
For those who went into custom blades or wanted a custom blades, they would get a better understanding from frequencies because that explain the stiffness of the blade via the wood composition and types of fibers used.
Keep up the good work!
Wow! Pretty good. Nice one.
I’m the lucky owner of the blade in question. It’s my second time ordering from Sérgio and I’m seeing a risk of this becoming a habit :)Quote:
Originally Posted by hipnotic
A brief review of the blade and the process before ordering follows:
After playing with ALC-blades for some time (roughly 18 months) I decided to go all-wood as template recommendations suggest. The Tibhar Stratus Powerwood was the blade of choice and altough it woorked for the most part I couldn’t really cope with FH loops vs. backspin (usually my strongest shot). Also the head-heaviness of the TSPW was really pronounced which I didn’t enjoy. Hence I contacted Sérgio.
We had a discussion around composition but to be honest I knew I wanted and trusted the suggestions from Sérgio. What I askes for was a larger handle (but not as monstrously large a my previous order), lower balance and a bit more speed and flex than the TSPW.
The blade arrived and I glued it with D09C FH and Rakza Z BH. It plays just as I wished for it to do. For me I think it is a reasonable compromise between what lets me win some matches and enjoy my game and what benefits my development. I have a bit more speed and lower balance than with the TSPW. My FH opening loops works again and I’m very happy about the handle. The one thing I would change (well it happen sooner or later) is asking for slightly wider wings and bottom part of the blade face. That, however is me developing as a buyer of custom blades.
As has been mentioned about Sérgios work it really is quite amazing.
Thank you Anton 🙂
Yup Anton Sérgio's work really sucks. I mean just terrible. That is why my friend ordered from him and the also made one of the most outstanding blades EVER.
Keep sucking Sérgio, the world is depending on you.
Sent from my SM-N970U using Tapatalk
Custom order. Mizutani ZLC inspired composition with a simple and classic handle look.
Composition: Limba / ZLC / Ayous / Kiri / Ayous / ZLC / Limba
Weight: 88.3g
Thickness: 5.70mm
Freq,: 1442Hz
Balance: 2.3cm (Low)
https://www.tabletennisdaily.com/for...6/04/173_1.jpg
https://www.tabletennisdaily.com/for...6/04/173_2.jpg
https://www.tabletennisdaily.com/for...6/04/173_3.jpg
Beautiful!Quote:
Originally Posted by hipnotic
It looks pretty good. Nice one. Keep sharing.
Frequency is back.Quote:
Originally Posted by hipnotic
Fantastic many thanks.
Cheers
L-zr
Quote:
Originally Posted by Lazer
Back by popular demand 😁
The difference a top ply makes. Blue fig is soft, almost as soft as Ayous, so even at 6.15mm this blade is not stiff at all. The feeling is relatively soft, but speed wise it is faster than the frequency reading suggests, probably in the Off- range.
Available FS.
Composition: Blue Fig / Ayous / ALC / Ayous / ALC / Ayous / Blue Fig
Weight: 88.3g
Thickness: 6.15mm
Freq.: 1160Hz
Balance: 3.0cm (Med)
https://www.tabletennisdaily.com/for...6/07/219_1.jpg
https://www.tabletennisdaily.com/for...6/07/219_2.jpg
https://www.tabletennisdaily.com/for...6/07/219_3.jpg
This handle reminds me of Ross Leidy style. Very nice!
Quote:
Originally Posted by shinshiro
I also thought the same when I finished it, but I can guarantee this one was totally improvised.
Damn Padauk, why you so pretty?
Composition: Limba / Ayous / SZLC / Kiri / SZLC / Ayous / Limba
Weight: 88.6g
Thickness: 5.80mm
Freq.: 1400Hz
Balance: 2.4cm (Low)
https://www.tabletennisdaily.com/for...6/10/209_1.jpg
https://www.tabletennisdaily.com/for...6/10/209_2.jpg
https://www.tabletennisdaily.com/for...6/10/209_3.jpg
I see some interest in combi blades so here's one I recently made. This one is inner Limba/ALC on one side and outer ZLC/Koto on the other, with an Ayous core. The difference in composition is not big enough to create a massive speed distinction between sides. However, there is definitely a difference in feel, with the Koto side being more direct. Speed wise it is probably in the Off-/Off range.
Available FS.
Composition: Limba / Ayous / ALC / Ayous / Ayous / ZLC / Koto
Weight: 89.6g
Thickness: 5.75mm
Freq.: 1320 Hz
Balance: 3.3cm (Med)
https://www.tabletennisdaily.com/for...6/14/226_0.jpg
https://www.tabletennisdaily.com/for...6/14/226_2.jpg
https://www.tabletennisdaily.com/for...6/14/226_3.jpg
https://www.tabletennisdaily.com/for...6/14/226_4.jpg
This reminds me of something 🤔
Composition: Framiré / Aramid / Framiré / Kiri / Framiré / Aramid / Framiré
Weight: 82.5g
Thickness: 5.65mm
Freq.: 1356Hz
Balance: 2.4cm (Low)
https://www.tabletennisdaily.com/for...6/17/215_1.jpg
https://www.tabletennisdaily.com/for...6/17/215_2.jpg
https://www.tabletennisdaily.com/for...6/17/215_3.jpg
Quote:
Originally Posted by hipnotic
Except that the 'something' doesn't look half as good as this!
Quote:
Originally Posted by Manto76
Oh, that's a nice compliment, thank you 🙂