Tenergy 19 vs Victas V>20 Extra or Xiom Omega 7 Pro

[disaster3]

Hi all,

I'm curious your answers and experience. I'm short of 1 piece of T19 (which is my main BH rubber and I know her characteristics), but owned above 2 from Victas/Xiom and I wonder which of those are closest to T19.
Long story short, I prepare couple of rackets to try and have always with me on trainings/tournaments.
Recently I received 3x DHS H3 Neo Prov BS 40 deg 2.1mm
1. 1 piece went to FZD ALC + D05 (boosted with these new booster I posted somewhere ) - this one was finished yesterday - I'm dying to check this combo, boosted D05 on outer layer ALC + new H3 Neo - this is for testing purpose only (don't know what the result will be 🤷‍♂️)
2. 2nd new H3N BS will go to my current blade I'm playing now (but it will be only for tournaments) q968 national + new sheet of Tenergy T19
3. 3rd new H3N BS will go to my twin q968 Prov (when it will be delivered after f*ckup from Prott) and I will slap used 6 months T19 which is still quite good (but it is not new) - this will be my training racket for training session and of course a backup if during tournaments something will happen with my q968 nat.
4. The last one is my "Safe House". I can always get back to it w/o any adjustments. I was playing it last 6 months. It is old Timo Boll ZLF with T05 on FH and T19 on BH. And yes this T19 was peeled off and moved to q986 and currently TB ZLF has only T05 on one side.

The best resolution is why don't you buy new T19? Problem solved Sure, I could but I'm fighting to not buying next TT equip. having many new unopened.
I put both rubbers (Xiom/Victas) up for sale on local auction sites but it's hard to sell it even if the price is quite competitive (this is not butterfly ) If I sold them I would buy T19 (problem solved )

Going back to main topic which of those are similar to T19 or maybe better?
And the 2nd one, if so it is better to glue it on TB ZLF or maybe this used T19 return to TB ZLF, and Xiom or Victas glue on training q968?

Thanks!

 

[disaster3]

no one 😞
Ok, FZD ALC I ready.
Q968 Nat is prepared. Today thin layer of TT lacquer Joola then a bit sanding in the meantime new DHS h3 Neo got 1st thin layer of Seamoon (sinking all night) today will get a 2nd layer of Seamoon and will go to the blade with new T19.

Old T19 was removed from q968 nat and was refreshed putting thin layer of Falco Long and will go on TB ZLF, the same will do with T05 to refresh it with thin layer of Falco Long and with fresh glue on the blade.

For Q968 Prov I’m still waiting so need to decide whether to give a try Xiom or Victas or just order T19 🤔

 

[joshmak10]

My vote is Omega 7 Pro. I’ve heard many good things about it. I considered buying a setup Xiom Cho Daeseong TMX Pro with H3 Neo Prov Blue Sponge on FH and O7P on BH (which is Cho’s actual setup), but ended up getting a Viscaria with H3NPB on FH and D80 on BH. Might get the Cho Daeseong setup later when I get money lmaoooo

 

[Migzkulit]

no one 😞
Ok, FZD ALC I ready.
Q968 Nat is prepared. Today thin layer of TT lacquer Joola then a bit sanding in the meantime new DHS h3 Neo got 1st thin layer of Seamoon (sinking all night) today will get a 2nd layer of Seamoon and will go to the blade with new T19.

Old T19 was removed from q968 nat and was refreshed putting thin layer of Falco Long and will go on TB ZLF, the same will do with T05 to refresh it with thin layer of Falco Long and with fresh glue on the blade.

For Q968 Prov I’m still waiting so need to decide whether to give a try Xiom or Victas or just order T19 🤔

Just get T19, you're not gonna find what you're looking for in either of those rubbers.
V20 Extra is like Ventus Extra/Super Ventus.
While O7P is T64.

 

[disaster3]

Just get T19, you're not gonna find what you're looking for in either of those rubbers.
V20 Extra is like Ventus Extra/Super Ventus.
While O7P is T64.

so O7P is like T64? Hmmm I recall t64 very good back in the days when I was using it on my Primo JPN

 

[Migzkulit]

so O7P is like T64? Hmmm I recall t64 very good back in the days when I was using it on my Primo JPN

I wouldn't make the switch since the feeling is very different. The way to use the rubbers are different. I personally dislike Tenergy's and Dignics outside of 09c. Too difficult, too different.