Results 701 to 720 of 1126
-
This user has no status.This user has no status.
-
This user has no status.This user has no status.
-
06-02-2021 1622644731 #703
Hi Sergio/Hipnotic,
Frequency pls as those numbers makes more sense vs the speed ratings.
For those who went into custom blades or wanted a custom blades, they would get a better understanding from frequencies because that explain the stiffness of the blade via the wood composition and types of fibers used.
Keep up the good work!
The Following 2 Users Like tt_kidz's Post:
hipnotic and Lazer
-
This user has no status.This user has no status.
-
This user has no status.This user has no status.06-02-2021 1622647750 #705
I’m the lucky owner of the blade in question. It’s my second time ordering from Sérgio and I’m seeing a risk of this becoming a habit
A brief review of the blade and the process before ordering follows:
After playing with ALC-blades for some time (roughly 18 months) I decided to go all-wood as template recommendations suggest. The Tibhar Stratus Powerwood was the blade of choice and altough it woorked for the most part I couldn’t really cope with FH loops vs. backspin (usually my strongest shot). Also the head-heaviness of the TSPW was really pronounced which I didn’t enjoy. Hence I contacted Sérgio.
We had a discussion around composition but to be honest I knew I wanted and trusted the suggestions from Sérgio. What I askes for was a larger handle (but not as monstrously large a my previous order), lower balance and a bit more speed and flex than the TSPW.
The blade arrived and I glued it with D09C FH and Rakza Z BH. It plays just as I wished for it to do. For me I think it is a reasonable compromise between what lets me win some matches and enjoy my game and what benefits my development. I have a bit more speed and lower balance than with the TSPW. My FH opening loops works again and I’m very happy about the handle. The one thing I would change (well it happen sooner or later) is asking for slightly wider wings and bottom part of the blade face. That, however is me developing as a buyer of custom blades.
As has been mentioned about Sérgios work it really is quite amazing.
The Following 4 Users Like Antonlan's Post:
hipnotic, Lazer and 2 others
-
This user has no status.This user has no status.06-02-2021 1622670119 #706
Thank you Anton 🙂
The Following 2 Users Like hipnotic's Post:
Antonlan and SamTheMan
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
says Grand Consultant to the Office of the Goon Squadsays Grand Consultant to the Office of the Goon Squad06-03-2021 1622743226 #707
Yup Anton Sérgio's work really sucks. I mean just terrible. That is why my friend ordered from him and the also made one of the most outstanding blades EVER.
Keep sucking Sérgio, the world is depending on you.
Sent from my SM-N970U using TapatalkThe Following User Likes Der_Echte's Post:
hipnotic
President, Korea Foreign Table Tennis Club. Hit us up on TTD or Facebook
http://www.facebook.com/koreaforeignttc
Janitor at NexyUSA TT Equipment Shop
http://www.nexyusa.com
View our Lame Nexy USA corporate FB page
http://www.facebook.com/nexyusa
-
This user has no status.This user has no status.06-04-2021 1622793864 #708
Custom order. Mizutani ZLC inspired composition with a simple and classic handle look.
Composition: Limba / ZLC / Ayous / Kiri / Ayous / ZLC / Limba
Weight: 88.3g
Thickness: 5.70mm
Freq,: 1442Hz
Balance: 2.3cm (Low)
The Following 3 Users Like hipnotic's Post:
Lazer, Manto76 and 1 other
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
This user has no status.This user has no status.06-04-2021 1622798397 #709
The Following User Likes Manto76's Post:
hipnotic
-
This user has no status.This user has no status.06-04-2021 1622817042 #710
It looks pretty good. Nice one. Keep sharing.
The Following User Likes mounika380's Post:
hipnotic
-
This user has no status.This user has no status.06-04-2021 1622819640 #711
-
This user has no status.This user has no status.06-04-2021 1622844606 #712
The Following User Likes hipnotic's Post:
UpSideDownCarl
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
This user has no status.This user has no status.06-07-2021 1623051909 #713
The difference a top ply makes. Blue fig is soft, almost as soft as Ayous, so even at 6.15mm this blade is not stiff at all. The feeling is relatively soft, but speed wise it is faster than the frequency reading suggests, probably in the Off- range.
Available FS.
Composition: Blue Fig / Ayous / ALC / Ayous / ALC / Ayous / Blue Fig
Weight: 88.3g
Thickness: 6.15mm
Freq.: 1160Hz
Balance: 3.0cm (Med)
The Following 3 Users Like hipnotic's Post:
JEANJB, Metaxa and 1 other
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
This user has no status.This user has no status.06-07-2021 1623079344 #714
This handle reminds me of Ross Leidy style. Very nice!
-
This user has no status.This user has no status.
-
This user has no status.This user has no status.06-10-2021 1623311374 #716
Damn Padauk, why you so pretty?
Composition: Limba / Ayous / SZLC / Kiri / SZLC / Ayous / Limba
Weight: 88.6g
Thickness: 5.80mm
Freq.: 1400Hz
Balance: 2.4cm (Low)
The Following User Likes hipnotic's Post:
Manto76
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
This user has no status.This user has no status.06-14-2021 1623658626 #717
I see some interest in combi blades so here's one I recently made. This one is inner Limba/ALC on one side and outer ZLC/Koto on the other, with an Ayous core. The difference in composition is not big enough to create a massive speed distinction between sides. However, there is definitely a difference in feel, with the Koto side being more direct. Speed wise it is probably in the Off-/Off range.
Available FS.
Composition: Limba / Ayous / ALC / Ayous / Ayous / ZLC / Koto
Weight: 89.6g
Thickness: 5.75mm
Freq.: 1320 Hz
Balance: 3.3cm (Med)
The Following 2 Users Like hipnotic's Post:
Der_Echte and shinshiro
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
This user has no status.This user has no status.06-17-2021 1623914788 #718
This reminds me of something 🤔
Composition: Framiré / Aramid / Framiré / Kiri / Framiré / Aramid / Framiré
Weight: 82.5g
Thickness: 5.65mm
Freq.: 1356Hz
Balance: 2.4cm (Low)
The Following 2 Users Like hipnotic's Post:
Manto76 and shinshiro
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
This user has no status.This user has no status.06-17-2021 1623917862 #719
-
This user has no status.This user has no status.06-17-2021 1623967405 #720www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades