NBlades

Nico_03 · Oct 28, 2020

Another blade finished:
•limba/alc/spruce/Kiri/spruce/alc/limba
•6,5mm - 157x150mm
•88g center balanced
•1500Hz off+

P1ngP0ng3r · Oct 28, 2020

Nice looking blade. Well done.

lodro · Oct 28, 2020

very nice blades.

just an idea: After washing my rubbers i like to stand up my blades to let the last water residues dry up.
With the metal sign at the end , the blade won't stand on its own and will need to be supported
cheers

Nico_03 · Oct 28, 2020

Thank you P1ngP0ng3r

Thank lodro for this advice. I think for my next blades I will put a lens in the handle.
At the moment I continue to put the plates at the end because I ordered 30, then I will stop it

Nico_03 · Nov 1, 2020

Composition: Limba/ayous/alc/ayous/alc/ayous/limba
Weight: 87g
Thickness: 5.88mm
Freq.: 1335 Hz
Balance: Center

Nico_03 · Nov 1, 2020

I made 3 test blades with the same composition (limba/ayous/ayous/ayous/limba) but with different glues.
Now I have to test them!

1/ Handmade hide glue. It’s the glue I usually use.
Weight: 77g
Freq.: 950Hz

2/ Titebond hide glue. I try it to see if the blade has the same characteristics as the handmade hideglue.
If yes I will use it because it’s time saving.
Weight: 74g
Freq.: 1050Hz

3/ Fish glue
Weight: 78g
Freq.: 1050Hz

EyyT · Nov 5, 2020

I am curious, where do you get the carbon fibers?

EyyT · Nov 5, 2020

I think you should check out a brand called PP (pro-pro) is a taiwanese guy who do the same as you he builds blades and sell.
https://www.ping-pong.tw/

Nico_03 · Nov 5, 2020

Thank you for the link! I didn’t know this brand.

I buy it to a store in my city. But you can easily find it on the web

EyyT · Nov 6, 2020

Nico_03 said:
Thank you for the link! I didn’t know this brand.

I buy it to a store in my city. But you can easily find it on the web

He has some very expensive japanese hinoki blades

Nico_03 · Nov 7, 2020

Composition: Limba/ayous/alc/ayous/alc/ayous/limba
Weight: 90g
Thickness: 5.88mm
Freq.: 1300 Hz
Balance: Head

Nico_03 · Nov 8, 2020

Composition: Black Limba/limba/ayous/limba/black limba
Weight: 73/74g
Thickness: 5mm
Freq.: 1150 Hz
Balance: Center/Head

Nico_03 · Nov 10, 2020

HINOKIIIII !!!!

At the moment, I only have 0,6mm sheets

wappak · Nov 11, 2020

Nico_03, those blades you made are very beautiful, may I know what glue are you using to make blades?

Sent from my vivo 1906 using Tapatalk

Nico_03 · Nov 11, 2020

Thank you!

It will depend on the needs of the player. I use hide glue, Titebond glues, fish glue, epoxy...

bobpuls · Nov 11, 2020

Hi and welcome in the blade building business!
Where you get the hinoki if i may ask. Thanks

Nico_03 · Nov 11, 2020

Thank you Bobpuls!

I searched a lot without results... It’s very complicated to find it for an individual because japaneses are introverted and a lot don’t have a web site or don’t speak English.

So I decided to contact a friend of my brother who lives in Japan. He found a local craftsman and bought some sheets. Then he sent it to France.

Nico_03 · Nov 14, 2020

Custom Goriki 157x150
Weight: 91g
Freq.: 800 Hz
Balance: Center

After some tests I noticed that the blade has 2 speeds. When I apply a little pressure the rebound is high and I feel that the blade is fast. But when I amortize (I hope it’s the right word), the rebound is much lower and the ball floats.

Nico_03 · Nov 15, 2020

I asked to a moderator if I can sell some blades on the forum so I created a new thread named "FS-Nblades: Handmade Blades by Nico_03"

https://www.tabletennisdaily.com/forum/showthread.php?24404-FS-NBlades-Handmande-Blades-by-Nico_03

Nico_03 · Nov 20, 2020

NBlades

Member

Member

Well-Known Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Well-Known Member

Member

Member

Member

Member

Similar threads