Post your latest EJ purchase

[Sky Wu]

The last Andro Ligna CI OFF in t11 and the secondary I have currently. Topnotch craftmanship I'v seen.

 

[disaster3]

Really curious about this setup, please tell us something about your impressions

Not really like it... it's good but I think I doubted my abilities too much
My coach told me to get back to FZD with the latest setup as is it was more appropriate for my skills and modern play with 40+ plastic balls. I had a short brake due to Plantar Fasciitis but returned this week for full training mode with my FZD ALC, and felt like fish in the water. Maybe I'm not playing like a pro, but what I wanted to play I did with really quite good consistency.
Today I have 2 training session. One with my coach, 1 hour break and then normal training session in the club. When the opportunity arises, I will try to record something and post it in the appropriate thread for evaluation.

PS. I put it on the sale on PL local board. (Played 2 trainings session so it's almost new).

 

[Fedex78]

TMXi Pro assembled with Rakza Z Max on FH and Vega Europe DF 2.0mm on BH. The blade weighs 85gr.

Frequency: 1248Hz to 1313Hz, but the majority of measurements is between 1270 and 1290Hz. I was expecting way more.

By tomorrow I should be able to try it and post my impressions in an appropriate thread. There are very very few info on this blade across the net, except TTD.

 

[Fedex78]

Not really like it... it's good but I think I doubted my abilities too much
My coach told me to get back to FZD with the latest setup as is it was more appropriate for my skills and modern play with 40+ plastic balls. I had a short brake due to Plantar Fasciitis but returned this week for full training mode with my FZD ALC, and felt like fish in the water. Maybe I'm not playing like a pro, but what I wanted to play I did with really quite good consistency.
Today I have 2 training session. One with my coach, 1 hour break and then normal training session on the club. When the opportunity arises, I will try to record something and post it in the appropriate thread for evaluation.

PS. I put it on the sale on PL local board. (Played 2 trainings session so it's almost new).

Thanks a lot for the detailed answer 👍👍

 

[Wrighty67]

View attachment 27035

TMXi Pro assembled with Rakza Z Max on FH and Vega Europe DF 2.0mm on BH. The blade weighs 85gr.

Frequency: 1248Hz to 1313Hz, but the majority of measurements is between 1270 and 1290Hz. I was expecting way more.

By tomorrow I should be able to try it and post my impressions in an appropriate thread. There are very very few info on this blade across the net, except TTD.

That‘s odd - my TMXI non pro was 1480hz

 

[NextLevel]

 

[Fedex78]

That‘s odd - my TMXI non pro was 1480hz

Right, it's odd. I think I received a defective blade. I tried it, it plays like a slow 5 ply all wood blade, without touch and feeling. I hope TT11 could refund me.

 

[TareqPhoto]

My latest purchase is the following:

1. Nittaku Hammond Z2
2. Yasaka Rakza XX
3. Yasaka Rakza 7 Soft

I saw a nice offer prices of DHS Long 5/5X somewhere and i can't resist so i will order L5X again, i am planning to return back again to Butterfly rubbers after so long time leaving them, because of their prices and bad longevity really, but sounds many players are keep changing and still going back to BTY rubbers mainly Tenergy and often Dignics.

I want to know which glue i should use for sealed [lacquered] blades and non Chinese rubbers or even Chinese rubbers if i get something? i am no longer interested in DHS H3 rubbers, i might keep the one on my current L5X only but all other H3N rubbers i will remove, that is why i bought Rakza XX, and Hammond Z2 i will use it on Stuor Long 5 copy [on FH, and Anti on BH].

In my future plan there is a blade very similar to Butterfly Primorac EX, unfortunately and sadly it is discontinued, and mine was stolen, that has an amazing used H3N rubber that i couldn't find the same at all, this blade has an enormous incredible vibration feeling, even if i put 10mm hard rubbers on both side i still will feel that vibration, i loved it for fun, i played with it for fun regardless i win or lose, so i am trying to find a very similar or even better version alternative to it if you know any, it is a 5 ply all wood, i wouldn't mind 5-7 ply all wood as long it has that vibration in the handle, let me know please.

 

[rbtitco]

View attachment 27065

Nice one, how's she play?

 

[NextLevel]

Nice one, how's she play?

Won't find out until the weekend. Should be a bit slower than what I usually use.

 

[TensorBackhand]

My latest purchase is the following:

1. Nittaku Hammond Z2
2. Yasaka Rakza XX
3. Yasaka Rakza 7 Soft

I saw a nice offer prices of DHS Long 5/5X somewhere and i can't resist so i will order L5X again, i am planning to return back again to Butterfly rubbers after so long time leaving them, because of their prices and bad longevity really, but sounds many players are keep changing and still going back to BTY rubbers mainly Tenergy and often Dignics.

I want to know which glue i should use for sealed [lacquered] blades and non Chinese rubbers or even Chinese rubbers if i get something? i am no longer interested in DHS H3 rubbers, i might keep the one on my current L5X only but all other H3N rubbers i will remove, that is why i bought Rakza XX, and Hammond Z2 i will use it on Stuor Long 5 copy [on FH, and Anti on BH].

In my future plan there is a blade very similar to Butterfly Primorac EX, unfortunately and sadly it is discontinued, and mine was stolen, that has an amazing used H3N rubber that i couldn't find the same at all, this blade has an enormous incredible vibration feeling, even if i put 10mm hard rubbers on both side i still will feel that vibration, i loved it for fun, i played with it for fun regardless i win or lose, so i am trying to find a very similar or even better version alternative to it if you know any, it is a 5 ply all wood, i wouldn't mind 5-7 ply all wood as long it has that vibration in the handle, let me know please.

Let us how know the XX compares with the Z2. I'm very curious.

 

[onipikaju]

My latest blade. Stiga hybrid carbon.

 

[TareqPhoto]

Let us how know the XX compares with the Z2. I'm very curious.

I am not sure which blade to use this R XX with, Hao III or Long 5X as i feel like i shouldn't replace DHS FH yet, i tested it only once from someone else racket, was really good really, i can't judge yet against Z2, but i felt like that Z2 has better control while XX was faster more linear, a bit less spin than Z2, but it is not good judge yet.

 

[lodro]

OK, just got a small windfall and have bought the Rxton9
Total:
NZ$58.88 after discount and incl. postage and taxes, thats US$ 34 or thereabouts.

 

[hclnnkhg]

OK, just got a small windfall and have bought the Rxton9
Total:
NZ$58.88 after discount and incl. postage and taxes, thats US$ 34 or thereabouts.

That's a good deal, domestic price is around 200 CNY so about 27 USD. Did you get it from Aliexpress?

 

[Fnub]

Moon 12 💙 H-

 

[lodro]

That's a good deal, domestic price is around 200 CNY so about 27 USD. Did you get it from Aliexpress?

yes, everything i own and wear comes from Ali 😂

 

[hclnnkhg]

Based on my positive experience with Arthur China and Moon 12 M+, I am planning to fine tune my setup within the Arthur series and Moon 12 hardnesses. Plus these prices are very close to the domestic price (Arthur Asia & Arthur Europe are about 100 CNY = 11 GBP), much better in value IMO than getting Big dipper or Jupiter 3 (I played with both and they are good rubbers), which is almost half the price (50-60 CNY) compare to Arthur Asia in China.

 

[NextLevel]

 

[SlowPower]

Built myself a 7 ply cybershaped blade and bought d09c for the fh.
Also ordered seamon oil to test bloom power boosted.

At least on this blade i can they I dont like the d09c that much after 2 sessions so i hope the bloom power will do the trick (i even like it unboosted).