Aliexpress Singles Day Sale 2023

[TensorBackhand]

Happy EJ-ing 😁
Yours is a bit lighter then mine.
You’ll notice that the build quality is very good. Surface of the blade is very smooth. I guess it’s sealed. I didn’t bother lacquering/sealing it. And when I peeled the rubbers of it came of very easily.

75 is thicker than i thought it would be. Thicker than viscaria, and bigger head as well.

 

[TT Lover]

View attachment 27662

Sanwei 75 arrived

Await for your kindness review and opinions of Sanwei 75 Inner ALC.

Thank you sir.
Best regards,

 

[turbozed]

So I did some measurements and they contradict my experience 🙃 and confirm what you suspect
Weight:
Outer weighs 92,61 grams
Inner weighs 88,12 grams

Frequency:
Outer 1471
Inner 1441

I weighed the rubbers after I ripped them off, and each pair weighed together 96grams

dunno what I must think of it now.

I just weighed and checked the frequency of my Sanwei 75 Inner and it came out to 89 grams and 1442 hz. So it's consistent with yours. Hopefully I have a better time with control on mine. What rubbers were you using? Was it the Gear Hyper on both sides too?

 

[turbozed]

The Sanwei 75 Inner ALC looks very well made and I'm happy with the quality. I've taken a look at plenty of high quality blades during my time in Tokyo at various TT shops and the quality of the wood and finishing is visually on par with blades I've seen from the top expensive brands. My experience with my Sanwei Fextras is that they were slightly more rough around the edges.

 

[riemsesy]

I just weighed and checked the frequency of my Sanwei 75 Inner and it came out to 89 grams and 1442 hz. So it's consistent with yours. Hopefully I have a better time with control on mine. What rubbers were you using? Was it the Gear Hyper on both sides too?

Yes those are the rubbers.
I like these rubbers on my Sanwei Feather Carbon. So because I know these I used them on the 75’s

 

[TensorBackhand]

I setup the Sanwei 75 as a FZD copy setup. I have Victas Triple double on fh, and Rhyzen ZGR boosted on bh.

The blade is quite nice and enjoyable. Its 6.0mm so i thought it might feel bricky, but actually not. It has a similar viscaria feel. It feels light and snappy and crisp. It has a quite bouncy feeling. I also like the sound of hits, light and airy sound.

The speed feels quite high, and as expected its not super dwelly. But again, not bricky. Far less brick than V14 pro.

 

[TT Lover]

The Sanwei 75 Inner ALC looks very well made and I'm happy with the quality. I've taken a look at plenty of high quality blades during my time in Tokyo at various TT shops and the quality of the wood and finishing is visually on par with blades I've seen from the top expensive brands. My experience with my Sanwei Fextras is that they were slightly more rough around the edges.

Please kindly sharing your playing experience of the Sanwei 75 Inner ALC blade.

Thank you sir.
Best regards,

 

[TT Lover]

I setup the Sanwei 75 as a FZD copy setup. I have Victas Triple double on fh, and Rhyzen ZGR boosted on bh.

The blade is quite nice and enjoyable. Its 6.0mm so i thought it might feel bricky, but actually not. It has a similar viscaria feel. It feels light and snappy and crisp. It has a quite bouncy feeling. I also like the sound of hits, light and airy sound.

The speed feels quite high, and as expected its not super dwelly. But again, not bricky. Far less brick than V14 pro.

Does your above setup meaning Sanwei 75 Outer ALC or Sanwei 75 Inner ALC.

Thank you sir.
Best regards,

 

[TensorBackhand]

Does your above setup meaning Sanwei 75 Outer ALC or Sanwei 75 Inner ALC.

Thank you sir.
Best regards,

I was talking about the Outer ALC. I also ordered the inner ALC, but it hasn't arrived yet.

 

[kapahoo]

I've also got an Inner 75. Looks good and the production seems very consistent. Mine is 89-90 grams.
The blade surface is about the same size as Butterfly standard (Viscaria) but the handle is a bit longer and maybe slightly thinner (perhaps like most non-Viscaria butterflies?).
Have some games coming up though so I won't dare trying any new equipment just now...

 

[riemsesy]

I setup the Sanwei 75 as a FZD copy setup. I have Victas Triple double on fh, and Rhyzen ZGR boosted on bh.

