Butterfly Zyre 03

[Frenchyping]

Après trois mois d'utilisation des revêtements Zyre03 et TB ALC, soit des centaines d'heures d'entraînement, ma conclusion est la suivante : excellent revêtement, mais très sensible à l'humidité (comme probablement beaucoup de revêtements non hybrides ou peu collants). Le problème s'aggrave lorsque le taux d'humidité dans notre salle dépasse les 70 %, et de nombreuses balles finissent dans le filet sans que l'on puisse frapper fort ou à plat.
Je suis repassé au Cybershape avec un nouveau Helix XH en coup droit, et j'ai trouvé beaucoup plus facile de jouer dans des conditions de forte humidité car la raquette permet de frapper les balles à plat au moins quand c'est nécessaire.
Et globalement, Helix vous offre un peu plus de contrôle, ce qui facilite l'entretien et le dépannage.

P.-S. : Si votre environnement n'est pas trop humide, Zyre est un bon choix ; sinon, tenez compte de ma conclusion.

i agree

 

[passifid]

Just finished my league season this year:

Pre Zyre 03 I used Dynarz CMD BH and H3 forehand last year and first 6 matches of this season to a average of around 40%

With Z03 I am playing better than ever (I've improved too but no coaching) WR is 61% with Z03 roughly.

works very well for me!

 

[merlin el mago]

Hey guys I'm just curious to know if there are differences of grip between the black & the red rubber because I only tried black 2.5 & 2.7 sponge?

 

[Gozo Zyreruna]

Hey guys I'm just curious to know if there are differences of grip between the black & the red rubber because I only tried black 2.5 & 2.7 sponge?

same-same for me.

My fh 2.7mm is red, bh 2.5mm is black.

 

[merlin el mago]

Thanks Gozo to share your feelings.

 

[Oliverpool]

Hey guys I'm just curious to know if there are differences of grip between the black & the red rubber because I only tried black 2.5 & 2.7 sponge?

I have 2.5mm both red and black and the grip feels
Similar to me

 

[merlin el mago]

Thanks Oliverpool.

 

[Yurifi]

how hard it is to engage the sponge with the 2.7 version of Zyre?

 

[merlin el mago]

44º BTY degrees

 

[Yurifi]

this I know. but in practical play, how difficult it is to engage the sponge. sponge is hard and really "fat" ... the point is to engage the sponge, otherwise you are not extracting full potential of the rubber ...

this is why I am reluctant - I am playing Dignics09c and only extract full potential when playing really full power and rubber reacts completely different to i.e. easy play or when I am playing against opponents that are not on my level (yet).

 

[Coolsta Connor]

How do people find Zyre 2.7mm on backhand, how does the difficulty to use compare to 09c on BH?

 

[merlin el mago]

Are different rubbers D09C is sticky and Zyre-03 not.

 

[merlin el mago]

this I know. but in practical play, how difficult it is to engage the sponge. sponge is hard and really "fat" ... the point is to engage the sponge, otherwise you are not extracting full potential of the rubber ...

this is why I am reluctant - I am playing Dignics09c and only extract full potential when playing really full power and rubber reacts completely different to i.e. easy play or when I am playing against opponents that are not on my level (yet).

Zyre 03 and D09C share the same hardness so the only difference is D09C is sticky & Zyre 03 not.

 

[Yurifi]

Zyre 03 and D09C share the same hardness so the only difference is D09C is sticky & Zyre 03 not.

and sponge thickness ... 2.1 or 2.5 or 2.7 is quite a difference ...

to engage sponge of 2.1 thickness is much easier than 2.5 or even 2.7 ...

 

[mamedium]

and sponge thickness ... 2.1 or 2.5 or 2.7 is quite a difference ...

to engage sponge of 2.1 thickness is much easier than 2.5 or even 2.7 ...

are you sure it is easier? can you fully engage H3 42 degrees?

 

[Yurifi]

are you sure it is easier? can you fully engage H3 42 degrees?

how did H3 end up in this conversation? we are talking about Zyre and Dignics, which share same sponge but different thickness.

and yes, I can. not for long, but I can.

 

[merlin el mago]

and sponge thickness ... 2.1 or 2.5 or 2.7 is quite a difference ...

to engage sponge of 2.1 thickness is much easier than 2.5 or even 2.7 ...

If we are speaking of feeling it's "easy" to play with D09C but not to have less sponge because it's topsheet is sticky and also Zyre 03 is way fast speed so "small" dwell time.

Really are different rubbers: one is oriented more to spin & the other to power, speed with a lot of spin. Both needs full stroke. Both are superb rubbers.

The decision to use one or other depends from your skills & consistency, amateur level are not the market for these pro or semi pro rubbers.

 

[Gozo Zyreruna]

ITTF Men & Women Singles World Cup 2006.

Zhao Qihao lost to Patrick Franziska 2-3. Patrick recently changed to Zyre03 from D09C.

Liang Jinkun lost to Ovtcharov 2-3. Ovtcharov also recently changed to Zyre03 from Dignics09C.

In 2008, Tenergy 05 revolutionized the TT sport after the speed glue ban.

In 2025, Zyre03 revolutionizes the TT sport in the 40++ ABS plastic ball era?

is Zyre03 the new Tenergy05?

 

[Julzig]

The Zyre is calling me again like an evil spirit. It lingers in my drawer with its ominous aura wanting to destroy other players hopes and believes.
I must not give in, not yet...

 

[sebi]

Dima and Patrick both have one side 09c one side zyre.
Maybe the combi is the holy grail