Search results

For me the d09c feels harder and isnt as easy to engage. The arc feels longer and lower and I have to hit perfectly every time. With the K3 cosistency is great and no matter what the ball lands somehow. The rubber doesnt seem to change the trajectory suddenly but more smoothly. With the d09c...

Thats exactly what I fell about K3 but didnt buy it again because its so expensive. Didnt like D09c at all- by far not as easy to engage and play with compared to K3...

Nothing happened to my LAC. But the 2nd layer was really thin, maybe you have used too much booster?

I played LAC unboosted, than with a layer haifu and didnt really notice a difference. Than I put on a very thin 2nd layer and it feels just right. Way better for me than Jupiter 3 as its arc is higher and shorter. Very nice and ill keep playing it from time to time...

Rhyzen is cheaper and just the same. But you need to know they are heavy! Still searching for a setuo to play rhyzen zgx. Have been trying different bh rubbers so safe weight, even built a new blade with 2x 1mm balsa layers. You have to safe up to 10g...

Well it works- pay for your personal trainer and you will see ...

I feel like the c1 is easier to play with than the rozena, at least on backhand. The rozena is bouncier and the c1 is more linear which makes it easier to control for me.

Normal Nittaku h3 neo from tt11- not tacky at all (red)

33 Something like the Innerforce ALC.S but in a cybershapy form and a little lighter than most ALC.S. I didn´t intend to copy the ALC.S but was searching for a composition to use the 2,2mm Abachi sheets I got. For some thickness and weight reasons I decided to take spruce as a middle layer and...

32 Inspired by the tenaly thread I decided to give it a try and made my own Tenashape. I tried it for a little tounament without training and got connected immediately. Black Limba-Zirbe-Basalt-Kiri-Okume-93CF-Coihue 5,8mm, 1250Hz, 87g

30 (+31) This is Nr. 30, Nr. 31 is the same but no cybershape and I didnt finish the handle yet. Cedar-Yew-Zirbe-Yew-Zirbe-Yew-Cedar, so the composition is pure coniferous wood. 4,6mm, 900Hz, 90g (light handle) It is slow on slow strokes but due to the weight it has some hidden power. Played...

29 Lati-Zirbe-Abachi-Zirbe-Abachi-Zirbe-Lati 5,5mm, something like 1200Hz, 90g Lati (also called white wenge) is heavy, hard and stiff. I love the look of this wood. The handle is upcycled from an old garden table (Teak) from which the metal frame broke. Signs of weathering got deep into the...

27+28 Another very special blade and I just love it! Yew-Yew-Kiri-Zirbe-Yew 5,3mm, 1008Hz, 89,5g I did not sand the handle but carved it with an opinel knife from thuja. The handle is uneven and extremely safe this way even without grip tape. Looks ancient in some ways and perfectly fits to...

And here is 25+26 Plum-93g Carbonfiber-Zirbe-Kiri-Basalt-Zirbe-Black Limba 5,,8mm, 1200Hz, 88g Not that stiff and fast as I expected but I only gave it a short try and have to play it a few more times.

Maybe I am too old to find that buttom to open a dispute😬

24 Eucalyptus-Kiri-93g Carbon-Abachi 5,4mm, something like 1250Hz as far as I remember, 87g This is really special. The smoked Eucalyptus is one of the hardest woods I cut and sanded (and heavy to) so there is no need for fibers on that side. Alls veneers are parallel so I added carbon on the...

22+23 Palisander-Basalt-Zirbe-Basalt-Kiri-Anegre-Anegre 5,25mm, didnt record frequencies, 83g I mounted the plies in the wrong direction by accident^^ Though its only ALL the blade has a catapult which is too procounced for my taste and combinded with a high arc I overshot many balls so its...

21+21.1 (was confused when numbering my blades ^^) Purple heart-Basalt-Anegre-Kiri-Basalt-Anegre-Zirbe 5,3mm, 1250Hz, 85g I wanted to try something with the hardest and softest wood I have. To be honest- there is only a very slight difference between the two sides.

19+20 Oak-Basalt-Anegre-Kiri-Basalt-Zirbe-Limba 4,95mm, larger head 160x162mm, 88,5g, 980Hz It was too slow for me, but there was a guy who wanted to buy them and he is very happy

17+18 Limba-Abachi-Kiri-Poplar-Kiri-Abachi-Limba 5,4mm, 84g, 1230Hz- very large handle Good allround blade, nothing special (wanted to try ready plywood of kiri-poplar-kiri which is available over here very cheap)