says
Table tennis clown
Aliexpress Singles Day Sale 2023
- Thread starter TensorBackhand
- Start date
says
EJ-Victim
I gave up on phone apps, or they gave an approximation, above 1000 only per 100 hz, or didn't keep the max frequency.
I installed this program on my laptop. https://friture.org/ freeware
it finally showed the max frequency. And there is a start and stop button so the reading stays on screen
This user has no status.
Thanks for the insight, tried friture and the frequency is the same, around 1270hz. Maybe I got a bad blade?
says
Table tennis clown
Well-Known Member
About 1300Hz could be correct.
Remember when you buy Stuor, you are buying a decent quality blade but regardless of the name of the blade, regardless of the promised layers of the laminate and any other promises that are being made regarding speed etc. you have to forget about them.
Again, it is like the famous box of chocolate, you never know what you're going to get.😂
For example :
Stuor Sa 7 Layer ALC Carbon Inner Table Tennis Blade Table Tennis Racket Ping Pong Paddles Carbon Fiber Built-in OFF+ ATTACKING.
aliexpress.com/item/1005005936077706.html?spm=a2g0o.detail.1000014.6.7dafHuI1HuI1JQ&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40000.326746.0&scm_id=1007.40000.326746.0&scm-url=1007.40000.326746.0&pvid=cf0f3d27-c88b-4950-addd-6386de02a394&_t=gps-id
cDetailBottomMoreOtherSeller,scm-url:1007.40000.326746.0,pvid:cf0f3d27-c88b-4950-addd-6386de02a394,tpp_buckets:668%232846%238114%23731&pdp_npi=4%40dis!NZD!59.03!55.49!!!35.70!!%402101c71a17020815288918586efb13!12000034924506602!rec!NZ!139609019!
This is supposed to be a non symmetrical blade, hard with a layer of carbon on one side and a softer second side,
And IT IS............. but the choice of veneers is all wrong and one can not feel a difference between the 2 sides when using identical rubbers. Still, it is a well made blade and measuring in at 1600 Hz it sure gives a mighty kick.😂
says
Table tennis clown
Well-Known Member
You still might have a good blade, it just does not fulfill your expectations.
This user has no status.
yeah, its my first carbon blade, and for sure I won't notice the difference
Maybe I just need to glue some rubbers and enjoy the blade...
This user has no status.
This user has no status.
Well-Known Member
I tried bouncing a ball on the blade with the Koto surface. I find that the sound, the bounce height, and the feeling feels very similar to the Sanwei 75 (Koto surface and outer alc).
This user has no status.
Wings appear to be chamfered, I think I’d tidy up the chamfering a bit though.
Enjoy!
This user has no status.
This user has no status.
This user has no status.
Member
I am thinking of using the newly arrived Rxton 9 forehand and lac backhand with my Sanwei 75 outer alc blade. Should I boost my rxton 9 and lac? Or should I glue it directly as it comes?If I need to boost, how many layers should I do?
This user has no status.
This user has no status.
Well-Known Member
Lac is very hard, so if you use on bh, i think booster might soften it up abit and make it easier to use for bh
This user has no status.
This user has no status.
Member
says
Table tennis clown
Well-Known Member
Also very hard but because I do not know your skills I suggest to use both LAC and R9 without boosting and get the feel for the rubbers. If you feel, like i did, that it is not possible to get any kind of feel and speed out of these rubbers unless you whack them real hard, you can always start boosting. I use my R9 now with 2 layers of seamoon btw.
Also, unlike many others, I am not a friend of soft BH rubbers .
I also find that boosting a 41 hardness rubber until one made it into a 37H works with some sponges but not with others. With some sponges one will get them to be softer but they virtually turn into a uncontrollable mush. 🤣
My favorite BH rubbers still are H3 and R5 with just one layer of seamoon. Note, I am talking about the old sticky versions here.
This user has no status.
This user has no status.
Member
LAC doesnt actually feel that hard, especially on a stiff blade.
I am using it on the Stour Lin blade and it feels really good.
It creates a lot of spin with just simple brushing movements and speed is always there when you need it.
Both for FH and BH.
Can recommend to just try it out at first,
I liked it so much that I bought 3 more LACs for a cheap price during the sale.
I play with Rxton 9 boosted with 2 layers, didnt play with it unboosted so far.
With the Lin blade I can understand why Lin yun jus serves can be so effective and his topspins as well.
It looks like a simple movement but the spin creates is very deceptive and the blade gives enough speed from close to the table.
I am using it on the Stour Lin blade and it feels really good.
It creates a lot of spin with just simple brushing movements and speed is always there when you need it.
Both for FH and BH.
Can recommend to just try it out at first,
I liked it so much that I bought 3 more LACs for a cheap price during the sale.
I play with Rxton 9 boosted with 2 layers, didnt play with it unboosted so far.
With the Lin blade I can understand why Lin yun jus serves can be so effective and his topspins as well.
It looks like a simple movement but the spin creates is very deceptive and the blade gives enough speed from close to the table.
This user has no status.
Well-Known Member
I've got about 30 hours on my LAC sheet and no issues so far with it. Looks and feels like-new. So there very well might be a 'good batch' of LAC that doesn't really sufffer from early bubbling issues. Another explanation is that I don't have enough power or the right technique to destroy the thing quickly.
says
Fair Play first
Here is the novelty balls as having been comissioned for the Mixed Teams World Cup 2023. It is for the first time ever that seamless monospherical balls took priority to the two-halves sphere at a major ITTF competition.
No related commentaries by players came up as yet.
A bulck package of 50 pcs at 23c per one is worthy bargain anyway,, as a multi ball assistance this happy bargain pleasing me very much 🏓🏓🏓🏓
Last edited:
This user has no status.
This user has no status.
Well-Known Member
Yeah i would boost the rxton 9 as well. Those chinese tacky rubbers are meant to be boosted.
says
Table tennis clown
Well-Known Member
says
EJ-Victim
says
Table tennis clown
Well-Known Member
Yep, got that , for that price you only get 6 balls.
it is the other brand , not seamless ones , that are cheap.
NZ$3.56
NZ$4.44-20%
Extra 3% off with coins
10/20/50pcs 3 Stars 1 Star Table Tennis Ball ABS D40+ Durable Original Tenis De Mesa Orange White Ping Pong Competition Training
Similar threads
