This user has no status.
This user has no status.
Puh, Carl... I thought he meant additional "lacquering" which would change the characteristics of the top ply radically (make it much, much harder). The water based Joola varnish/sealant doesn't change the properties of the top ply in a negative / perceptible way.The actual answer should be: THE JOOLA PRODUCT WAS THE SEALANT. I called it varnish. But the product sealed the top ply of my blade.
Puh, Carl... I thought he meant additional "lacquering" which would change the characteristics of the top ply radically (make it much, much harder). The water based Joola varnish/sealant doesn't change the properties of the top ply in a negative / perceptible way.
Yep. It was confusing.
I just buy butterfly blades. I think they come sealed right?
Butterfly blades are not sealed. But their finishing quality is very good and, for splintering, they usually don't need a layer of sealant. However, the water from the glue will still effect the wood.
Do you know anything about xiom blades too? like their quality, do they need to be sealed or not and so on.Butterfly blades are not sealed. But their finishing quality is very good and, for splintering, they usually don't need a layer of sealant. However, the water from the glue will still effect the wood.
I have a 5x and 968 and I haven't had any splintering issues. I haven't used any lacquer or sanding technique. I have used a variety of glue like Revolution 3, DHS 15, falco premium, and free chack 2
Do you know anything about xiom blades too? like their quality, do they need to be sealed or not and so on.
Tbh I'm curious of a new upcoming xiom blade which is similar to w968/long V I predict. Korean youngsters an jaehyun has already been using it and he previously uses long V so this will be similar to it more or less. A new blade has already been sold on offical xiom korean website but not sure whether it's the one AnJH is using. But the handle seems very close.
Thanks again for your feedbackI think I have said this before. But I am not sure you understand what I am saying.
There are people here who are saying “you have to seal” a specific blade to protect from splintering, and then another person comes along and says, “I have that blade and I didn’t seal it and it is fine….so you don’t have to seal any blades.”
So this is a choice. If you want to seal, seal. If you don’t want to seal, don’t seal. YOU DECIDE. All people can tell you, if they actually want to be helpful is what the pros and cons of sealing are so you can make an informed decision. But the decision is not really all that important in the scope of things.
All blades CAN be sealed. NO blades NEED to be sealed. It is a personal preference.
So, to simplify
Pros of sealing:
1) protects the wood from water damage
2) protects top ply from splintering
Cons of sealing:
1) a bit of a hassle (if you don’t have all you need and know how to do it)
2) some people fear it will change the playing characteristics
As far as Xiom Blades are concerned, the Xiom blades I have tried are of an excellent build quality.
I have a 5x and 968 and I haven't had any splintering issues. I haven't used any lacquer or sanding technique. I have used a variety of glue like Revolution 3, DHS 15, falco premium, and free chack 2
Which glue do you suggest using for long V with hurricane blue sponge rubbers? Is dhs aquatic no.15 good for those?
One last question please since I forgot to add in mu previous reply. Do xiom blades also have good finishing quality like butterfly's?Butterfly blades are not sealed. But their finishing quality is very good and, for splintering, they usually don't need a layer of sealant. However, the water from the glue will still effect the wood.
One last question please since I forgot to add in mu previous reply. Do xiom blades also have good finishing quality like butterfly's?
The South Korean made ones are pretty close to Butterfly quality in general. But some of my friends had some issues with outer carbon construction blades where the limba peeled up. But I've seen this happening with most brands including BTY.
I have several DHS blades but never happened with them even with really evil glues. And I'm not talking about W968 or so high end blades, just a Fang Bo carbon and the Fang Bo 2X, their limba top is really above everyone else.
As far as Xiom Blades are concerned, the Xiom blades I have tried are of an excellent build quality.
One last question please since I forgot to add in mu previous reply. Do xiom blades also have good finishing quality like butterfly's?
It seems you miss things or something or need them repeated several times. But I definitely did answer this question already so I am just showing the answer in a quote.
Ohh I see. I like the w968/long V but just due to some reviews saying about it splintering that’s the reason why I’m quite hesitate to purchase or else it’s a no brainer for me. I’m still waiting for the new xiom blade as well. I’ll definitely buy an inner carbon blade no sure whether it’ll be long V or xiom’s new blade, still longing for it to come. If so, do you suggest buying w968 and using it without sealing? And which glue do you personally use?The South Korean made ones are pretty close to Butterfly quality in general. But some of my friends had some issues with outer carbon construction blades where the limba peeled up. But I've seen this happening with most brands including BTY.
I have several DHS blades but never happened with them even with really evil glues. And I'm not talking about W968 or so high end blades, just a Fang Bo carbon and the Fang Bo 2X, their limba top is really above everyone else.
Ohh I see. I like the w968/long V but just due to some reviews saying about it splintering that’s the reason why I’m quite hesitate to purchase or else it’s a no brainer for me. I’m still waiting for the new xiom blade as well. I’ll definitely buy an inner carbon blade no sure whether it’ll be long V or xiom’s new blade, still longing for it to come. If so, do you suggest buying w968 and using it without sealing? And which glue do you personally use?
I wouldn't seal any blade. I don't know what blade is Xiom coming out with so can't really compare. But W968 construction by DHS is really good.
I use DHS no15 glue and never had an issue with it while I can't say the same from the others. The german made glues are probably the worst. Free chak 1, Andro turbo fix etc etc, they all have the same bottle, they all smell the same and they are all bad. I guess Nittaku finezip is a good alternative but DHS glue is like half price in comparison.
Which glue do you suggest using for long V with hurricane blue sponge rubbers? Is dhs aquatic no.15 good for those?
I think that the DHS glue is the best. The others work well too but I feel that DHS has the best feeling. a close competitor would be butterfly freechack 2 but that glue does not come off easily and smells really bad.
Thanks. And is it suitable to use dhs no.15 glue on other blades as well for instance like xiom blades.I think that the DHS glue is the best. The others work well too but I feel that DHS has the best feeling. a close competitor would be butterfly freechack 2 but that glue does not come off easily and smells really bad.
Revolution Nr 3 normal viscosity. Never used another glue. Does the job very well.
Thanks for your recommendation.
Why do you ask these ridiculous questions. If the glue works, IT WORKS. It makes no difference what blade.Thanks. And is it suitable to use dhs no.15 glue on other blades as well for instance like xiom blades.