Search results

Sory, wrong surch. For kiri core I am finding only this one:

TT blades databace: https://stervinou.net/ttbdb/liste.php

All T-shirts and shorts, made from cheap synthetic materials. All rubbers above 20€ and some of them under. Worst brand is Tibhar.

I can only compare it with STN2 STN1 (blue and yellow package, BS) H3, B3 and B3 purple. The topsheet feels the same as B3 and B3 purple, a bit softer than H3 BS topsheet, closer to red H3 OS. The sponge is similar to H3 BS, but with less density. STN2 is more sticky, oily, and not so spiny...

Broken boundaries black, 40 degrees, 2.2mm, blue sponge. Measured hardness 51 degrees, thickness 2.1mm, weight 48g cut to 161x156mm. The topsheet is semi-tacky, can hold the ball for 1-2s and with similar pips geometry as H3 and B3. The pips orientation is horizontal, same as VS<401. The rubber...

Xiom Stradivarius

My way of My simple explanation is the trampoline effect. If the blade has hard outer layers (with carbon) and a soft core layer, the outer layers can bend more and act like a spring. Ticker and soft core can boost this effect. For example, balsa carbon blades are very bouncy and relatively...

For easy choping In general, the answer is yes. But from my experience, some rubbers are just too fast or jumpy for my chopping level, no matter the blade. For example, Tenergy 05, Omega Tour V and Mantra XH. G1 was good and with 1.7mm sponge is even better on Goriki Danshi. Also, J&H Z52.5...

It is so individual... but: Xiom J&H Z52.5 - best not sticky rubber, H3N BS - best sticky, Pimple Slide + custom hard sponge are the best pips.

I have the same blade and can confirm is relatively slow ALL. The carbon is fake and is not comparable with other carbon blades. Palio Energy 03 has soft ayous top layers that provide dwell time and a good feeling. So, it will be good for your next blade to be with a soft wood top layer - limba...

You have 2 carbon layers with area close to pi × 0.076^2=0.0181m^2, or 2× 240x 0.0181=8.7g weight of the carbon. Going to 90gsm will cut this value to 3.3g, or 5.4g lighter blade. IMO, 90gsm is very thin carbon layer do give you additional speed. Ask @SDC, he uses a lot of types of composite...

Some boosters evaporate, some don't. A drop of haifu white II on a glass surface can evaporate for 2 weeks. Same as baby oil or liquid paraffin. Same as the small oil content in revolution 3 rubber cleaner. Falco platinum doesn't evaporate at room temperature - drop of it remains the same for...

Admiration for the efforts and a good starting point. But I disagree with the pips geometry of G09C - has almost the same topsheet geometry as H3. Same pips density. Also, the same density as LAC and many more rubbers that are trying to compete with H3. Will be good to have some info on...

If the difference in speed is high, you will make more unforced errors. If the difference is small, it will be just not worth the trouble. Best option is to change your game style, less spin, more speed. The second setup could be something for experimentation and feeding EJ demons.

After a year of EJ-ing, I found my type of BH pips - medium or hard sponge >1mm, MP (SDK, Pimple Slide with custom sponge) or hard LP (Ilius B, Sword Venom). Little to non spin reversal, but much more possibility for offense. Pips punches and semi-loops are relatively slow but so difficult to...

Nice video and overall good message. But, IMO, the logic is slightly different. Honoka is not an attacking player that uses pips only to disturb the opponent. She is chopping 95% of the time... Hitomi Sato is more aggressive, but still not like Yuto Maramatso and Ruwen Filus. The last one...

Looking good. Share impressions when you test it.

You mean Razer L8, and yes HC-5S is looking the closest. From the database, HC-1s is a bit faster than HC-5s, 1350 vs 1300Hz. If we look at the frequency/weight ratio, JRE will be even faster. Cheap carbon/alc is not equal to Butterfly level carbon/alc.

I was very close to ordering NUZN 48, but worried about durability. I am playing against people with that rubber. The initial level of spin is very high, and they can consistently lift my chops like with H3, but after 2–3 weeks they can not. Is it possible to prolong the "honey period" to more...

I have HC-6s, 3+2 layers, hinoki out, kiri core. Looks like the second handle from the picture, with a bit thinner top layers. Fast, stiff, very jumpy (trampoline effect), 79g, 1600Hz, with small sweet spot. Makes dead rubbers alive, but for my game brings only better block. It could be a good...