Good blade for penhold short pips hitter

This user has no status.
This user has no status.
Member
May 2021
20
1
25
I just ordered the extreme s with 1.9mm 802 35 hardness and focus 3 snipe I will make a post about what I think of it when it arrives
 
I suggest blade being the Yasaka Ma Lin Extra Offensive, and rpb rubber for starters try esp tensor rubbers, medium thick sponge. Maybe try like me Yasaka Rakza 7 2.0mm, or for the arc Fastarc c-1 or maybe To5fx? Not to sure about the last one. Can’t give suggestions for a rubber type I have never played before, for the short pimps.

Other than the Ma Lin Extra Offensive, you can try an all wood blade. We all know about Liu Guoliang using short pimps on a Stiga Clipperd. You can try 1-ply hinoki cpen, for the feeling and extra control.
 
I suggest blade being the Yasaka Ma Lin Extra Offensive, and rpb rubber for starters try esp tensor rubbers, medium thick sponge. Maybe try like me Yasaka Rakza 7 2.0mm, or for the arc Fastarc c-1 or maybe To5fx? Not to sure about the last one. Can’t give suggestions for a rubber type I have never played before, for the short pimps.

Other than the Ma Lin Extra Offensive, you can try an all wood blade. We all know about Liu Guoliang using short pimps on a Stiga Clipperd. You can try 1-ply hinoki cpen, for the feeling and extra control.
Oh well too late.
 
This user has no status.
Which variant of clipper is best for SP Penhold (with RPB)?
Any other good options that are all-wood?
It’s a bit subjective, and I think depends on the rubbers too.

I tried Clipper CR before, but didn’t really work that well for me.

If we’re talking about allwood blades, I actually prefer 5 ply over 7 ply.
 
says Penholder, setup: Forehand: 802-40 Blade: Sanwei 75...
says Penholder, setup: Forehand: 802-40 Blade: Sanwei 75...
Member
Apr 2025
100
25
126
It’s a bit subjective, and I think depends on the rubbers too.

I tried Clipper CR before, but didn’t really work that well for me.

If we’re talking about allwood blades, I actually prefer 5 ply over 7 ply.
How's the difference between 5-ply and 7-ply all-wood?
And which 5-ply blades did you use?
 
says Penholder, setup: Forehand: 802-40 Blade: Sanwei 75...
says Penholder, setup: Forehand: 802-40 Blade: Sanwei 75...
Member
Apr 2025
100
25
126
I would suggest Xiom Xtreme -S. It is a bit thicker, faster and it has a solid feel (less vibration) when you hit the ball than the Clipper.
I found some, not in penhold, other than Ali.
That one seems pretty solid. I'll look more into it later.
 
This user has no status.
This user has no status.
Member
Jul 2024
38
46
92
Suggestions:


1) Keep an eye on website like this:
https://www.carousell.com.hk/p/1995年绝版收藏-老红双喜08血胶底板-老pf4-08底板-1154089475/

Sometimes vintage DHS 032 or 08 show up. It may be expensive USD$300.
Weight of blade may range from 95g to 106g. Consider yourself lucky if you score one with 95g (and circa 1980).

2) Look for inexpensive 5-ply or 7-ply vintage DHS or Friendship or Goldcup blade on ebay.

Most of them have ST shakehand handles.
Just cut off a small portion of the handle. It will have similar hardness as the coveted 032/08. But it won't have the nice feel of vintage DHS 032/08. The difference is in the glue.

Like this:
https://www.ebay.com/sch/i.html?_nk...md=2&rt=nc&_odkw=Stiga+super+carbon&_osacat=0


3) Ask Sergio of sdcttblades to custom made one for you. Sergio is a master of blade-maker.
 
Top