glue soaks into the blade fast

[anas]

hello , i bought butterfly petr korbel blade and joola x glue (first coustom racket) . when i glued the blade , it fells that the glue disapear or soaks fast , not like the videos where it takes time to the white glue color to disapear . is it normal . can you chick if this petr korbel is orginal or fake , just to make sure .

another thing , is it ok if i putted the rubber on the blade a little to early before it dry? . i pressed the racket for like 24h with books after i assembled it

 

[ander999]

Blade is real. I suggest trying different glue, such as Butterfly Freechack I or II. I absolutely hate the Joola X Glue. For whatever reason, it makes the rubber feel dead and have 0 feeling. I've tried numerous bottles and all were a waste of time and money. I suspect it might be the same issue here.

 

[lodro]

it fells that the glue disapear or soaks fasth

what temperature have you got where you live ?
I find once the temp. is over about 25 degrees , the glue turns clear very quick.
It does not soak in it just dries fast.

 

[SlowPower]

When the blade isnt sealed the glue ist dry very soon.
If you lacquer the blade the glue will take more time to dry as the surface cant take much of the water which is in the glue...

 

[igorponger]

No fear. Put more glue layers, it shall work without fail. 👌

 

[anas]

what temperature have you got where you live ?
I find once the temp. is over about 25 degrees , the glue turns clear very quick.
It does not soak in it just dries fast.

31 degress , something like that

 

[lodro]

31 degress , something like that

at this temperature I would expect my glue to loose the white color within 5 to 10 minutes. The glue on the rubbers always take longer than on the blade.