Search results

I think he has seen the light and changed his FH rubber to DHS H3 National like all great players 😂😂😂 just take a nice "healthy " drink or 2 and look at the picture again and you can see the blue sponge

this might be true but it never lifts the ball like a sticky H3 😁

I wonder if Tomo changed his FH rubber because he finally starts to hit the table again instead of hitting the air . It is good to see though , I started to feel sorry for him but now he looks solid again.

How many of you use Table Tennis as a vice? No need as long as there is SEX DRUGS and ROCK N ROLL 🤣

Make up a small amount of good epoxy (I use westsystem Z105) about half a thimble. Take 4-5 drops of this mix and thin it carefully with epoxy thinners down to about good quality milk. Take a very small brush, pick up some of the liquid and "feed it" on to the broken edge, letting the fluid...

As the old saying goes : There are many ways to skin a cat. I do not agree with any of the above mentioned ways but may way is quite complicated. You may not be prepared to go through the procedure. it would involve two pieces of 8mm plate glass, 2 pieces of .5mm Mylar sheet Epoxy, NOT out...

WOW. when i pressed the link to Ali i can buy it for NZ$86.27 49% off

whatever Loki is clear about , surprises even Loki 😫

Nothing that happens between consenting adults is inappropriate 🤣

You will have to be clever and play it on a "individual bases". Some you "fist-pump" , some you shake hands. Some you hug and kiss and some you just walk away. 😂

love it, I could actually think of even more nasty radical tool/machines. Indeed we were never told to which part damage is to be avoided the blade or the handle parts. This might sound a bit far- fetched but i remember buying a couple of cheap Hueison blades just for the handles and still use...

they are glued on with white wood glue. I use heat gun to heat them up then carefully with a spatula enter the end that is on the blade side. Once i got the spatula under the handle a tiny bit I apply a little water and let it soak in. then heat again- wriggle the spatula slowly deeper towards...

I get them extra big so i can wear two pairs of socks in them , me and Timo, we know 😂 😂 😂

you can not expect to change from Rozena to H3 without making adaptations to you techniques. Once you have learned to useH3 properly then power and speed will be there. slap on a H3 39/2.1 and be happy, or maybe a Rxton 5

NOOOoooooooo

When i were little I used to have the blister problem in my skiboots. The fix then was to wear a pair of cotton socks with a pair of thick wool sock over them. The cotton sock soaked the sweat away from the feet and any friction was happening between the 2 pairs of socks not between socks and...

While i can comprehend your mathematical way of thinking I can assure you that your theory is complete bollocks. :ROFLMAO: 🤣🤣

Thanks for posting the video.

A good hobby shop can sell you thin sheets of brass. You can cut a strip off with scissors, carefully lift the rubber and shove the strip under the rubber. Then you can just take a scalpel or a sharp new blade in a box cutter and cut the rubber off using a straight edge.Th brass will prevent the...

In football matches when players argue with a ref they get yellow and if they can't take that they go for an early shower. I hope you get at least some grilled sausages with the two beers. 😁 Jokes aside, in our sport , at least when the Pros are concerned , the refs should be Pros as well...