Search results

This one has the same structure and about the same thickness as the blade from two posts ago, however it uses a thicker outer ply and thinner core. This gives it less speed, more control, more feedback, and a higher top spin arc than the other one, making it perfect for an allround top spin...

Wow, you're so desperate for validation that you simply ignore what other people write. It's like talking to a wall. OK, you are right Tony Stark, I'm out. Sent from my MAR-LX1A using Tapatalk

Finally, Thank you! Bounce tests won't cut it either unless you can shoot balls at the blade at various speeds. We are dealing with an orthotropic material, so the deformation curve isn't linear. This means that different initial drop heights will produce different bounces depending on the type...

The mode we measure when we do the ball bounce is the 6th, the first and fundamental mode is usually around 100hz for a commom blade, so it will take a lot to get a fundamental of 5k Hz. But it seems that the point is still not clear. We are not using frequency to estimate speed. We are using...

Anyone like fish? Awesome fish-scale pattern on these Ako top plies. Composition: Ako / I-C / Framiré / Kiri / Framiré / I-C / Ako Weight: 79.6g and 79.8g Thickness: ~5.65mm Freq.: 1330 Hz Balance: 2.5cm (low)

Blades 132 and 162 sold.

Updated the first post with some more blades.

No, it's actually the opposite. Don't want to get into equations but simply put stiffness is calculated using the Elastic Modulus and Moment of Inertia. The moment of Inertia is dependent on the inertia of each individual layer and their distance to the central axis. The core is very close to...

Thanks!

The TTgear lab approach is also based on vibration modes, they measure a few modes and compare them to a reference blade to transform those values into indices. The first mode (deflection) is what they call primary primary elasticity index, the 6th mode (membrane) is what they call central...

Another one of my experiments. I had built a similar one that was thicker, that one was fast but also a bit head-heavy so I wanted to make something more controlled and spin oriented. The lower weight and balance point also make it much more comfortable to play. Composition: Fineline /...

The numerical analysis did help me in the beginning to successfully predict the frequency of some blades. But I quickly found that wood properties have a big variation, and that variation will influence how the blade feels, even if the frequency is within the predicted values. So I stopped doing...

Scream all you want, I'm not gonna argue with you. I don't know about you, but I've built and tested hundreds of blades so I know what I'm saying is true. Frequency is an indicator of the blade speed when comparing similar compositions. Simple as that. However flawed it may be, it's still the...

Just a brief explanation to those who are not familiar with the frequency reading: Every object vibrates when subjected to an external excitation, a table tennis racket is no different. Like Zeio pointed out, this excitation produces several modes of vibration, each with its own deformed shape...

Yes, the medial ply matters a lot. It affects hardness, rebound, lateral and torsional stability (sweetspot) and feedback. But in this case there is a much simpler explanation: your premise is wrong. Those compositions are not that similar. The Korbel is a 5 ply blade with a thick medial limba...

PVA won't bond to plastic so it's not appropriate. You can try superglue or contact glue, the kind made specifically for plastics. Sent from my MAR-LX1A using Tapatalk

The owner of this combi blade was so happy with the first one that he wanted a spare, apparently this one came out even better than the first. Any resemblance to Mima Ito's blade is merely a coincidence :D Composition: Koto / A-C / Ayous / Kiri / Ayous / A-C / Ash Weight: 81.8g Thickness...

I never removed those, just polished them in the end. The handle was just given a very light sanding with a fine grit sandpaper.

Thanks! I removed the handle pieces using a heat gun and thin knife, same way I normally do. In this case it was relatively easy because the glue was soft. I just glued them back using ordinary wood glue (PVA).

Looking forward to this :)