Results 61 to 80 of 1068
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.10-14-2019 1571051617 #613 custom blades and 3 of my favorite compositions so far:
My most popular composition, this one goes to a club mate who wanted a second one. A solid All+ blade with great feeling and control.
Limba/Limba/Basalt Fibre/Kiri x3/Basalt Fibre/Limba/Limba - 80.7g - 5.75mm - 1140Hz
This is one has the same composition as my personal blade. The feeling i get with this blade is like nothing i ever tried before. Faster than the previous blade but the spin... so much spin!
Limba/Limba/ALC/WRC/ALC/Limba/Limba - 87.1g - 5.85mm - 1160Hz
This one is faster than the other two but not crazy fast, still very controllable. Great for over-the-table play.
Maple/Beech/GF/Balsa/GF/Beech/Maple - 72.1g - 6.4mm - 1335 Hz
The Following 5 Users Like hipnotic's Post:
BlueSkies, bobpuls and 3 others
-
Senior TTD Member 196 715
says ModiG banned PubGSenior TTD Member 715 196
says ModiG banned PubG10-15-2019 1571104582 #62
Beautiful blades
what rubbers are used with the blade?
Sent from my ONEPLUS A6010 using Tapatalk
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.10-15-2019 1571126925 #63
Thank you chintanmashroo!
Which blade do you mean? These were all custom orders so i'm not sure about the rubbers but i think the owner of the first one plays with rasanter R47 and the other two play with T05 and M2. I personally use V15 Extra on the FH and Hexer Grip on the BH.
-
SAdvanced TTD Member 168 260
This user has no status.Advanced TTD Member 260 168
This user has no status.10-16-2019 1571265152 #64
I received the blade some time ago and played with the basalt blade for a few sessions.
The blade has a very good finishing, very smooth, even on the egdes! The handle is a little shorter than Stiga's FL, but fitted perfect to my hand (I'm not very tall). Feels more towards allwood than composite, has good speed (faster than the frequency suggests). I would say that it has a medium throw angle I guess.
PS: these are impressions from a lower level player, so take them with a pinch of salt
The communication with hipnotic was very good too!The Following 4 Users Like shinshiro's Post:
BlueSkies, bobpuls and 2 others
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.11-07-2019 1573171250 #66
I've made another blade for member Magic_M. This one is my favorite composition so far, but with a straight handle. I'm really jealous of this one, i wish i could keep it
Limba/Limba/ALC/WRC/ALC/Limba/Limba - 88.7g - 5.75mm - 1170Hz
Attachment 20071
Attachment 20074The Following 3 Users Like hipnotic's Post:
BlueSkies, bobpuls and 1 other
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
NTTD Member 0 1
This user has no status.TTD Member 1 0
This user has no status.11-08-2019 1573259802 #67
These are beautiful! Outstanding craftsmanship.
I'd love to read some reviews from more users of your blades. I'm not currently in the market for a new blade but I am a collector and have always wanted to try a custom blade. I'm also super curious how much you charge
-
FTTD Member 13 79
This user has no status.TTD Member 79 13
This user has no status.11-09-2019 1573289846 #68
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.11-09-2019 1573323856 #69
Thank you Nuise. I haven't built many blades for forum users, that's why i don't have much feedback here yet. I have sold mostly locally and those costumers are very happy. If you want to know prices just PM me.
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.11-09-2019 1573324071 #70
Yes fanott, the core ply is made of 2 pieces. That's very normal among blade builders because it's very difficult to find pieces wide enough to use a single piece. This has already been discussed in several threads and It doesn't affect performance, if anything i think it even makes it better.
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
Advanced TTD Member 70 463
This user has no status.Advanced TTD Member 463 70
This user has no status.11-10-2019 1573418071 #71
Do you make combi blades: one side pips in & the other side for LP?
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.
-
Advanced TTD Member 70 463
This user has no status.Advanced TTD Member 463 70
This user has no status.11-11-2019 1573478212 #73
Could you elaborate more what materials do you choose to make it?
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.11-11-2019 1573508078 #74
Well, that is very subjective and hard to answer. What kind of pips do you use? Do you play a passive or active game? I think it's easier the other way around, you can tell me what you need and expect the blade to do and I try to come up with a composition. If you want you can PM me with more details.
The Following User Likes hipnotic's Post:
UpSideDownCarl
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.11-11-2019 1573509447 #75
2 custom blades for a friend of mine
The first one is "Apolónia" inspired, but he wanted something a little faster and harder. He also wanted the Portuguese flag in the handle.
Limba/Anigre/ALC/Ayous/ALC/Anigre/Limba - 93.0g - 5.95mm - 1370Hz
Attachment 20093
The second blade is "Ovtcharov TC" inspired but he wanted something less reactive and fast. He also wanted the Azores flag in the handle.
Anigre/ALC/Limba/Kiri/Limba/ALC/Anigre - 86.0g - 5.60mm - 1370Hz
Attachment 20096www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
Senior TTD Member 1,176 860
This user has no status.Senior TTD Member 860 1,176
This user has no status.11-11-2019 1573509738 #76
Asking for a friend here but legitimately, where are you getting carbon layers to put in there?
Blades look great BTWMy youtube channel of various games & highlights from club throughout the years:
http://bit.ly/2NDjqd4
-
Elite TTD Member 1,467 1,067
This user has no status.Elite TTD Member 1,067 1,467
This user has no status.11-11-2019 1573510359 #77
Well, at first i got them from Aliexpress just to experiment but now i buy them here: https://www.castrocompositesshop.com/pt/
The Following User Likes hipnotic's Post:
suds79
www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades
-
Advanced TTD Member 70 463
This user has no status.Advanced TTD Member 463 70
This user has no status.11-12-2019 1573558076 #78
I post here because can be of interest for other members.
L.S.D. long pips
Hurricane III national / Fastarc G-1
Actually I use Stiga All Round Classic WRBLast edited by merlin el mago; 11-12-2019 at 10:44 AM.
-
Super Moderator 16,481 15,054
says I like to hit Heavy TopspinSuper Moderator 15,054 16,481
says I like to hit Heavy Topspin11-12-2019 1573570704 #79
The Following User Likes UpSideDownCarl's Post:
bobpuls
Setup 1: Blade by Nate: Vortex Spin Machine, FH Evolution MX-K, BH Evolution FX-P
Setup 2: OSP Virtuoso Plus, FH Rasanter R 48, BH Rasanter R 48
Spin is Everything
-
Advanced TTD Member 70 463
This user has no status.Advanced TTD Member 463 70
This user has no status.11-12-2019 1573570919 #80
SDC Handmade
Reply to hipnotic's post
H3Neo Blue Sponge
VII Euro, Rakza 7, VJ07 Stiff
Originally Posted by shinshiro
