Tibhar Drinkhall Powerspin Carbon

I've been using this blade with tibhar evolution ELS on both sides however I would recommend using a slower rubber such as the evolution FXP or FXS with this blade as it is already fast enough and any faster rubber makes it hard to control unless you are a very high standard player.

I feel it's best strengths are flicking, open ups and counter top spins as this blade suits a more close to mid range offensive player. When flicking the ball the blade really directs the ball well and even against a weak backspin touch you can flick through the ball with speed and power. Whilst opening up the ball is propelled at quick a low arc causing the ball to travel to the other side faster giving the opponent less time to react. As for countering this blade seems to really be able use the opponent's power when countering to still play a fast and spinny shot with half the amount of effort you would normally use which allows you to play a fast and effective counter to win the point with less effort you would normally have to use

I think blocking with this blade for me is a bit difficult but that's probably because of the rubbers I use with it if I were to use potentially FXS or FXP then blocking would feel Easier to control and easier to guide the ball back on the table

When I first tried this blade out with an Tibhar Evolution MX-P and a Coppa Speed. I found it too fast for my liking, and made it almost impossible for me too loop with. As the ball just flew off my racket. I found it really hard to use. So when I tried it out with the aforementioned rubbers. I focused on blocking. On blocks, the speed was really good. Control was nice and the it feel unlike other ALC blades that I have used. Speedwise, this blade is around the speed of the DHS Hurricane Long 5, just a tad bit slower.

2nd time I've tried this blade, I used it with Tibhar 5Q+ and Tibhar Evolution FX-S. With the 5Q+ and the FX-S, I finally gotten to appreciate the blade. I could definitely loop with this setup. It was very easy to use. I could vary spin,speed and placement at will and I could generate a lot of spin with this blade. Advanced players would be able to use it with fast rubber like the Tibhar MX-P, just like Paul Drinkhall(it amazes me how he can control such a speed monster)... For intermediate players I'd suggest that it'll be good to pair this with medium or medium soft rubbers.

I have been using this blade for a few months now, mainly with MX-P max thickness both sides and at the minute MX-S max on forehand. It is quite a nice designed blade, smooth veneer on head of the blade and quite a thick handle (straight) which is nice I think as usually straight blades are quite thin. Very comfy in the hand and mine weighing 86g felt quite well balanced towards the handle not the head with max thickness rubbers glued on.
With the MX-P topspin strokes felt crisp and the throw (or my throw) was producing a nice arc over the net, backhand too. Touch shots were tight with good feeling and a sense you could place them short, low and accurately where you wanted even with the aggressive rubbers on. Stepping off the table a little in the top to top rallies it also felt very safe and that I could place the ball anywhere on the table, with the MX-S this was a little harder to use off the table but I would say that was down to a little less power from the rubber not the blade. Good feedback was felt too giving an extra sense of security. There are other carbon blades like the butterfly alc’s that I think have that little extra power way off the table but you also sacrifice a little control and I would rather be playing mid/at the table any way and don’t mind this minor lack of power.
Open ups against backspin using MX-P on Powerspin Carbon were easy if your stroke and footwork were spot on, a little more difficult if out of position or if you couldn’t propel the ball from your legs. I found the MX-S slightly better on this blade for opening up against backspin though, I assume from the extra grip on the rubber. I could play against many backspin balls and felt I could loop drive and win the point. Also if the opponent gave heavy loop in my direction then I could counter loop with great control and ease, if I wanted I could also just smash straight through the spin which I find quite difficult with other carbon blades.
Overall I think it’s a really nice carbon blade with good feeling and nice control, enough power for away from the table strokes but I think the rubber you use will help here to. If I were to have any negative comments it would mainly be that unless you struck the ball dead centre sometimes there would be a funny sound, or a vibration from the blade, if you are striking the ball well no problem. Maybe as already said in other reviews the slight flex from the blade caused this vibration, I don’t know but it is a little distracting for me. I would recommend this blade as it is a very good price and if you are looking to change from an all wood blade then the control this carbon blade gives will help with that transition too. It has good spin, quite a nice sweet spot and I personally (even with aggressive rubbers) think it has loads of control.

Rubbers used on the blade: Butterfly Tenergy 05-FX on both sides.
I have been using this conbination for over a couple of months now. The review is based on my thoughts on the blade after I got used to how the blade works.

I have it in flared handle and felt comfortable in hand. It felt like the most comfortable and light blade I have ever used; I tried (DHS A4002 blade, Donic Team 900 blade, Donic Schildkrot Carbotec 50, Andro Super Core Cell ALL, Joo Se Hyuk, Xiom Allround S, Stiga Carbonado 145 and Stiga Emerald VPS) in the past.

General Topspin Strokes: Due to an extended dwell time and throw angle, I first struggled to work out the angle and how much I should brush to make quality shots. After a while, I managed to get the touch of the blade and I found the ALC giving me a stable feel on the strokes. The higher throw angle certainly helped me to hit at a closed angle(10~20degrees above the horizontal to be precise ) with confidence promising the safety over the net. I like the way every shot felt nice and stable due to the carbon layer. However, I noticed a slight flex which caused some vibration(it's how I felt personally so others may think differently). Moreover, what I really liked about this blade is, the topspin against backspin was made easier despite tenergy 05fx being said to be a spin sensitive rubber. The extended dwell time gave me an increased control and did help me generate more spin with ease but personally, I would not say it is as intense as its name, 'Powerspin'. Especially with backhand topspin I whip(or give catapult effect) more than I normally do with my wrist to ensure a smooth solid brush stroke since the blade is a bit flex.

Spin In General(in match situations and when serving): Generating spin is indeed made easier as I can sense the feeling that I get when rubber generates a quality spin with minimal effort. When I serve, I normally prefer some weight on the head of the bat to have my wrist as a pivot to quicker the brushing motion as I whip my 'loosen' wrist fast. Most importantly, in match situations, considering the amount of pressure, it's not always easy to be meticulous with generating spin. However, I found this blade to be quite effective with allowing promising amount of spin in such situations as well. It would have been perfect for me if the head was little bit heavier and stiffer.


Overall: I tried this blade with Tibhar Euro Soft Grip S rubber on both sides before and it looks like Tenergy 05 or 05FX would go better with this blade. The blade could be a little more stiffer and a tiny bit heavier on the head to get a soild feel on the hits. I have tried carbonado 145 before and I would say this one certainly provides better feel and greater control. I would say it is suited for intermediate players that are spin orientated. Furthermore, some quality chopping can be done from close to the table to mid distance so could be suitable for some choppers as well but not recommended for those who chop far from the table since it has a bit of flex and is not stiff enough.


I hope you find this review helpful and enjoy the blade
<strike></strike>