SDC Handmade Blades

This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947
Nothing too fancy, just a classic 5 ply looping blade with a Zebrano handle.

- Limba / Mahogany / Ayous / Mahogany / Limba
- 88.0g
- 5.5mm
- 157x150mm
- FL (101x25mm)
- 1141Hz
- 3.1cm (Med)

451%201%20jpg.jpeg


451%203%20jpg.jpeg


451%204%20jpg.jpeg
 
Last edited:
This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947
A beauty. Why is it built that way?

Mostly because the owner wanted it this way, the composition and handle design originated from his concept. The goal was to have a not too fast combi blade meant for SP on the Fh, with a more direct trajectory, and a safer arc on the Bh.

 
This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947
I haven't been posting a lot of penhold blades, that's my fault, I will try to do it more often. This one is a very light specimen, very stiff but relatively soft due to the AxC fiber. The low weight brings the speed down a bit, but it's still a very fast blade in the bottom of the OFF+ range.

Available FS.

- Kiso Hinoki / AxC / Kiri / AxC / Kiso Hinoki
- 74.6g
- 7.4mm
- 160x150mm
- CS (82x25x33mm)
- 1745Hz
- balance: 3.3cm

479%201%20jpg.jpeg


479%202%20jpg.jpeg


479%203%20jpg.jpeg
 
  • Like
Reactions: Haraold and Metaxa
This user has no status.
This user has no status.
Active Member
Oct 2018
993
1,030
2,310
I haven't been posting a lot of penhold blades, that's my fault, I will try to do it more often. This one is a very light specimen, very stiff but relatively soft due to the AxC fiber. The low weight brings the speed down a bit, but it's still a very fast blade in the bottom of the OFF+ range.

Available FS.

- Kiso Hinoki / AxC / Kiri / AxC / Kiso Hinoki
- 74.6g
- 7.4mm
- 160x150mm
- CS (82x25x33mm)
- 1745Hz
- balance: 3.3cm

479%201%20jpg.jpeg


479%202%20jpg.jpeg


479%203%20jpg.jpeg

Wow, this is super light for this thickness and everything. Even with a balsa core this would be pretty light. It's basucally a penhold Schlager ALC super light edition.

 
says 2023 Certified Organ Donor
says 2023 Certified Organ Donor
Well-Known Member
Sep 2011
12,822
13,211
30,390
Read 27 reviews
Sergey Tsos Scoobie Doo is NOT afraid of SDC blades, he liked the original Spartan, then when he hit with the newer Mandalorian, he knew immediately it was a winner capable of touch and power play. I had to use a hydraulic press to get the Mandalorian outta hiz pawz.
 
  • Like
Reactions: hipnotic
says Spin and more spin.
says Spin and more spin.
Well-Known Member
Super Moderator
Dec 2010
16,146
17,685
54,747
Read 11 reviews
Sergey Tsos Scoobie Doo is NOT afraid of SDC blades, he liked the original Spartan, then when he hit with the newer Mandalorian, he knew immediately it was a winner capable of touch and power play. I had to use a hydraulic press to get the Mandalorian outta hiz pawz.
Using them, no need to be afraid.....playing against....whole different story!

I would be entertained seeing High Toss B-stard looping with the Hinoki/ALC/Balsa rocketship....or is it BH Man....or...... :)

 
Last edited:
  • Haha
Reactions: Der_Echte
Top