Greetings from a SANWEI Official

[Andrea Jiang]

Is it possible for you to measure the center of gravity on sanwei froster PBO? If you lay it on the edge of table without rubbers, how far can it go out while still balancing? (cm from handle) Is the headsize 150x157 or more?

We used some special techniques to make the Froster Pbo
The center of gravity of the Froster Pbo becomes closer to the hand, but we can't give you a definite value. The storage time of the wood and the moisture content, which is uncontrollable. But we can guarantee that under the same variable premise, the center of gravity of the Froster Pbo is closer to hand.

 

[Andrea Jiang]

blocking style and attacking top spin
because my forehand loop is still very slow, not strong yet

Try Fextra one my friend, you will like it. Blocking is a good skill for Fextra one.

 

[Andrea Jiang]

Is Sanwei Target Provincial available in H41, or are there any plans to make it available? Thanks.

Sorry, I think you want to say hardness 41? For now we don't have this plan.🤔

 

[Andrea Jiang]

Is it possible for you to measure the center of gravity on sanwei froster PBO? If you lay it on the edge of table without rubbers, how far can it go out while still balancing? (cm from handle) Is the headsize 150x157 or more

Maybe it could help you. We made a gracity test for EX-C Froster PBO.

 

[[email protected]]

Try Fextra one my friend, you will like it. Blocking is a good skill for Fextra one.

thank's
on the recommendation.

 

[Andrea Jiang]

thank's
on the recommendation.

You are welcome.

 

[thomas.pong]

Hi Andrea, great to have your here!

I've always been interested in Sanwei products but it was hard finding information.

What is the full composition and thickness of the following blades:

EX-C Froster PBO
EX-C Froster
EX-C Paramid
Fextra One
Fextra Allround
V5 Pro
CS
Accumulator S
Accumulator J
Accumulator C
A9
C&C
F1 Classic
F3 Classic
F3 Pro
HC-5S
HC-1S
LD Light
Defense Alpha

 

[Andrea Jiang]

Hi Andrea, great to have your here!

I've always been interested in Sanwei products but it was hard finding information.

What is the full composition and thickness of the following blades:

EX-C Froster PBO
EX-C Froster
EX-C Paramid
Fextra One
Fextra Allround
V5 Pro
CS
Accumulator S
Accumulator J
Accumulator C
A9
C&C
F1 Classic
F3 Classic
F3 Pro
HC-5S
HC-1S
LD Light
Defense Alpha

Hello Thomas,

Glad to hear you are interested in our product. In fact, we've been posting this information piecemeal on our tw, fb and ins.
Please follow us on these platforms.

EX-C Froster PBO 6.0 mm +/-0.1 mm
EX-C Froster 6.0 mm +/-0.1 mm
EX-C Paramid 5.5 mm +/-0.3 mm
Fextra One 6.0 mm +/-0.3 mm
Fextra Allround 6.0 mm +/-0.3 mm
V5 Pro 6.2 mm +/-0.3 mm
CS 6.2 mm +/-0.3 mm
Accumulator S 6.0 mm +/-0.3 mm
Accumulator J 7.0 mm +/-0.3 mm
Accumulator C 7.0 mm +/-0.3 mm
A9 6.0 mm +/-0.3 mm
C&C 6.5 mm +/-0.3 mm
F1 Classic 6.2 mm +/-0.3 mm
F3 Classic 6.2 mm +/-0.3 mm
F3 Pro 5.5 mm +/-0.3 mm
HC-5S 6.0 mm +/-0.3 mm
HC-1S 6.0 mm +/-0.3 mm
LD Light 8.5 mm +/-0.3 mm
Defense Alpha 6.0 mm +/-0.3 mm

 

[thomas.pong]

Hello Thomas,

Glad to hear you are interested in our product. In fact, we've been posting this information piecemeal on our tw, fb and ins.
Please follow us on these platforms.

EX-C Froster PBO 6.0 mm +/-0.1 mm
EX-C Froster 6.0 mm +/-0.1 mm
EX-C Paramid 5.5 mm +/-0.3 mm
Fextra One 6.0 mm +/-0.3 mm
Fextra Allround 6.0 mm +/-0.3 mm
V5 Pro 6.2 mm +/-0.3 mm
CS 6.2 mm +/-0.3 mm
Accumulator S 6.0 mm +/-0.3 mm
Accumulator J 7.0 mm +/-0.3 mm
Accumulator C 7.0 mm +/-0.3 mm
A9 6.0 mm +/-0.3 mm
C&C 6.5 mm +/-0.3 mm
F1 Classic 6.2 mm +/-0.3 mm
F3 Classic 6.2 mm +/-0.3 mm
F3 Pro 5.5 mm +/-0.3 mm
HC-5S 6.0 mm +/-0.3 mm
HC-1S 6.0 mm +/-0.3 mm
LD Light 8.5 mm +/-0.3 mm
Defense Alpha 6.0 mm +/-0.3 mm

Thank you very much for this Andrea!

