Greetings from a SANWEI Official

This user has no status.
Is it possible for you to measure the center of gravity on sanwei froster PBO? If you lay it on the edge of table without rubbers, how far can it go out while still balancing? (cm from handle) Is the headsize 150x157 or more?
We used some special techniques to make the Froster Pbo
The center of gravity of the Froster Pbo becomes closer to the hand, but we can't give you a definite value. The storage time of the wood and the moisture content, which is uncontrollable. But we can guarantee that under the same variable premise, the center of gravity of the Froster Pbo is closer to hand.
 
This user has no status.
Is it possible for you to measure the center of gravity on sanwei froster PBO? If you lay it on the edge of table without rubbers, how far can it go out while still balancing? (cm from handle) Is the headsize 150x157 or more

Maybe it could help you. We made a gracity test for EX-C Froster PBO.
 
Last edited:
says MIA
says MIA
Well-Known Member
Nov 2016
2,132
1,102
11,017
Hi Andrea, great to have your here!

I've always been interested in Sanwei products but it was hard finding information.

What is the full composition and thickness of the following blades:

EX-C Froster PBO
EX-C Froster
EX-C Paramid
Fextra One
Fextra Allround
V5 Pro
CS
Accumulator S
Accumulator J
Accumulator C
A9
C&C
F1 Classic
F3 Classic
F3 Pro
HC-5S
HC-1S
LD Light
Defense Alpha
 
Last edited:
  • Like
Reactions: maxposa
This user has no status.
Hi Andrea, great to have your here!

I've always been interested in Sanwei products but it was hard finding information.

What is the full composition and thickness of the following blades:

EX-C Froster PBO
EX-C Froster
EX-C Paramid
Fextra One
Fextra Allround
V5 Pro
CS
Accumulator S
Accumulator J
Accumulator C
A9
C&C
F1 Classic
F3 Classic
F3 Pro
HC-5S
HC-1S
LD Light
Defense Alpha

Hello Thomas,

Glad to hear you are interested in our product. In fact, we've been posting this information piecemeal on our tw, fb and ins.
Please follow us on these platforms.

EX-C Froster PBO 6.0 mm +/-0.1 mm
EX-C Froster 6.0 mm +/-0.1 mm
EX-C Paramid 5.5 mm +/-0.3 mm
Fextra One 6.0 mm +/-0.3 mm
Fextra Allround 6.0 mm +/-0.3 mm
V5 Pro 6.2 mm +/-0.3 mm
CS 6.2 mm +/-0.3 mm
Accumulator S 6.0 mm +/-0.3 mm
Accumulator J 7.0 mm +/-0.3 mm
Accumulator C 7.0 mm +/-0.3 mm
A9 6.0 mm +/-0.3 mm
C&C 6.5 mm +/-0.3 mm
F1 Classic 6.2 mm +/-0.3 mm
F3 Classic 6.2 mm +/-0.3 mm
F3 Pro 5.5 mm +/-0.3 mm
HC-5S 6.0 mm +/-0.3 mm
HC-1S 6.0 mm +/-0.3 mm
LD Light 8.5 mm +/-0.3 mm
Defense Alpha 6.0 mm +/-0.3 mm

 
  • Love
Reactions: thomas.pong
says MIA
says MIA
Well-Known Member
Nov 2016
2,132
1,102
11,017

Hello Thomas,

Glad to hear you are interested in our product. In fact, we've been posting this information piecemeal on our tw, fb and ins.
Please follow us on these platforms.

EX-C Froster PBO 6.0 mm +/-0.1 mm
EX-C Froster 6.0 mm +/-0.1 mm
EX-C Paramid 5.5 mm +/-0.3 mm
Fextra One 6.0 mm +/-0.3 mm
Fextra Allround 6.0 mm +/-0.3 mm
V5 Pro 6.2 mm +/-0.3 mm
CS 6.2 mm +/-0.3 mm
Accumulator S 6.0 mm +/-0.3 mm
Accumulator J 7.0 mm +/-0.3 mm
Accumulator C 7.0 mm +/-0.3 mm
A9 6.0 mm +/-0.3 mm
C&C 6.5 mm +/-0.3 mm
F1 Classic 6.2 mm +/-0.3 mm
F3 Classic 6.2 mm +/-0.3 mm
F3 Pro 5.5 mm +/-0.3 mm
HC-5S 6.0 mm +/-0.3 mm
HC-1S 6.0 mm +/-0.3 mm
LD Light 8.5 mm +/-0.3 mm
Defense Alpha 6.0 mm +/-0.3 mm

Thank you very much for this Andrea!

