Help , Boosted H3N cheaper+durable alternative.

[Kazama]

If you need more speed just get a harder sponge 41 degrees and boost harder.

 

[NasiRendang]

If you need more speed just get a harder sponge 41 degrees and boost harderbo

If you need more speed just get a harder sponge 41 degrees and boost harder.

boosting rubber take a lot time.

i choose H3 Neo Provincial BS H40
i gonna apply just 1 thin layer booster and wait for 6 hrs.

does my rubber will have a better speed&spin with just a one layer thin booster?

i think 1 layer will not decrease the lifespan to much.

 

[belllfador]

I don't see a difference in degradation speed between non-boosted H3N BS and slightly boosted non-neo H3 BS. Also, they play very similarly. I am using just one thin layer, Seamoon 2, and one Falco Platinum. Do you consider the red H3N OS? I am using it at 38 degrees, same booster combo. Have more sticky spin and control near the table than the black H3N BS.

 

[dingyibvs]

boosting rubber take a lot time.

i choose H3 Neo Provincial BS H40
i gonna apply just 1 thin layer booster and wait for 6 hrs.

does my rubber will have a better speed&spin with just a one layer thin booster?

i think 1 layer will not decrease the lifespan to much.

If you're training a lot then the limiting factor will be the topsheet as well. If you're sensitive to rubber variations, then you'll feel the topsheet wear out in a month, about the time the boost runs out. If you're not very sensitive, you can reboost with 2 thin layers and use them for another month. So just boost with 2-3 medium layers to start out, as preserving the sponge by boosting less won't give it any more life due to topsheet wear.

By the same criteria the D09c will last you half as long, and since it costs twice as much it means you'd end up paying 4x as much for the same play hours.

 

[Love_TT]

Help , i need an alternative of Boosted H3N rubber.

i practice min 26hrs - max 30hrs/ week

my current setup is
yinhe pro 05 with H3 neo H39 commercial on FH

i like spinny rubber, now i feel i lack of speed.

i decide upgrade my setup to
-FZD ALC
-D09c (FH) (H3N direct competitor)
-Hurricane 3 Neo H37 (BH)

i dont think i can replace d09c every month.

i need something similar, good speed and spin , with a good price and good durability.

cheaper price would be perfect

thankyou 🙏🏻

oot question 🤔,
(how durable fastarc g1)

i think u can try H3 market, H40-41. Harder -> more speed. with 2 layers of seamoon booster, it will last long. about 3-4 month. very cheap.

 

[Wheeljuke]

You could try these models:
1. Yinhe Jupiter 3(10usd): 40-41º, much tackier than H3, but the feel of the ball is slightly worse, super cheap and don't need boosting and can't be.
2. Pinyi Blue TsweiFeng 3rd Gen(20usd): Hard, also tackier than H3, with great feel of the ball(if not better than H3), can't be boosted.
3. SuperKaiser Ninja-300(25usd): 40-41º, less tacky than H3, great feel, need to be boosted for speeds faster than both 1 and 2 and H3.
4. Stiga DNA Dragon Grip(30usd): 55º ESN hardness, much less tacky than H3, slighly worse feel(kinda mushy), much faster than all of them.

I personally like the feel of Dragon Grip on my Viscaria, you could try it out. I suppose you could try something a little bit harder and tackier and compensate the speed lost by hitting the ball harder.