GAN reviews Rxton 9

[Tony's Table Tennis]

I agree with @TensorBackhand .

LAC could also be used as BH rubber, whereas I struggled with R9 on BH.
I also use LAC without booster.

I loved by Red Rxton9 on FH and BH
I kind of miss it now, that they don't have Reds in production (for me to use on BH side)

 

[Tony's Table Tennis]

It's a really cheap rubber so they probably use a very cheap glue. So if you're a higher level player your going to stress that top sheet much more and the glue just can't hold it together.

other cheap rubbers (cheaper rubbers too) have good glue bond.
Loki I feel is lacking here and I have told them about it.

If they can fix that, the quality on the product would be so much better.

I had a Rxton Pink that was rubber to rubber stuck to one of my other rackets with H3

so pink vs black, when I pulled it apart.... my Rxton only had white sponge left on that racket.
my H3 black became a pink pimple out rubber with some white sponges still.

So, now I was worried, would I damage my H3....
H3 was okay when I slowly removed the pink topsheet that was stuck really tight on....

lesson learned - don't be lazy and actually put my film protector on Loki rubbers. (I had the film in the racket case, just lazy and put racket on top of racket - I did it many times before, but just unlucky that time, I guess)

 

[mattlamperouge]

I loved by Red Rxton9 on FH and BH
I kind of miss it now, that they don't have Reds in production (for me to use on BH side)

Doesnt They have Rxton 9 in red 37deg now? There is stock on different aliexpress sellers and i saw a couple of video reviews.

 

[mattlamperouge]

other cheap rubbers (cheaper rubbers too) have good glue bond.
Loki I feel is lacking here and I have told them about it.

If they can fix that, the quality on the product would be so much better.

I had a Rxton Pink that was rubber to rubber stuck to one of my other rackets with H3

so pink vs black, when I pulled it apart.... my Rxton only had white sponge left on that racket.
my H3 black became a pink pimple out rubber with some white sponges still.

So, now I was worried, would I damage my H3....
H3 was okay when I slowly removed the pink topsheet that was stuck really tight on....

lesson learned - don't be lazy and actually put my film protector on Loki rubbers. (I had the film in the racket case, just lazy and put racket on top of racket - I did it many times before, but just unlucky that time, I guess)

My short experience only had problem with A Couple of Pinks. Really easy to pull apart when testing with scrap cuts. Lac i didnt have the same problem but just tested a few. The others rubbers i didnt felt the bond was weak, Rxton 3 Blue same batch as pink is really strong

 

[Gtsnake]

Yeah, if they can fix the bonding issue it would be one of my favorite rubbers. Very tacky topsheet, hard sponge with good power and good price point.