Calderano Signs with Joola (#139)

[Matt Hetherington]

@Matt Hetherington if joola produces the blades for hugo at the same factory (korea) as the blades from his former sponsor xiom, why is that the blade from joola cost so much more? 189 for xiom HAL vs 229 for the joola AryX. where does the big 40€ price difference comes from?

The pricing is set based on where the blade fits within our own blade lines, you could ask the same question of many different blades on the market. The US pricing is my domain so where 229 euro would have been 265usd, I set the pricing at 229usd instead.

 

[Matt Hetherington]

Here is Han Ying's husband Lei Yang's take back in 5/2026 on Calderano dumping Xiom for Joola.

https://weibo.com/1750871477/R1ni3o5DO
胖头莎昱_
自主创作
26-5-27 20:06
发布于 北京
来自 微博视频号
[#乒乓球[超话]#] 乒乓球超话#一分钟精选视频扶持计划##微博二创视频创作季#
雷洋：雨果以前签约的是骄猛，后来换成尤拉，因为拿过世界杯男单冠军，在利益面前什么都是浮云，万远爸妈都是中国人，妈妈是北京人老万是湖南人，老万很小就去八一队了 [http://t.cn/AX6Tqh6G] 胖头莎昱_的微博视频
(Lei Yang: Folks still don't get it? Why do you think Hugo jumped ship from Xiom to Joola? In the face of immense profit, nothing else matters...)

People can speculate all they want, and they will, without any information beyond their obvious thoughts and assumptions they have essentially very shallow opinions

 

[TTWiz]

I really do think there’s a difference between the ARY-x and the HAL. Whether the higher price is worth it is up to each person to decide.

First of all, there are objective criteria like head size, overall weight (even with the same blade weight), and balance (head heavy) due to the larger head size and the effects that all of the above bring with them.

I also feel that the HAL comes across as more “muted” compared to the ARY-x. Whether that’s because I’ve been using the blade for a while now (so its properties have changed over time due to sweat, air, scratches, etc.) or because the rubbers are a bit more worn on my HAL setup, I couldn’t say for sure.

I’ve played with it in two training sessions with others from my club, and I’ve already switched permanently to the ARY-x, even though the plan was just to buy it for comparison and to have an alternative when my HAL blades are no longer usable.

I’m taking a session with the robot/Spin Sight this week, where I’ll go through all the different types of strokes to see if there’s a difference in the results (spin/speed).

If I get around to it, I’ll write a proper review at some point. One that focuses mainly on comparing it to the HAL.

 

[zeio]

People can speculate all they want, and they will, without any information beyond their obvious thoughts and assumptions they have essentially very shallow opinions

I've heard that before. Salespeople can deflect all they want and they will...

師出有名.

https://www.tabletennisdaily.com/forum/topics/calderano-signs-with-joola-139.38480/post-558910

In case the following is not enough, I have more right from ESN...

https://www.tabletennisdaily.com/fo...o-need-to-hide-the-name-esn.36802/post-560117

"　We present our technology and rubber specifications, such as "C-touch," "H-touch," and "Tensor," and manufacturers consider the product profile and present the specifications. Based on this, we ask about the target audience of the product, sponge hardness, top sheet geometry (grain shape, density, etc.), surface adhesion, and other parameters (elements) desired, and create a sample. Each manufacturer has their own requests and marketing, so the product will not be the same."

"In response to criticism that the table tennis rubbers supplied by ESN are similar, CEO Persson replied, "The number of rubber combinations is endless. We propose prototype rubbers that meet the characteristics desired/requested by table tennis manufacturers, and after testing, aim to commercialize them." He said that the development of future rubbers that can keep up with the evolution of table tennis is a major driving force behind their research."

https://www.tabletennisdaily.com/forum/topics/masami-without-german-rubbers-table-tennis-manufacturers-and-shops-might-not-have-survived.38742/post-560123

ESN couldn't become "Intel." Table tennis manufacturers didn't want their rubbers to be publicly known as being produced in the same factory. However, users were aware that products sold under the "German rubber" label were "manufactured in the same factory."
ESN also didn't want to remain a "nameless" behind-the-scenes presence, but they likely thought it was unavoidable since their "customers," the table tennis manufacturers, were unwilling.
At the root of this is the long-standing preconception that German rubbers are inferior to Butterfly rubbers."

 

[Matt Hetherington]

I've heard that before. Salespeople can deflect all they want and they will...

Or just maybe I'm telling the truth. Shock horror, the universe might split into oblivion. Here's the simple truth, the only people who know the facts are the people who you don't trust to give responses because they have a vested interest. For that reason you would prefer to believe opinions of people who are 'independent' but who have nothing but pure speculation based on what they think is obvious to them.

I can either comment and respond and be told i'm a deflecting salesperson, or I can not comment - for the benefit of other people in the thread I choose to continue commenting.

 

[andzejgolot]

People can speculate all they want, and they will, without any information beyond their obvious thoughts and assumptions they have essentially very shallow opinions

700k$ yall tripping

 

[Matt Hetherington]

700k$ yall tripping

🤣🤣🤣🤣🤣 that’s just wild

 

[zeio]

Or just maybe I'm telling the truth. Shock horror, the universe might split into oblivion. Here's the simple truth, the only people who know the facts are the people who you don't trust to give responses because they have a vested interest. For that reason you would prefer to believe opinions of people who are 'independent' but who have nothing but pure speculation based on what they think is obvious to them.

I can either comment and respond and be told i'm a deflecting salesperson, or I can not comment - for the benefit of other people in the thread I choose to continue commenting.

Well, even a former table tennis rubber technician in Japan that owns a shop and sells German rubbers do not buy it.

https://www.tabletennisdaily.com/fo...ops-might-not-have-survived.38742/post-560095

-From the perspective of a rubber expert, what do Butterfly rubbers and German rubbers have in common?
"The ball retention of Tamasu rubbers is unique. There are rubbers that are soft and have good ball retention, but when you measure Tamasu rubbers, they are fairly hard, not soft, yet they feel like they have good ball retention. I wonder if it's the balance between the sheet and the sponge.
If you read an article, it says that German rubbers are completely different depending on the manufacturer, but in reality they're not that different. The only thing I feel is that Tibhar is a little different."

 

[Matt Hetherington]

Well, even a former table tennis rubber technician in Japan that owns a shop and sells German rubbers do not buy it.

https://www.tabletennisdaily.com/fo...ops-might-not-have-survived.38742/post-560095

I don’t understand the relevance. What does a japanese rubber technician’s buying preferences have to do with Hugo’s reasons for changing sponsor brands?