SDC Handmade Blades

[SDC]

Two more Limba blades, this time using red ALC. Actually, the veneer is dark limba, that's why there are some dark spots in the edges.

Blade 24 is a Inner Fiber type composition:

Limba/Limba/ALC/WRC/ALC/Limba/Limba - 93.4g - 5.85mm - 1290Hz



View attachment 19625

Blade 25 is a Michael Maze/ Marcos Freitas type composition:

Limba/ALC/Limba/Kiri/Limba/ALC/Limba - 87.9g - 5.6mm - 1300Hz



View attachment 19634

 

[Simas]

they look awesome. How did you make your logo by the way?

 

[SDC]

they look awesome. How did you make your logo by the way?

Thanks Simas. Those are my initials SDC. I buy a large sheet of plastic and cut the lens to size using the drill press. The logo is just printed on a piece of paper.

 

[yogi_bear]

To be honest, the 3 stripes look like an Adidas handle but then again they are out of production now. Nice blades.

 

[SDC]

To be honest, the 3 stripes look like an Adidas handle but then again they are out of production now. Nice blades.

Ah ah, i was just waiting for anyone to notice. The Adidas Avenger Carbon had one of the most aesthetically pleasing handles in my opinion and some of my handles are based on that. I hope i don't get sued

 

[yogi_bear]

Nah, even Butterfly Sardius has 3 stripes and also some of those Gambler blades.

 

[Magic_M]

your craftsmanship is great! I can tell you improved on the little details from the first one you posted.

It is really great to see, how your skills improved step by step, from blade 1 to blade 24 and 25 now, which both look fantastic in my eyes. Top craftmanship.

 

[SDC]

It is really great to see, how your skills improved step by step, from blade 1 to blade 24 and 25 now, which both look fantastic in my eyes. Top craftmanship.

Thanks Magic_M, I'm trying to improve with every build.

Enviado do meu SM-G531F através do Tapatalk

 

[SDC]

I wanna say thank you to members Magic_M and Shinshiro for trusting in me to build their custom blades. I really hope you are happy with the result.

Blade 26 - This one goes to Magic_M. Straight handle made to his specifications. Very similar to Blade 16 but with Limba outer. The core was enlarged to compensate the softer outer ply and give some power away from the table.

Limba/Beech/3x Kiri/Beech/Limba - 81.7g - 5.85mm - 1205Hz





Blade 27 - This one goes to Shinshiro. It's identical to Blade 23 but with a different wood selection in the handle to keep the weight down.

Limba/Limba/Basalt Fibre/3x Kiri/Basalt Fibre/Limba/Limba - 85.8g - 5.8mm - 1160Hz





View attachment 19749

 

[Simas]

Beautiful

 

[BlueSkies]

In absolute awe. Blade 26 especially caught my eye.
Keep up the good work. Loving it.

 

[SDC]

Beautiful

In absolute awe. Blade 26 especially caught my eye.
Keep up the good work. Loving it.

Thank you

 

[Caxoera]

Awesome work! Really great man!

Gostaria eu de saber trabalhar tão bem com carpintaria.

 

[SDC]

Awesome work! Really great man!

Gostaria eu de saber trabalhar tão bem com carpintaria.

Obrigado Caxoera! Tento melhorar o meu trabalho com cada madeira que faço

 

[UpSideDownCarl]

That has been done. The blades look nice.

 

[SDC]

That has been done. The blades look nice.

Thank you Carl!

 

[lasta]

Hi, is there a thesis behind the 3x kiri cores? How much difference does it make vs a single thicker layer? Is there a specific "feel" you are going for?

Also, (philosophically) how would you approach designing a blade optimized for short pips?

 

[SDC]

Hi, is there a thesis behind the 3x kiri cores? How much difference does it make vs a single thicker layer? Is there a specific "feel" you are going for?

Also, (philosophically) how would you approach designing a blade optimized for short pips?

Well, basically it's a 7 ply blade so the same principles apply. The 7 ply is a softer, less stiff and has a bigger sweet spot. To me it feels almost as an ayous core but not as hollow as a 5 ply. The goal was to make a looping blade that didn't feel too hollow when blocking but still light enough.

I never played with short pips but i'm thinking something like a relatively soft outer layer to grab the ball and a harder medial ply/ inner type composition to get some acceleration on harder strokes.

 

[SDC]

This time something a little different.

This blade belongs to a very old player and it's from 1950! It had cracked before and the person who repaired it left a very ugly stripe on the surface that wasn't even flush with the rest of the blade, so a mark was visible after the rubber was glued. Now it cracked again.

I fixed the new crack and the split isn't even noticeable. While i was at it, i repaired the previous repair. I didn't have any cypress, which is the wood that the blade is made of, but i had some spruce, which is close enough. The result isn't perfect but it's much better in my opinion, and with the rubber glued it's like it never happened.

 

[SDC]

And two more custom blades.

The first one is based based on a classic composition but with a different, and very uncommon, medial ply.

Limba/Ako/Ayous/Ako/Limba - 84.3g - 5.8mm - 1162Hz





View attachment 19844

The second blade has a similar composition but uses Anigre as the medial ply and a thicker core.

Limba/Anigre/Ayous/Anigre/Limba - 84.3g - 5.8mm - 1162Hz





View attachment 19847