The UpSideDown Method of Sealing Your Blade

[UpSideDownCarl]

I made this video with Der_Echte as camera man and accomplice in comedic actions.

I have heard lots of people ask how to seal a blade. So this is how I do it. And you may see why I do it this way if you watch the video. Think: VERY EASY TO DO!

 

[mlax]

I made this video with Der_Echte as camera man and accomplice in comedic actions.

I have heard lots of people ask how to seal a blade. So this is how I do it. And you may see why I do it this way if you watch the video. Think: VERY EASY TO DO!

Not sure everyone can follow these instructions, plus I think its kind of ridiculous to ask people to buy $400 worth of equipment just for sealing.

 

[Jirrex]

I made this video with Der_Echte as camera man and accomplice in comedic actions.

I have heard lots of people ask how to seal a blade. So this is how I do it. And you may see why I do it this way if you watch the video. Think: VERY EASY TO DO!

Carl, nice and clear instruction video. That's exactly how I do it, I copied your method after all

Only instead of a paper towel, I use a piece of a cotton t-shirt, but that's just details.

 

[ttmonster]

How did you come up with that number my friend ?

Not sure everyone can follow these instructions, plus I think its kind of ridiculous to ask people to buy $400 worth of equipment just for sealing.

 

[shinshiro]

Thanks Carls, I was waiting for this!

 

[Baal]

Dude. Does that shirt mean you are a doper? Like, are you cool, man?

 

[shinshiro]

Carl, is it possible to you to take a clear picture of wipe-on-poly can (front/side/back)?
Here in my country it doesn't sell this exact product, so I will try to find a similar one with similar composition/properties.

Thanks

 

[UpSideDownCarl]

Not sure everyone can follow these instructions, plus I think its kind of ridiculous to ask people to buy $400 worth of equipment just for sealing.

How did you come up with that number my friend ?

Yeah. Interesting. The Wipe-On-Poly costs about $10.00. $9.95 if I remember correctly. Given that I could seal another 300-400 more blades with that can and do a table and a chest of drawers too, perhaps I used $0.03¢ worth on the blade.

Nobody has to seal there blades. And it is so cheap and easy to do that, really, anyone could do it, even without instructions. The Wipe-On-Poly just makes it so simple it is hard to mess up.

And this is also why most TT websites offer FREE blade sealing when you buy a blade from them.

But, to me, it is so easy that I don't see a reason to have someone else do it when I can do it exactly how I want in less than 4 min. With no cleanup. And the whole world able to view the video replay.

All I actually did was put some Wipe-On-Poly on a folded paper towel and rub the wet part of the paper towel onto the wood so that I could see that all surface areas had sealant on them. Easy to see in person but it wouldn't show well on an NSA SpyPhone video.




Sent from The Subterranean Workshop by Telepathy

 

[UpSideDownCarl]

Carl, is it possible to you to take a clear picture of wipe-on-poly can (front/side/back)?
Here in my country it doesn't sell this exact product, so I will try to find a similar one with similar composition/properties.

Thanks

Sure. I can.

But let's see if Jirrex can explain how he made something that is very similar to this Wipe on Poly by mixing a small amount of regular thickness Poly sealant with solvent.

Carl, nice and clear instruction video. That's exactly how I do it, I copied your method after all

Only instead of a paper towel, I use a piece of a cotton t-shirt but, that's just details.

Jirrex, it was you who mixed your own version of Wipe on Poly, right. Can you tell us how you did it?

By the way, shirt or cloth is fine. I used to use something like that. In some way it works better. Because with my method, after the blade dries, I wipe off a few scattered pieces of paper towel lint from the blade.

But, it doesn't make much difference. And, for me this was more simple. So I stopped using cloth and started using paper towel so I could just throw it away when done.

Sent from The Subterranean Workshop by Telepathy

 

[UpSideDownCarl]

Dude. Does that shirt mean you are a doper? Like, are you cool, man?

Der_Echte tells me that is a palm frond. Isn't it?

Isn't that what it is? Looks like one of those to me. [emoji2]

But being a single father to a troublemaker daughter and recovering from the tragedy we are recovering from, I don't have any time to smoke palm fronds.


Sent from The Subterranean Workshop by Telepathy

 

[ttmonster]

And we all thought you were the "Surfer Dude from Santa Cruz"

Der_Echte tells me that is a palm frond. Isn't it?

Isn't that what it is? Looks like one of those to me. [emoji2]

But being a single father to a troublemaker daughter and recovering from the tragedy we are recovering from, I don't have any time to smoke palm fronds.


Sent from The Subterranean Workshop by Telepathy

 

[Jirrex]

Sure. I can.

But let's see if Jirrex can explain how he made something that is very similar to this Wipe on Poly by mixing a small amount of regular thickness Poly sealant with solvent.



