Someting similar to Xiom HAL?

This user has no status.
This user has no status.
Member
Sep 2022
24
13
87
Does anyone perhaps know if there is an inexpensive Chinese blade with a construction similar to the Xiom Calderano HAL (Koto top layers and a woven fiber instead of carbon fiber)?
I've been tempted by the HAL blade for a while but as I've never played with Koto I'd prefer to test such a configuration beforehand without spending a lot of cash.
 
This user has no status.
This user has no status.
Active Member
Oct 2020
538
465
1,444
According to TT Gearlab, the Donic Persson PowerPlay has similar characteristics:

TTGL data.png


Basically what these numbers indicate is that the Hugo HAL is faster than the PPP, and that it feels very slightly harder, but that their playing characteristics are almost identical.

Given that you can probably pick up a PPP at around EUR30, it may be worth a try?

See links below for the TT Gearlab numbers used above:

 
Last edited:
  • Love
Reactions: Peppa Pig
This user has no status.
This user has no status.
Active Member
Feb 2023
533
561
1,621
Does anyone perhaps know if there is an inexpensive Chinese blade with a construction similar to the Xiom Calderano HAL (Koto top layers and a woven fiber instead of carbon fiber)?
I've been tempted by the HAL blade for a while but as I've never played with Koto I'd prefer to test such a configuration beforehand without spending a lot of cash.
At this moment there are two blades. Timo Boll ZLF from butterfly and Victas ZX Gear-Fiber. Both are outer construction with fiber w/o carbon and with standard head size 157x150.
 
  • Like
Reactions: Peppa Pig
This user has no status.
This user has no status.
Member
Sep 2022
24
13
87
In terms of outer koto and non carbon fibre, the xiom zl pro comes to mind, but here the fibre is as an inner construction while the hal is an outer fibre blade. I know xiom is not Chinese, but at least it is half the price of the hal often enough
Thanks, the blade seems interesting indeed. And this series is manufactured in China, which is probably why its price is much lower than the HAL.
 
This user has no status.
This user has no status.
Member
Sep 2022
24
13
87
Not extremely cheap but perhaps Xiom hayabusa ZL pro? it's a fibre rather than a carbon i assume it is similar to the HAL but havent used HAL before. i played with zl pro for a while its nice, very lightweight mine was 80g
Please, can you tell me if this blade is significantly slower than Innerforce ALC?
80g is the perfect weight for me, as I have some injuries and can't use heavy blade (my current blade also weighs 80g).
 
This user has no status.
This user has no status.
Member
Oct 2022
355
507
2,187
Please, can you tell me if this blade is significantly slower than Innerforce ALC?
80g is the perfect weight for me, as I have some injuries and can't use heavy blade (my current blade also weighs 80g).
i didn't feel a big difference in speed close to the table, but where i felt the blade lacks a bit is when i was far from the table doing fh topspin to topspin and things like that, i didnt feel much power in the ball. maybe i wasn't used to using such a light setup? i'd never used a blade this light before so my opinion might be bias.

for close to table play this blade is excellent with nice speed, i would still use it if i didnt like to go back from table sometimes. overall i liked using this blade and think its worth a try

ps: im not sure if my blade was abnormally light so double check with your retailer that 80g is a weight they can supply :p
 
  • Like
Reactions: Peppa Pig

K.K

This user has no status.

K.K

This user has no status.
Member
Aug 2024
205
184
553
since i play hugo HAL i can attest you that donic PPP plays nothing like it. HAL is way stiffer and way faster with a lower trajectory. HAL plays more like an easier to play outer carbon blade while PPP plays like a slighty stiffer 5ply allwood. Falcima same as PPP but stiffer and faster... still an allwood blade bounce and trajectory. the only real close thing is timo boll ZLF but for me HAL has more pop and zip and better support in half distance, while ZLF felt a bit dry and empty. the reason i chose it over ZLF (besides the better handle of HAL)

when i tried zylon compared to arylate blades, i noticed that they have way more catapult and bounce, same with innercarbon compared to outercarbon. so if you would get the xiom ZL pro i can imagine that it will play really different compared to HAL just because the different construction.

maybe you could try those CNF blades, they have mostly same construction but instead of dark limba like HAL they have ayous as third layer, so we could think they will be more flexible and with less power in half distance and if you want a light one you will have problems to find one that doesn't feel empty. but take that with a grain of salt since i never played with one. i think there is one blade by LOKI that is CNF if i remember correctly, maybe you can ask in the loki chat if someone played with it. most cnf blades tend to cost a fortune
 
Last edited:
Top