This is useful. I personally can't by a blade without knowing its thickness first.

Can you also share the composition for each of these blades?

 

[[email protected]]

Thank you very much for this Andrea!

This is useful. I personally can't by a blade without knowing its thickness first.

Can you also share the composition for each of these blades?

Just asking
how thicker will it taste?
even if it gets thinner how does it feel?
where is the effect?

i need to know for my knowledge, because i am new to table tennis.

 

[thomas.pong]

Just asking
how thicker will it taste?
even if it gets thinner how does it feel?
where is the effect?

i need to know for my knowledge, because i am new to table tennis.

For me personally, most blades that are thicker than 5.8mm feel too hard, I like to feel the ball and a blade 5.7mm or thinner usually has more feel and is more flexible. I also tend to favor a limba top ply (softer) then koto (harder).

 

[Andrea Jiang]

Thank you very much for this Andrea!

This is useful. I personally can't by a blade without knowing its thickness first.

Can you also share the composition for each of these blades?

Hello, my friend. These are the structures of our popular products.

EX-C Froster PBO Koto-pbo fiber- ayous- kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Arylate carbon - Ayous core
Fextra One Limba-limba-ayous- ayous core
Fextra Allround Limba-Meranti-kiri core
Accumulator S Array- basswood-kiri core
Accumulator J Koto- spruce- kiri core
Accumulator C Ayous- basswood- light carbon- kiri core
C&C Limba- basswood- LD carbon- kiri core

 

[thomas.pong]

Hello, my friend. These are the structures of our popular products.

EX-C Froster PBO Koto-pbo fiber- ayous- kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Arylate carbon - Ayous core
Fextra One Limba-limba-ayous- ayous core
Fextra Allround Limba-Meranti-kiri core
Accumulator S Array- basswood-kiri core
Accumulator J Koto- spruce- kiri core
Accumulator C Ayous- basswood- light carbon- kiri core
C&C Limba- basswood- LD carbon- kiri core

That's great, thank you Andrea!

 

[[email protected]]

Halo temanku. Ini adalah struktur produk populer kami.

EX-C Froster PBO Koto-pbo fiber- ayous-kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Karbon Arylate - inti Ayous
Inti Fextra One Limba-limba-ayous-ayous
Inti Fextra Allround Limba-Meranti-kiri
Accumulator S Array- inti basswood-kiri
Akumulator J Koto- inti cemara-kiri
Akumulator C Ayous- basswood- karbon ringan- inti kiri
C&C Limba- basswood- LD karbon- inti kiri

nice fast and spinning.
which blades?

 

[Andrea Jiang]

That's great, thank you Andrea!

You are welcome.

 

[Andrea Jiang]

nice fast and spinning.
which blades?

If the price factor is excluded, it must be EX-C Froster and EX-C Froster PBO.

 

[[email protected]]

If the price factor is excluded, it must be EX-C Froster and EX-C Froster PBO.

Ok, thank you
carbon Paramid blade is written aramid, but you said this is Arylate
actually this is ALC carbon, aramid or ZLC?

 

[thomas.pong]

Arylate is the same as Aramid so to speak, they are the A in ALC, the C is carbon of course.

So the EX-C Paramid blade is an ALC inner as SANWEI said.

 

[maxposa]

Hello, my friend. These are the structures of our popular products.

EX-C Froster PBO Koto-pbo fiber- ayous- kiri core
EX-C Froster Koto-Arylate carbon- ayous- kiri core
EX-C Paramid Ayous-spruce- Arylate carbon - Ayous core
Fextra One Limba-limba-ayous- ayous core
Fextra Allround Limba-Meranti-kiri core
Accumulator S Array- basswood-kiri core
Accumulator J Koto- spruce- kiri core
Accumulator C Ayous- basswood- light carbon- kiri core
C&C Limba- basswood- LD carbon- kiri core

Thank you Andrea,
as a satisfied user of the C&C blade, I am now happy to know the composition of all layers!!

 

[ck1407]

Hi Andrea,

Can you share with us the trusted distributors for Sanwei products in Asia?

I am interested in trying gear hyper but I can't seem to find an online shop in Asia that sells it