Comparison between Amultart, Jun Mizutani, Viscaria, Garadiya

[Shyam Prabhu]

Hi Can someone help me understand the difference between the 4 blades below?
I'm asking this because I've heard a lot of people comment that you cant really go with the butterfly charts.

Amultart ZL
Jun Mizutani ZLC
Viscaria ZLC
Garadiya ZLC

I have played with Timo ball ALC, Primorac Carbon, Viscaria & Gergely Carbon T5000.It would be great if you can refer/compare to these.

Gergely is my favorite it has the right amount of power with decent control and I really like the soft feel ( maybe because of the hinoki).
Viscaria is my least favorite, it felt too much and difficult to loop/ no dwell time at all. Followed by Schlager Carbon.

Primorac was similar to Gergely a bit more difficult to control and not the same soft feel as Gergely.
TB ALC was great just that it lacked some power and had had a lot of feedback ( not sure if i like it).

Sorry for the Long post
TIA

 

[tomigaya]

Amultart is hinoki + ZLC, and thickness of 6.1mm. MJ ZLC is limba + ZLC + limbą + kiri(not sure). Viscaria is koto + ALC + kiri. Garaydia is hinoki + ZLC + kiri but classic thickness 5.7mm(to be verified). As a consequence, you try to compare very different outer blades. If you don't know, just purchase Viscaria, pair it with Tenergy 05 2.1mm. If you master this setup, then go to Dignics 05 2.1 both sides. If you master this setup, try a harder FH rubber, like D09C or else. If you want to play with smash , pair it with dignics 1.9 in FH and Morito SP 1.2mm on BH, but this is for smashing any incoming ball, not for spin !