Where we can find this tutorial please ?
-, 视频播放量 62315、弹幕量 207、点赞数 1862、投硬币枚数 336、收藏人数 2178、转发人数 669, 视频作者 Keikay, 作者简介 走一步看一步 蹲得越低跳得越高相信生理學，相关视频：世界冠军粘拍教学 纯干货分享，最伟大的狂飚3灌油全流程（新手），尹航讲解灌油方法，为啥第一遍要刷油？，前国手尹航 谈有机胶水与无机胶水区别——建议狂飙有机版本灌胶neo版本灌油——尹航抖音1月13日直播，超润狂飚灌油教程，国退高手【叶明辉】揭秘最省钱省事的粘拍技巧，湿父讲灌油灌胶！，狂飙怎么刷油才好打，全是细节，张继科 | 0617直播 海绵刷油独家小技巧来也～
www.bilibili.com
He demonstrates boosting in the first part, then gluing. If you don't speak Chinese, the instructions are pretty simple. For boosting, don't use too much/too little, brush up and down. Wait until the first layer dries which is about 1-2 hours, then apply the second layer. Wait a night usually for the second layer to dry, then you can apply the glue.
When gluing it's important not too use too little or it'll start making little balls (dried bits of glue). Also apply in one direction (up and down), you can use the blow drier if needed. He recommends 3 layers on the rubber, 1 on the blade.
He doesn't apply booster or glue to the very edge of the rubber as those parts will be cut away. Later on he mentions that you can spread the glue a bit before brushing it up and down. Also notes that it's important to keep the brush fairly saturated with glue and that it doesn't dry, because that's what causes the little balls to form.
