glue

Hey guys! I was wondering and really want to know how I can clean my glue paddle protection sheet because it has dust on it. I'm using a Donic Formula sheet. It has one adhesive side and it's glue so it's really good for picking up the dust from your paddle after playing but I don't know how...

I have used boosters: FTL, Kailin. Dandoy Bio. Never used any speed glue. I am asking for a friend (and my own curiosity) the differences between the two , aside from the length and quality of the effect, in terms of if SG will permanently alter the playing characteristics of latest rubbers...

I tried looking answers online but no luck. This is gonna be my first time glueing my rubbers so I am about to buy a bottle of glue but I have no idea how much I will need. I am gonna glue 4 rubbers as soon as I got the glue then I will probably replace those rubbers every 5 months. Thanks !

Has anyone encountered a situation where your WBG has solidified and become unusable? I bought a TSP Bio Fix Glue back in January 2019 and have stored this glue in a cool temperature (10-20c) for the last 5 months. I decided to open it for the first time today because I finished my current...

IMO - Best Way to Remove WB Glue from the Sponge (Pull/Stretch, do not Peel) I have discovered a better way to remove WB glue from stubborn open cell sponge rubbers (like Rakza 7) At least, I have not seen anyone online removing the glue in this way. First, as do many, I apply enough layers...

Hey TT Comunity, as your experience... how many times at month should we re-glue the rubbers and why ?

Can I re-glue my already cut rubbers? Some parts are detaching and it's kind of annoying, would it be bad if I re-glue it? If I could, how should I do it? I've noticed that they "shrink" (probably because we have to press on the rubber), so how should I do it?

I create this post as I've seen a few discussions on how to glue OX rubber. Glue sheet is ok but a bit more expensive. Here are the steps. 1. Put OX sheet with paper cover down on a cutting board. 2. Tape the edges on the board with Scott tape but leave the one with manufacturer mark out. 3...

I have Donic Vairo Clean glue and I left it inside my drawer and about after a week i found it extremely runny (around a consistency of water) This is my first time buying glue is this normal? Should it be fine to use?

So I assembled my new paddle yesterday. Measured just about everything. Here are the numbers: Blade 89g FH rubber 67 uncut BH rubber 69 uncut So I glued FH rubber 1st. Total paddle weight 139g. Weight of cut off part 20g BH rubber glued on, Total weight 191. Weight of cut off part 21g...

Besides booster effects, what are the advantages of voc glue? Does it come off more easily? I just need a glue thats super easily to remove because im going to boost and reglue factory tuned rubber once a month. Btw im not going to play in any ittf tournaments.

Does anyone have any recommendations for water based glue or are they essentially all the same? Also any recommendations on where to buy them would be appreciated. Thanks

what is the best speed glue to use ? http://www.prott.vip/Product-List.aspx?producttype=65

Hello guys, was just wondering if the butterfly free chack glue will be ok to use on a varnished blade as i have heard that some glues dont work well on varnished blades. Thanks for any replies in advance;):(

This rubber (Yinhe Mars II) came with a pre-applied glue on the sponge, should I remove it before gluing on the blade or not? https://imgur.com/a/AeJZZ

Aloha everyone! So here comes maybe interesting in some way review of my super-customized racket! In short, I decided to make a little experiment when I had some «extra» coin. =) What exactly did I do? I was wondering what will be if you glue the 999 rubber with a «sponge» that's not really...

Hi All, What is the best glue that will work with just about any rubber and will allow to change rubber no problems later on? Is Chack 2 good?

Which rubber makes the sound of quick glue higher today?

Hey, I will glue on new rubbers soon, earlier I used Butterfly Free Chack and Donic Vario Clean. But now I haven't got any glue. Thanks for answers :)