Search results

You're welcome! That goes without saying!

You will definitely be satisfied!!!

Do not under any circumstances pour Seamoon directly from the bottle onto the sponge. Always apply a very thin layer so it is even. When the brush is very wet, you cannot spread the layer evenly, there will be more volume in some places and less in others. Three thin layers are optimal for H3.

Butterfly commands prices for sellers!

No, the grip of the rubber would be lost.

Lately the Chinese DHS and 729 manufacturers tend to reduce the stickiness of the rubbers to increase the speed of the rubbers for today's 40+ balls.

You're right, DHS is practically sold out. 21.7.2023 is the expected arrival of the ship with DHS equipment in Hamburg. Stocking should be by August 4, 2023. It was all due to COVID-19, insanely long delivery times of 8 months. In August, there will be something to sell again.

Of course, at DHS you can buy H3 or NH3 hardness 37, 38, 39, 40 and 41°. The difference is in the thicknesses for H3 and NH3. In addition to 2.15 and 2.2 mm, DHS also offers 2.1 mm for the NH3, while only 2.15 and 2.2 mm are available for the H3. Then there are other DHS rubbers, where there are...

These are not definitions, these are bare facts.

It is not true !!!

Yes, around that time. Previously, DHS did not have a consistent hardness, so it listed hardnesses of 38-40 or 41-43. The ITTF didn't allow marking hardness for example 39° for the non-Chinese market because there were big differences in hardness.

It is not true that it is possible to buy different hardnesses of H3 rubbers only in China! We buy all H3 and NH3 hardnesses from DHS.

DHS and 729 are well aware that they are the best sellers, they will never go down on price, the opposite is true!

Not every rubber sponge reacts in the same way. A sponge with large pores responds with very little deflection.

I really don't know, players from the world rankings and the Extraliga buy Seammon from us and there was no problem even though we had it in stock for more than a year. It looks more like a fake, or already bad from the factory.

Battle 3 already tested at 40° hardness. Friendship 729 Battle 3 - https://www.dhs-729.eu/gb/rubbers/174-friendship-729-battle-3.html Better sponge elasticity and higher speed. Explosive power, speed, control and spin complement each other. Lower stickiness compared to regular Battle 2...

Nothing happens with an unopened bottle. Even if it is opened, it will last for one year.

I do not recommend ordering booster and glue at low outside temperatures, it will be destroyed!!!

It is perfectly understandable that the rubber will be bent to the other side. The top sheet is stretched and the sponge has shrunk. Yes, the correct procedure if you want to restart the rubber with a booster, remove the old glue, apply one layer of booster, then put glue again and finally a...

Seamoon is composed of: SECTION 3. Composition / information on ingredients The difference between the single product and mixture: Mixture Substance name Conc. (%) CAS. Natural Rubber 60% 9006-04-6 Ethylenediamine 40% 107-15-3