Search results

ref: https://pongbotsports.com/share-your-pongbot-experience/ Share Your PONGBOT Experience Product Category: Table Tennis Robots 🏓 Product Model: NOVA S PRO 🇨🇳 What is your skill level? Intermediate 👻 Rating: 😐😐😐😐🫥 4/5 How frequently do you use your PONGBOT robot? 4-7 times monthly 🤥...

It'd help if you stated a clear example e.g. "in my custom drill all 5 balls have the same Freq setting of 50%, which equals a prepause of 1.00 seconds, but the pause between ball#5 and ball#1 is more than that, i measured something around 2.0s, how come?". Then i would comment "thx for being...

we doht know what you're trying to do. Didn't this read help? -> post#13 anyway, the pause between ball5 -> ball1 is determined by the ball1 "Freq." setting

My mercury2 continues to be super tacky after 12 months of heavy use. After a full session i give it a good clean with a wet sponge and rubbing alcohol, and protect the rubber with a nonsticky foil

i simply went after the most popular (because the least expensive) item which was 120 balls Joola Training 40+ for 25€. that's less than 25cents per ball. they work great in robots. which robot have you got?

just by from amazon and be done with it

When you practice cerve🤪 receive for 60min, i.e. at Spin >=7.0, you should be experiencing the clogging of the black wheels, which causes a reduction of the resulting spin of the ball. That was my observation. (And i doht have that problem anymore, it's completely gone!) Would be great if you...

You're too kind thanks! Anyway, please check above, i've edited the post, including the link to my settings (from the far position, called "pos2", i.e. put in quotation marks™️) for the short Underspin Cerve from the demo vid and for the Tomahawks from "pos2". I learned that it's not possible to...

1316 Good asking 🤭, i just checked, the quoted ball settings doesn't work … from pos8. I still use the modded wheels whose white rubber band has been wearing down (btw very slowly), which is a good thing because a smaller wheel diameter exerts less mechanical pressure on the plasticky Pongbot...

Sorry for tr*lling my own thread lol, anyway this is Nova S Pro short serve (service) with max underspin, best i could achieve (note that the ball flies very low over the net): ball settings are: ball height -40.0, drop point 0.0, speed 2.5, spin 7.0 (=max for speed 2.5).

Bien venu but i can beat you! 🏓 😋

This currently available foldable stool from your local brick'n mortar Action Shop (Action Laden) could fit our bill, i'll try to find it in store today or so: https://www.action.com/de-de/p/2547087/barhocker/ 🤑 EDIT: i've just bought it and it is perfect for our purpose. The Nova's 4 feet...

dito and welcome @LeGrand to the forum! I just came from a robi2pon session (2h36min 86:2.4K, 4 drills), and sweating in the cold basement, as every owner knows, there is no time/possibility to find out new drills by experimenting with ball settings, because that would have ruined my training...

"It sounds like the elbow issue is really affecting your game, and that pain when you bump it is a serious concern. It could be related to the strain caused by the racket's weight, especially with the high racket speed you generate on those forehand swings. While lighter rackets can help reduce...

i comment the efforts no offense well done

Thanks for your feedback, however I have difficulty in fully understanding your problem or the solution to it. These days I have nothing to contribute on the subject of Calibration or ex-fac "out", other than the following: 1) Check that all parts/components are aligned and that the Nova...

i wouldn't believe everything you see on youtube

This thread is very racist

Great post @RWG18 , massive thanks for it, keep it up! That's how envisioned this thread to evolve: other owners chiming in, and sharing their reports. (…) and yesyes, i had to edit/finetune some ball settings too, and, now with the rubber band mod, i'll have to finetune them again. Everyone...

Prolly the most important post in the entire thread. Instead of updating the previous post, let's post anew: This is it! (Confirmed.) The wheels have a width of 14.0mm. To account for the width reduction upon stretching and the intentional overlap, we need to cut down the rubber hose at ≥24mm...