Where we can find this tutorial please ?
-, 视频播放量 43613、弹幕量 157、点赞数 1479、投硬币枚数 263、收藏人数 1689、转发人数 488, 视频作者 Keikay, 作者简介 人活在過去,相关视频:尹航讲解灌油方法,本人目前使用器材以及刷胶方式的一些情况,灌油和灌胶的区别,【破晓】[乒乓]无机胶水与除胶以及灌油,前国手尹航闲谈器材:狂飙灌油打完撕下来就算废 打三个月撕下来算废 打两天撕下来也算废——尹航抖音2月24日直播,前国手尹航讲解 保养拍子小方法...
www.bilibili.com
He demonstrates boosting in the first part, then gluing. If you don't speak Chinese, the instructions are pretty simple. For boosting, don't use too much/too little, brush up and down. Wait until the first layer dries which is about 1-2 hours, then apply the second layer. Wait a night usually for the second layer to dry, then you can apply the glue.
When gluing it's important not too use too little or it'll start making little balls (dried bits of glue). Also apply in one direction (up and down), you can use the blow drier if needed. He recommends 3 layers on the rubber, 1 on the blade.
He doesn't apply booster or glue to the very edge of the rubber as those parts will be cut away. Later on he mentions that you can spread the glue a bit before brushing it up and down. Also notes that it's important to keep the brush fairly saturated with glue and that it doesn't dry, because that's what causes the little balls to form.