SDC Handmade Blades

says Spin and more spin.
says Spin and more spin.
Well-Known Member
Super Moderator
Dec 2010
16,146
17,685
54,747
Read 11 reviews
Custom order.

- Limba / SZLC / Limba / Kiri / Limba / SZLC / Limba
- 92.2g
- 6.05mm
- 1590Hz
- Balance: 2.8cm (Low)

358%201%20jpg.jpeg


358%202%20jpg.jpeg


358%204%20jpg.jpeg

That is really beautiful.

 
This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947
This is a blade with a unique design, very different from a common 3+2 composition. Normally the core of a blade is placed with the grain vertically aligned, but here I'm using a horizontal core. This results in a more flexible blade, with more touch at the expense of some speed. The fiber is Textreme-Carbon 90 g/m2, placed at 45º, which also gives more flexibility than if was placed at 90º as usual. So, in the end all the layers are crossed, which gives a very nice sweet spot. It's not a fast blade, but it has a compact feeling, not usually found in blades of this speed class.

- Hinoki / TC90 - 45º / WRC / TC90 - 45º / Hinoki
- 75g
- 6.3mm
- 1184Hz
- 3.2cm (Med)

419%201%20jpg.jpeg


419%202%20jpg.jpeg


419%203%20jpg.jpeg
 
Last edited:
This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947
Is this joint on top ply from two veneers or single one?....
From esthetic side is this what gives the difference between custom and factory build.... Not to mention quality.
It is a single veneer, some of my Hinoki veneers have that darker stripe.

Sent from my MAR-LX1A using Tapatalk
 
This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947
Vis composition but with some minor structural changes, namely a slightly thinner top ply and a thicker core. Paired with AxC, the blade has an higher stiffness but feels softer than if regular AC was used. It also reduces the weight a bit and allows the use of Ebony in the handle, which feels great in the hand and brings the balance down.

Available FS.

- Koto / AxC/ Ayous / Kiri / Ayous / AxC / Koto
- 87.5g
- 5.7mm
- 1528Hz
- Balance: 1.9cm (Very Low)

429%201%20jpg.jpeg


429%202%20jpg.jpeg


429%203%20jpg.jpeg
 
says Spin and more spin.
says Spin and more spin.
Well-Known Member
Super Moderator
Dec 2010
16,146
17,685
54,747
Read 11 reviews
Custom order, Schalger Carbon style.

- Hinoki / Super-Carbon / Kiri / Super-Carbon / Hinoki
- 7.3mm
- 98.5g
- 1850Hz
- Balance: 2.3cm (Low)

363%201%20jpg.jpeg


363%202%20jpg.jpeg


363%203%20jpg.jpeg

Is what you are calling "Super Carbon" the Tamca 5000 carbon?

I say you call that thick outer ply of Hinoki "Super Hinoki". :)

 
This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947

Is what you are calling "Super Carbon" the Tamca 5000 carbon?

I say you call that thick outer ply of Hinoki "Super Hinoki". :)

Tamca 5000 is a 200 g/m2 (or close to that) carbon, which is the same I'm using here. I just call it that because I also use lighter versions. It does sound a little gimmicky, there's nothing super about it, it is what it is, but people are used to this "super" terminology from Butterfly blades.

The Hinoki is indeed super, I don't have many veneers with 1.2mm.

 
  • Like
Reactions: bobpuls and yoass
says Hi In first i want to thank you for your interest...
says Hi In first i want to thank you for your interest...
Well-Known Member
Feb 2015
1,431
916
5,318
Read 6 reviews
I also did use Max 160gm2 carbon with the other bond for stronger feeling .. But mostly I'm try to use 90gm2/120 carbons.... I do not see usage for low or med players to use heavy carbons because they do not have strength and feelings for it.
 
  • Like
Reactions: hipnotic
This user has no status.
This user has no status.
Well-Known Member
Dec 2011
1,383
2,127
3,947
Another blade with Glass-fiber, this time a 100 g/m2 fabric. The feeling is basically like an all wood blade, but the GF helps to control some of the bad vibration on this classic composition. The head size is also slightly larger to help generate more momentum in a controlled, spin based play style.

- Limba / GF100/ Limba / Ayous / Limba / GF100 / Limba
- 87.0g
-5.85mm
- 158x152mm
- ST (23.8x101x28.0mm)
- 1270Hz
- Balance: 2.8cm (Low)

418%201%20jpg.jpeg


418%202%20jpg.jpeg


418%203%20jpg.jpeg
 
Last edited:
  • Like
Reactions: Metaxa and Haraold
Top