Search results

I always classified myself as a ""Mediocre-Club-Hack"" but as far as your GF is concerned it shows that she has some class and feel.........and i would love to meet her 😁

I am using Loki Rxton 3 PRO on FH and H3 commercial on the BH . nice and sticky and i don't care about the weight.

Try Rozena

here i am, nearly a hundred years old and have been searching my whole life for the "real thing" when all I ever needed was one of them """" widdle piggies""""

years ago I bought a couple of Yinhe Mercury II. Blue packet with a cream/white sponge. I could not do anything with it at all, the balls had always jumped away from me before i could even attempt to control it

this is easy to answer, there is a best for me a best for you and a best for every other player.

Funny, I was going to say :" there are hundreds of options and combos " 😂

Cheers mate, summing up : "best let it be" 😂

This is interesting, the german boy in the video seems to do pretty well without boosting. He does say that he has to smack it a bit harder but that is as a comparison to the rubber he normally uses.

Fair comment. Of course, if the " 40" in 820 -40 relates to hardness, one would not then classify it as soft right ?

I got my 802-40 boosted and it spins better. Not as good as an inverted sticky chinese rubber but good enough to cause confusions

Test we did proved that when using the same blade and the same rubbers DHS15 on one side and Sueke on the other, the Sueke glue stuck stronger but was the easier to remove. This showed when we started to pull an edge of the glue with the Sueke we could keep on pulling much longer without the...

I tried the revo and the DHS15, they are good glues but the SUEKE is the best.

I let the water dry before I fit the plastic protectors. I use the same rolling stick to apply them as I use to roll on the rubber after gluing them on the blade. Works for me and my rubbers are all sticky and stay sticky.

Explain please. Does organic here stand for plant based rubber as it is gained from the rubber trees drip for drip ? (As in latex) ??)

I totally second this (y)

I have got 4 brand new rubbers for sale. 2 commercial H3 and 2 Neo. Bought them when they were still tacky. Great for experimenting.

Neither do I 😂 😂 😂 😂 😂 😂 I bought the K1 , 5 woods and 2 carbon for an experiment. I applied a very thin layer of fiberglass on one side, I wanted to find out how big a difference this would make by fitting identical rubbers.................:ROFLMAO:

which unfortunately has to be said about many of Loki's rubbers. I still like my Rxton3Pro, after months of club play it is still sticky. I found a blade I had not played with for a very long time and it featured a virtually new Rxton5 (first version) it was also still sticky. So i took it of...

Very good point. Of course nothing will change unless ITTF grows a pair and admits that the wording of the boosting rule is a fuck -up and then go ahead and change it to something like : ""Boosting with solvent-free media is permitted".