Yinhe Jupiter 3 Asia (40 deg) - FH or BH?

[cockney_niwa]

Question for Chinese rubber experts. I ordered Yinhe Jupiter 3 Asia (40 degree) to try on my training blade, it's still in shipment by Aliexpress. It was meant to be for the forehand side (hence the hardness). But now I started to think that since I am still very much in the process of proper stroke development, I should just stick to the same FH rubber on both setups (DHS H3Neo), as going from commercial H3N to Yinhe J3A would be too much of a difference between the two setups, so counterproductive for development. Am I right in thinking that?

I use Rakes Z on my BH on the other blade, so I am used to hybrid rubber on BH, so I could just use Yinhe J3A on BH, but I am wondering if 40 degree would be too hard for BH? Any thoughts?

Thank you

 

[TensorBackhand]

I think its hard for bh, and its a bit too tacky for bh as well. I would use it on FH

 

[Cpen Donkey]

I know a guy who uses j3 asia 40 degree on backhand. He says its good. But it all depends based on preference.

 

[Doralikesmath]

I use J3 asia 39 deg on the BH side of my Inner 75, and it works with some trade offs. The spin is excellent, but the speed is kinda slow, and you have to be very active with your strokes. I think it could be very good for developing an active BH before moving on to something faster.

 

[Sincerarity]

I've had some quality issues with Jup 3 on Ali. It used be my fav FH rubber but after placing an order for 3 more 39 degree sheets on Ali (same store as before), I noticed they were noticeablely harder and even felt heavier on my v14 Pro. That caused me to find other alternatives and I've now landed on Hurricance 3 Neo.

Great rubber if you are able to get them in the expected hardness

 

[cockney_niwa]

Thanks all. I think I am going to try it on BH in combination with H3N on the FH. I can always flip the racket around to test it on FH too. Fingers crossed I won’t get it even harder than expected (softer would be a nice surprise).

 

[Aung Thuya]

Question for Chinese rubber experts. I ordered Yinhe Jupiter 3 Asia (40 degree) to try on my training blade, it's still in shipment by Aliexpress. It was meant to be for the forehand side (hence the hardness). But now I started to think that since I am still very much in the process of proper stroke development, I should just stick to the same FH rubber on both setups (DHS H3Neo), as going from commercial H3N to Yinhe J3A would be too much of a difference between the two setups, so counterproductive for development. Am I right in thinking that?

I use Rakes Z on my BH on the other blade, so I am used to hybrid rubber on BH, so I could just use Yinhe J3A on BH, but I am wondering if 40 degree would be too hard for BH? Any thoughts?

Thank you

Bro I am using pro01 with fh ju3 h39 ,for me h39 can be used as backhand and I wanna buy h40 or h41 for fh. But still can't decide yet search for pros and cons of 40 and 41 bec my blade is alc and I can effort power but I feel like the rubber h39 can not make deadly shots , spin is good. Is there anyone have experiences of ju3 h40 and h41? Pls sharing experiences

 

[Egon]

Bro I am using pro01 with fh ju3 h39 ,for me h39 can be used as backhand and I wanna buy h40 or h41 for fh. But still can't decide yet search for pros and cons of 40 and 41 bec my blade is alc and I can effort power but I feel like the rubber h39 can not make deadly shots , spin is good. Is there anyone have experiences of ju3 h40 and h41? Pls sharing experiences

I tried the J3 40, and it's not much faster than the J3 39. It does have a great topsheet, but the sponge lacks dynamism.

 

[Aung Thuya]

I tried the J3 40, and it's not much faster than the J3 39. It does have a great topsheet, but the sponge lacks dynamism.

Should I change j3 h41? But other thing that I am afraid is fh topspin against backspin and that's why I'm frustrating.

 

[Egon]

Should I change j3 h41? But other thing that I am afraid is fh topspin against backspin and that's why I'm frustrating.

If with a booster, it should be normal

 

[Aung Thuya]

If with a booster, it should be normal

I don't want to use booster and for me h39 is a bit soft and I hope h41 will suits my playstyle and alc blades anyway thanks 🙏 bro

 

[Egon]

I don't want to use booster and for me h39 is a bit soft and I hope h41 will suits my playstyle and alc blades anyway thanks 🙏 bro

It will play great out of the box, since it has a factory booster, but after 2-3 weeks, the performance will drop by 1.5 times.
If you want to play without a booster, then better the Double Fish Volant Phoenix 1. Hardness 39 feels like 41 for J3.
Great rubber for the low price.

 

[Aung Thuya]

It will play great out of the box, since it has a factory booster, but after 2-3 weeks, the performance will drop by 1.5 times.
If you want to play without a booster, then better the Double Fish Volant Phoenix 1. Hardness 39 feels like 41 for J3.
Great rubber for the low price.

Bro for my fh ju3 Asia h39 is soft and I want more hardness. If I choose DHS h3 commercial which hardness is suitable without booster.