This is useful. I personally can't by a blade without knowing its thickness first.

Can you also share the composition for each of these blades?



 

Thank you very much for this Andrea!

This is useful. I personally can't by a blade without knowing its thickness first.

Can you also share the composition for each of these blades?


Just asking
how thicker will it taste?
even if it gets thinner how does it feel?
where is the effect?

i need to know for my knowledge, because i am new to table tennis.

 
says MIA
says MIA
Well-Known Member
Nov 2016
2,132
1,102
11,017

Just asking
how thicker will it taste?
even if it gets thinner how does it feel?
where is the effect?

i need to know for my knowledge, because i am new to table tennis.

For me personally, most blades that are thicker than 5.8mm feel too hard, I like to feel the ball and a blade 5.7mm or thinner usually has more feel and is more flexible. I also tend to favor a limba top ply (softer) then koto (harder).

 
This user has no status.

Thank you very much for this Andrea!

This is useful. I personally can't by a blade without knowing its thickness first.

Can you also share the composition for each of these blades?



Hello, my friend. These are the structures of our popular products.

EX-C Froster PBO Koto-pbo fiber- ayous- kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Arylate carbon - Ayous core
Fextra One Limba-limba-ayous- ayous core
Fextra Allround Limba-Meranti-kiri core
Accumulator S Array- basswood-kiri core
Accumulator J Koto- spruce- kiri core
Accumulator C Ayous- basswood- light carbon- kiri core
C&C Limba- basswood- LD carbon- kiri core
 
says MIA
says MIA
Well-Known Member
Nov 2016
2,132
1,102
11,017
Hello, my friend. These are the structures of our popular products.

EX-C Froster PBO Koto-pbo fiber- ayous- kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Arylate carbon - Ayous core
Fextra One Limba-limba-ayous- ayous core
Fextra Allround Limba-Meranti-kiri core
Accumulator S Array- basswood-kiri core
Accumulator J Koto- spruce- kiri core
Accumulator C Ayous- basswood- light carbon- kiri core
C&C Limba- basswood- LD carbon- kiri core
That's great, thank you Andrea!
 
Halo temanku. Ini adalah struktur produk populer kami.

EX-C Froster PBO Koto-pbo fiber- ayous-kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Karbon Arylate - inti Ayous
Inti Fextra One Limba-limba-ayous-ayous
Inti Fextra Allround Limba-Meranti-kiri
Accumulator S Array- inti basswood-kiri
Akumulator J Koto- inti cemara-kiri
Akumulator C Ayous- basswood- karbon ringan- inti kiri
C&C Limba- basswood- LD karbon- inti kiri
nice fast and spinning.
which blades?
 
This user has no status.
Hello, my friend. These are the structures of our popular products.

EX-C Froster PBO Koto-pbo fiber- ayous- kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Arylate carbon - Ayous core
Fextra One Limba-limba-ayous- ayous core
Fextra Allround Limba-Meranti-kiri core
Accumulator S Array- basswood-kiri core
Accumulator J Koto- spruce- kiri core
Accumulator C Ayous- basswood- light carbon- kiri core
C&C Limba- basswood- LD carbon- kiri core
Thank you Andrea,
as a satisfied user of the C&C blade, I am now happy to know the composition of all layers!!
 
This user has no status.
This user has no status.
Member
Jul 2018
129
84
258
Hi Andrea,

Can you share with us the trusted distributors for Sanwei products in Asia?

I am interested in trying gear hyper but I can't seem to find an online shop in Asia that sells it
 
  • Like
Reactions: thomas.pong
Top