The blade is quite nice and enjoyable. Its 6.0mm so i thought it might feel bricky, but actually not. It has a similar viscaria feel. It feels light and snappy and crisp. It has a quite bouncy feeling. I also like the sound of hits, light and airy sound.

The speed feels quite high, and as expected its not super dwelly. But again, not bricky. Far less brick than V14 pro.

you also have a viscaria, if I remembere correctly having read that somewhere?
if so.. what do you think when you compare them both?

 

[TensorBackhand]

you also have a viscaria, if I remembere correctly having read that somewhere?
if so.. what do you think when you compare them both?

I dont have a viscaria. But i borrowed friend's viscaria from time to time. Viscaria is thinner and maybe has more dwell

 

[yepyepcool]

My outer sanwei 75 arrived today.it is 82,7gr and 1632 hz. It surprised me a little, I was expecting between 1400 and 1500. The other ones I use are yinhe pro1 91,7gr and 1421hz, dhs bo b2x 91,3gr and 1356hz. I wonder if Sanwei will be too crispy. I will be able to try it in a few months, then I will give my opinions again.

 

[riemsesy]

mine is 10 grams heavier and frequency of 1441..
very different
good luck with the blade

 

[TensorBackhand]

Very high quality looking box.

 

[Fernando Delfini]

Receive my Stuor FZD today, weight is 87,5g but when I measured the frequency, it gave me only 1250-1290hz, don't know if the app is measuring right but I think it's too low frequency right? never saw a carbon blade with that low reading.

ive used this app - https://apps.apple.com/us/app/audio-spectrum-analyzer-db-rta/id1281873790

 

[lodro]

Very high quality looking box.🤣🤣🤣🤣

 

[riemsesy]

Receive my Stuor FZD today, weight is 87,5g but when I measured the frequency, it gave me only 1250-1290hz, don't know if the app is measuring right but I think it's too low frequency right? never saw a carbon blade with that low reading.

ive used this app - https://apps.apple.com/us/app/audio-spectrum-analyzer-db-rta/id1281873790

I gave up on phone apps, or they gave an approximation, above 1000 only per 100 hz, or didn't keep the max frequency.
I installed this program on my laptop. https://friture.org/ freeware
it finally showed the max frequency. And there is a start and stop button so the reading stays on screen

 

[Fernando Delfini]

I gave up on phone apps, or they gave an approximation, above 1000 only per 100 hz, or didn't keep the max frequency.
I installed this program on my laptop. https://friture.org/ freeware
it finally showed the max frequency. And there is a start and stop button so the reading stays on screen

Thanks for the insight, tried friture and the frequency is the same, around 1270hz. Maybe I got a bad blade?

 

[lodro]

Receive my Stuor FZD today, weight is 87,5g but when I measured the frequency, it gave me only 1250-1290hz, don't know if the app is measuring right but I think it's too low frequency right? never saw a carbon blade with that low reading.

ive used this app - https://apps.apple.com/us/app/audio-spectrum-analyzer-db-rta/id1281873790

About 1300Hz could be correct.
Remember when you buy Stuor, you are buying a decent quality blade but regardless of the name of the blade, regardless of the promised layers of the laminate and any other promises that are being made regarding speed etc. you have to forget about them.
Again, it is like the famous box of chocolate, you never know what you're going to get.😂

For example :

Stuor Sa 7 Layer ALC Carbon Inner Table Tennis Blade Table Tennis Racket Ping Pong Paddles Carbon Fiber Built-in OFF+ ATTACKING.​

aliexpress.com/item/1005005936077706.html?spm=a2g0o.detail.1000014.6.7dafHuI1HuI1JQ&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40000.326746.0&scm_id=1007.40000.326746.0&scm-url=1007.40000.326746.0&pvid=cf0f3d27-c88b-4950-addd-6386de02a394&_t=gps-idcDetailBottomMoreOtherSeller,scm-url:1007.40000.326746.0,pvid:cf0f3d27-c88b-4950-addd-6386de02a394,tpp_buckets:668%232846%238114%23731&pdp_npi=4%40dis!NZD!59.03!55.49!!!35.70!!%402101c71a17020815288918586efb13!12000034924506602!rec!NZ!139609019!​

This is supposed to be a non symmetrical blade, hard with a layer of carbon on one side and a softer second side,
And IT IS............. but the choice of veneers is all wrong and one can not feel a difference between the 2 sides when using identical rubbers. Still, it is a well made blade and measuring in at 1600 Hz it sure gives a mighty kick.😂