Search results

I once again could be wrong but it could be due to tinyt differences in weight or like qc (although butterfly's qc is quite good) or maybe micro differences as there are going to be differences in two blades that are exactly the same e.g. tb alc comapred to another tb alc wont feel the same

I believe it is koto but i could be wrong. you might have to contact butterfly directly to find out.

Perhaps instead of water, you could consider getting a dedicated racket cleaner. and yes you should consider also getting a protector for your backhand. non-adhesive sheets also stick to non-tacky (grippy) rubbers. you could also consider an adhesive sheet but maybe not for tacky rubbers.

I just want t omake it right so i dont ruin 2 rubbers =) but also if i decide to reglue it do i have to remove the glue layer on the blade as well and redo that one?

Haifu Seamoon booster i believe. is two thin layers on fh and 1 thin layer backhand wkth 2 layers of glue both rubbers ok? also do i keep the plastic topsheet protector on? i believe people already answered this but there were a lot of mixed opinions.

BNut after applying the two glue layers do i need to like apply glue again after applying booster? how many layesr of booster do you rec0mmend for 39˚ and 37˚ then? is my initla 2 layers thinly on fh and 1 thin layer bh application to this case?

wait also one more thing, after all iv e heard, should i still do 2 thin layers on forehand and 1 thin layer on backhand or should i do a bit thicker? If i want a setup thats just as fast maybe as dignics 09c but doesnt make it uncontrollable? also when cutting the rubber do i use a knife or...

But the booster still like spreads evenly through the sponge? if so thanks to u and every1 who replied. im gonna boost it when it arrives and maybe post an update

When boosting, should I remove the plastic protector on the topsheet or keep it there? removing the protector on the sponge is quite obvious. But i dont want booster getting on the tacky topsheet. but apparently not taking it off means it wont boost properly?

I haven't tried it myself but the DHs Wang Hao 5ply all wood blade could be a consideration. Korbel also isn't bad but if you want something like the korbel but a bit faster, you could consider the korbel sk7 as well.

Like you could just peel the glue off? Also is it fine if i just like boost it to the point where the forehand rubber domes like halfway (not super domed) and the backhand rubber slightly domed? Also its also my first ime glueing.

If i decice that I want to reboost my rubbers do i have to somehow get rid of the glue layer and then boost it or is it fine to boost with the glue layer there and then do i have to reapply glue.

Thanks. But what determines like thick or thin or medium layer? Like imn assuming thin = waiting for most ofhte booster to drop fromthe brush, medium = waityinf for half to drop, and thick is like as ssona s yout ake it out, dont wait for any to drip off?z Edit: after reading every1's...

You can always try sanding edges of the blade to make it less heavy. Especially fi you feel the grip of the blade, where you touch the edges, if they're a bit sharp, sand tht. It won't be a massive difference but its a place to start.

Apparently the DHS h301z (or any blade in the 301 line) is prone to splintering. I didnt get seal. So is there any diifference in how many layers of glue i put, as in whether it will make ti less prone to splinteirng? Apparently more glue = better adhesion = less chance of splinteirng whe nyou...

Do you think 1 layer booster on hurriucane 3 soft is go9ign to make it too soft? At 37˚ hardness? I was thinkling just a tiny bit domed would be good enough, Liek maybe boost until dignics 09c speed? or just fast enough so that it isnt dead.

Also its my first time boosting

Hi I'm going to pair the mentioned rubbers on the DHS h301z blade and I don't know how many layers of booster is required. I was thinking 2 thin layers of booster on forehand and 1 thin layer backhnad all with 2 layers of glue. Except the blade. blade is still one layer of glue. any comment?

Hi I'm in australia and found wttc.com.au and apparently they sell the DHS h301z + hurricane rubbers. I just wanted top know if their products were authentic. ALso on a side note, is the h301z relatively easy to use? as in like loops gonna require a lot of effort. Thanks

Ah ok. thanks. my bh rubber is quite clear to me. d80 since my backhand isnt that strong. strong as in like power not technique-wise. i dont like have a lot of strength to play bh. my fh is more powerful. so im just. looking for something that can accomodate for my swing speed. and like not...