This user has no status.
This user has no status.
Post your latest EJ purchase
- Thread starter Tiz
- Start date
This user has no status.
This user has no status.
Active Member
This user has no status.
This user has no status.
🏆 Top 1% Commenter
Well-Known Member
Well-Known Member
I've just been using a thick notepad of paper.It's for my EJing
See
This user has no status.
This user has no status.
Active Member
This user has no status.
This user has no status.
Active Member
Most crazy EJ for me...
Everything should arrive in the next 14 days. Long V is noted 2, because I already have one.
Everything should arrive in the next 14 days. Long V is noted 2, because I already have one.
This user has no status.
This user has no status.
Active Member
Sanwei T5000, with Andro PowerGrip SFX 2.1mm (black, forehand) and Friendship/729 563-1 pips-out (1.5mm, red, backhand), for a very good friend of mine
Last edited:
This user has no status.
This user has no status.
Active Member
Blade is 89gr and 1425Hz.
Bid Dipper 38 for FH and Yinhe Jupiter 3 37º (measured at 43º Shore C) for BH.
Bid Dipper 38 for FH and Yinhe Jupiter 3 37º (measured at 43º Shore C) for BH.
This user has no status.
This user has no status.
🏆 Top 1% Commenter
Well-Known Member
Well-Known Member
Let me know how you like the Stuor Long 5. I had it before, but I felt it was too soft and kinda flimsy feeling.
I absolutely love the CC and Fang Bo B2 though.
This user has no status.
This user has no status.
Active Member
I love it. I already have one since April, my 1st AliExpress purchase for table tennis. It's not that fast, I control it better than the outter carbons, and it suits Arthur China or Big Dipper perfectly. This one is the second one, to test alternate setup (will be with Battle 3 FH and Volant Phoenix 2 BH when I receive them).
This user has no status.
This user has no status.
🏆 Top 1% Commenter
Well-Known Member
Well-Known Member
Can you test it against the Fang Bo B2. I'm curious how similar they are in stiffness and feeling. In my experience, I felt B2 has a very nice balance of flex with snappiness/responsiveness.
Stuor Long 5 felt overly flexy and less responsive.
This user has no status.
This user has no status.
Active Member
Fang Bo B2 and Yinhe 05 have not been shipped yet, so the comparison won't be possible before 10 2 weeks I think. But of course, this was the purpose of part of my EJ, compare the Long V clones.
This user has no status.
This user has no status.
Active Member
Jupiter 3 is not bouncy enough for BH. I find it perfect for FH, but I think it needs to be boosted for my BH for blocks at mid distance. Or maybe QIJI, Volant Phoenix 2, Aurora Max Boosted, Loki GTX boosted, Bloom Power boosted, Moon 12,... would be better suited for the BH? What's your recommandation (I'm pretty sure GTX Pro or Aurora Max).
I played back with my usual setup (Stuor Long V + Arthur China + Gewo Nexxus) and I beat someone around the nº1000 French. Nice tournament. Arthur China forever 😍
I played back with my usual setup (Stuor Long V + Arthur China + Gewo Nexxus) and I beat someone around the nº1000 French. Nice tournament. Arthur China forever 😍
Last edited:
This user has no status.
This user has no status.
🏆 Top 1% Commenter
Well-Known Member
Well-Known Member
Have you read my guide for FH and BH rubbers?
For BH, I would recommend boosted Aurora Max.
This user has no status.
This user has no status.
Active Member
I read them, but you could have changed your mind since. I'll have basically all your recommandations anyway 😅
Here's what's coming along with my blades in my extreme EJ :
I think GoldArc 8 and H3 Neo OS boosted would be worth the try on the BH.
Last edited:
This user has no status.
This user has no status.
Active Member
This user has no status.
This user has no status.
Active Member
This user has no status.
Jupiter 3 requires boosting for sure. In fact, as an extensive Jupiter 2/3 user, I would recommend using 2 layers of Haifu - Jupiter starts getting D09C vibes after that. 1 layer is usually not enough for my liking.
Booster will greatly improve blocking and ease of looping for this rubber.
This user has no status.
This user has no status.
Active Member
Jupiter never needed boosting on my fast blades in FH (because my technique is poor and I can't handle a too fast setup on the FH), that's why I did not boost before using for my BH, but definitely will boost to make another attempt.
Last edited:
This user has no status.
This user has no status.
🏆 Top 1% Commenter
Well-Known Member
Well-Known Member
Similar threads
