Andro Synteliac

[kindof99]

Make sure to seal these blades. The top wood is so dry that it is easy to splinter. My VCI splintered after the first rubber change.

 

[Airoc]

Considering that the VCO is similar in contruction to the FZD how it is possible that the feeling of the blade is better compared to the CO?

I would assume the overall composition supports this impression.
The VCO is thinner and the fibre used is also different.
And of course no two blades are the same, so maybe my VCO was exceptionally good or maybe the FZD you played was uncharacteristically stiff.

 

[po-stit]

I would assume the overall composition supports this impression.
The VCO is thinner and the fibre used is also different.
And of course no two blades are the same, so maybe my VCO was exceptionally good or maybe the FZD you played was uncharacteristically stiff.

I meant versus the Treiber CO but you mentioned something important that i was not considering. The thickness of the blade also plays a part in its rigidity and overall feeling.
At first what you said that didnt make sense to me regarding the feeling of the VCO vs the Treiber CO. To be honest im curious about the VCO

 

[Airoc]

I meant versus the Treiber CO

Yes, I know and was referring to that. It´s just that you mentioned an FZD that you didn´t like and were making conclusions to the VCO because of the similarities in construction. So if your FZD was a rather stiff one it could be built similar to the VCO, but would play differently.

Anyway, the VCO is surely worth a try.

 

[Table10Ice]

Has somebody compared the Synteliac VCI to Xiom ANJ TMXi and/or Tibhar Zodiac Libra ZAC?

I'm thinking of getting two of these, preferably two that is different to each other. Which two should I choose?

 

[neon]

Hi, wich type of inerforce is these blades? For example long 5, AJH TMXi Pro, Hina Hayata, 36.5i and more are with fibre closest to core. TMXi is example to second tipe - a litle more step far from core. And felix hypper carbon, Hugo TMXi have fibre far far away from core. Wich type is andro blades? Let's all understand this. TKS.

 

[neon]

Hi, read in rewiew about Tibhar Libra ZAC and user mentioned that VCI and ZCI has thick core like Hugo TMXi pro. But no sure about it.

 

[neon]

Hello, is there a colleague with the "andro synteliac" blade who can share photos in comparison to other inerforce blades? Many thanks.

 

[pawlott]

I've played with many innerforce ALC type blades. Synteliac VCI is in stiffer category, but have soft feeling. Is more similar to Ovtcharov than Harimoto. More suitable for harder rubbers. With tensor is too fast for me. If you don't like tacky or hybrid rubbers I recommend G1 over Tenergy.

 

[Table10Ice]

Deciding between the Synteliac VCI and Donic Xtreme! Which one is slower and more controlable? Going to pair them with NUZN 48/45 or Donic A3/Z2 on FH and Donic Bluegrip M2 on BH.

Blades I already have are among others:

Xiom HAL 2nd gen
Xiom ANJ TMXi
Tibhar Zodiac Libra ZAC
DHS W968 and Q968
DHS 301Z
Victas ZX-GEAR FIBER

I especially like the two Xiom blades aswell as the DHS 301Z and Victas.