Jirrex, it was you who mixed your own version of Wipe on Poly, right. Can you tell us how you did it?

By the way, shirt or cloth is fine. I used to use something like that. In some way it works better. Because with my method, after the blade dries, I wipe off a few scattered pieces of paper towel lint from the blade.

But, it doesn't make much difference. And, for me this was more simple. So I stopped using cloth and started using paper towel so I could just throw it away when done.

Sent from The Subterranean Workshop by Telepathy

Carl, it was me indeed that attempted to make his own Wipe-On Poly.

The thing is that Wipe-On Poly (from Minwax) isn't available in Europe and I didn't succeed to find a similar product from a different brand. After googling a bit, I found out that Minwax Wipe-On Poly was in fact a varnish from Polyurethane resin that had been thinned down with a solvent. So I bought a can of Polyurethane varnish and a bottle of mineral spirits (note that I bought an oil based varnish, not water based) and thinned down the varnish in a 1:1 ratio. With that ratio, you're able to apply a very thin layer and it still contains enough Polyurethane to 'seal' the blade. I did some tests on wood and I also 'sealed' a photo print made with an inkjet printer, which appeared to be waterproof afterwards.

Because I was new to gluing rubbers, I did start over a few times. Removing the rubbers didn't cause any damage (of course this doesn't mean that without sealing it would have been otherwise) and all the glue sticked to the rubber.

@shinshiro

I hope this information is useful to you.

 

[UpSideDownCarl]

Carl, it was me indeed that attempted to make his own Wipe-On Poly.

The thing is that Wipe-On Poly (from Minwax) isn't available in Europe and I didn't succeed to find a similar product from a different brand. After googling a bit, I found out that Minwax Wipe-On Poly was in fact a varnish from Polyurethane resin that had been thinned down with a solvent. So I bought a can of Polyurethane varnish and a bottle of mineral spirits (note that I bought an oil based varnish, not water based) and thinned down the varnish in a 1:1 ratio. With that ratio, you're able to apply a very thin layer and it still contains enough Polyurethane to 'seal' the blade. I did some tests on wood and I also 'sealed' a photo print made with an inkjet printer, which appeared to be waterproof afterwards.

Because I was new to gluing rubbers, I did start over a few times. Removing the rubbers didn't cause any damage (of course this doesn't mean that without sealing it would have been otherwise) and all the glue sticked to the rubber.

@shinshiro

I hope this information is useful to you.

Thanks. Great info Jirrex. Helpful for anyone who is in a region where MinWax Wipe-On-Poly is unavailable.


Sent from The Subterranean Workshop by Telepathy

 

[shinshiro]

Thanks Jirrex!
Wipe-On-Poly from Minwax is water based or oil based? (@Carl, @Jirrex)
I understand nothing about this subject, sorry if it is an obvious question...

 

[Jirrex]

Thanks Jirrex!
Wipe-On-Poly from Minwax is water based or oil based? (@Carl, @Jirrex)
I understand nothing about this subject, sorry if it is an obvious question...

There are two versions of Minwax Wipe-On Poly, water based and oil based. Carl uses the latter.

 

[UpSideDownCarl]

Thanks Jirrex!
Wipe-On-Poly from Minwax is water based or oil based? (@Carl, @Jirrex)
I understand nothing about this subject, sorry if it is an obvious question...

There are two versions of Minwax Wipe-On Poly, water based and oil based. Carl uses the latter.

That is the answer. I like the good old fashioned stuff with the VOCs.

And you can make your own of the VOC version. But, without a lab and the required scientists, I doubt we could figure out how to make the water based stuff. Too complicated.

But a solvent like mineral spirits mixed with a VOC Poly and you can make your own thin Poly to wipe on.

I can't imagine anything being able to make a thinner coat that fully seals the blade surface.


Sent from The Subterranean Workshop by Telepathy

 

[Der_Echte]

Dude. Does that shirt mean you are a doper? Like, are you cool, man?

Baal, in some strange way, the Nexy Korea president looked at young palm trees that are bent to the side a little (if you visit California, you will see these) and made his logo from that.

I used to think it was a palm leaf, but the first month I moved to California, I saw such palm trees and saw what he tried to draw.

 

[UpSideDownCarl]

Carl, is it possible to you to take a clear picture of wipe-on-poly can (front/side/back)?
Here in my country it doesn't sell this exact product, so I will try to find a similar one with similar composition/properties.

Thanks

Here you go:

Sent from The Subterranean Workshop by Telepathy

 

[shinshiro]

Here you go: [pics]

Thank you very much Carl!

 

[UpSideDownCarl]

Thank you very much Carl!

Any time. I am glad I remembered to do it. Today was a long day.


Sent from The Subterranean Workshop by Telepathy