This user has no status.
This user has no status.
Does anybody know the approximate weight of glue sheets when in use?
Cheers
L-zr
any specific brand ?
I can weigh you an XVT
They are probably all very similar,
please do, but its unused and uncut right?
Cheers
L-zr
Excellent, this is when they are cut or uncut?
Cheers
L-zr
Uncut sheet 6.5 inches square.
I don't know if my scale is accurate or good enough, but i ordered Donic glue sheets, i measured one and it gave me this value uncut as it is as i order not in use = 11g or 0.4Oz
Can we assume that the Donic sheets are "sandwiched" between two paper or plastic cover-sheets ?
The weight I gave above is of the "glue-part only ", without the cover-sheets.
Can we assume that the Donic sheets are "sandwiched" between two paper or plastic cover-sheets ?
The weight I gave above is of the "glue-part only ", without the cover-sheets.
Ok, got it, i didn't open the sheet as i don't want to make it dirty or useless for use, i will give it to he coach to use it for gluing, maybe i will ask him to weigh it if that can help in anything, not sure if he has a scale anyway or if he is interested in to do so.
I really want to know which brand of glue sheet is recommended, i bought Donic because it has an offer and the coach said he used two brands including this Donic and it is very good enough, so i did, was thinking about Nittaku one which is slightly more price, but if all can do the job just the same then no point to go with more expensive one then.
Ok, got it, i didn't open the sheet as i don't want to make it dirty or useless for use, i will give it to he coach to use it for gluing, maybe i will ask him to weigh it if that can help in anything, not sure if he has a scale anyway or if he is interested in to do so.
I really want to know which brand of glue sheet is recommended, i bought Donic because it has an offer and the coach said he used two brands including this Donic and it is very good enough, so i did, was thinking about Nittaku one which is slightly more price, but if all can do the job just the same then no point to go with more expensive one then.
I tell you my little secret 😁
The 2 outer sheets come in handy for all kinds of things so i always keep them.
So all I have to do then is weigh the complete new sheet and then deduct the weight of the 2 paper sheets only.
I do not know it, but was told that the good quality Glue-sheets have different strengths of glue , not the same strength on both sides. This is why they tell you which side to attach to the blade first, trim it and then attach the rubber to the blade.
I only ever used the XVT, a cheap version and they have the same strength of glue on both side AND it is very strong.
When you want to take the rubber off the blade often bits of sponge get ripped out .
This is why I stopped using XVT - glue-sheets.
Now I use glue.
I tell you my little secret 😁
The 2 outer sheets come in handy for all kinds of things so i always keep them.
So all I have to do then is weigh the complete new sheet and then deduct the weight of the 2 paper sheets only.
I do not know it, but was told that the good quality Glue-sheets have different strengths of glue , not the same strength on both sides. This is why they tell you which side to attach to the blade first, trim it and then attach the rubber to the blade.
I only ever used the XVT, a cheap version and they have the same strength of glue on both side AND it is very strong.
When you want to take the rubber off the blade often bits of sponge get ripped out .
This is why I stopped using XVT - glue-sheets.
Now I use glue.
The problem is that i tested once a blade that is not mine, it has LP one side OX, and i don't know at all how a coach glued it [i don't know who is the coach and how he did it], i only used that racket for fun while i was coaching few players of the club, but i left the coaching and i still kept the blade with me until i felt guilty and returned it to the club secretly, but i got the time to test it enough for about 3-4 months and picture it, so i bought same blade and rubber, i can't tell if it was glued with sheet or regular liquid glue.
The coach i know do fix a lot of blades and know what he is doing, he is from Europe, and a coach in a club, so i can trust that he knows what he is doing really, i hope that blade he assembled for me to mimic that blade i tested can be as good or even better, at least of that LP side, and i ordered more blades and LP rubbers OX, so i don't know if they all must be used with glue sheet only, and i trust the coach knowing how to glue them with which side, most are cheap rubbers such as Neptune LP or even that Yasaka Phontom LP of the one i tested, i ordered the sheets so he doesn't charge me for those at higher prices than the net.
What the package weighs is not of interest. I was interested to see how much difference it would make compared to ordinary glue.I don't know if my scale is accurate or good enough, but i ordered Donic glue sheets, i measured one and it gave me this value uncut as it is as i order not in use = 11g or 0.4Oz
They are kind of expensive here but when using thin sponges there is a point. I may get me some…🙏 pleasure
They are kind of expensive here but when using thin sponges there is a point. I may get me some…
Cheers
L-zr
https://www.aliexpress.com/item/32630800178.html?pdp_ext_f=%7B%22sku_id%22:%2259460737040%22,%22ship_from%22:%22%22%7D&gps-id=pcStoreJustForYou&scm=1007.23125.137358.0&scm_id=1007.23125.137358.0&scm-url=1007.23125.137358.0&pvid=49c397e1-4ff8-4d07-829e-22dcab95afc8&spm=a2g0o.store_pc_home.smartJustForYou_215222185.19
Probably about 5 Euros for a packet of 10 incl. postage.
I now only use them when I fit rubbers for players who use their rubbers until they need throwing away.
For somebody who is still experimenting with lots of different rubbers and blades which involves removing and re gluing very frequently glue is the better choice..
These glue-sheets are very strong and make the rubbers stick to the blade like the proverbial shit to a blanket 😁
But you can’t boost with glue sheet!
🙃
Of course you can 😂