SDC Handmade Blades

[SDC]

The goal for this one was to achieve a relatively slow blade but with a solid feeling and a good sweetspot, so we opted for a thin 7 ply with a harder medial ply. The handle is made with Wenge wood.

- Limba / Mahogany / Ayous / Ayous / Ayous / Mahogany / Limba
- 85g
- 5.7mm
- 1120Hz
- Balance: 2.9cm (Low/Med)

 

[SDC]

- Limba / S-AxC / Ayous / Kiri / Ayous / S-AxC / Limba
- 84.1g
- 5.7mm
- 1528Hz
- Balance: 3.1cm (Med)

 

[SDC]

This blade celebrates nothing. It does not have a special meaning as a souvenir and it doesn't inherit any special will. It's just a blade...

By combining the not so rare cedar grip ( that I literally bought at Aldi ), with the common Cypress outer ply, and ALC fiber that everyone knows, I created a light but fast blade, so that you don't tire yourself much.

Available FS.

- Cypress / ALC / Ayous / Kiri / Ayous / ALC / Cypress
- 76.3g
- 6.25mm
- 157x150mm
- FL (101x25-23mm)
- 1485Hz
- Balance: 3.4cm (Med)

 

[SDC]

Just a happy family chilling on the couch, the father, mother, son, and the cousin with the weird hair cut 🙂

This line of blades is a proof that head size affects stiffness, and how we can judge stiffness by looking at the frequency reading. All blades share the same composition, but with a increasing head size, there's a decrease in the frequency reading and stiffness.

- Limba / ALC / Ayous / Kiri / Ayous / ALC / Limba
- Freq.: 1227, 1291, 1380 and 1421Hz

 

[Lazer]

Interesting head shapes...
The decrease in frequency is to be expected, its like a guitar string the shorter the higher frequency at the same tension.

Cheers
L-zr

 

[SDC]

Interesting head shapes...
The decrease in frequency is to be expected, its like a guitar string the shorter the higher frequency at the same tension.

Cheers
L-zr

Exactly

 

[Haraold]

the frequencies are from left to right?
Hey the one with the weird haircut is mostly the coolest Dude in the Family🤓

 

[Haraold]

and Thx for The Stopsign you made for me,like it very much.I also think i have my rubber Setup for the season.Hope you get your Rubber,too.

 

[SDC]

the frequencies are from left to right?
Hey the one with the weird haircut is mostly the coolest Dude in the Family🤓

Yes they are Harald

 

[Haraold]

i take that as a yes,for both sentences

 

[bobpuls]

Just a happy family chilling on the couch, the father, mother, son, and the cousin with the weird hair cut 🙂

This line of blades is a proof that head size affects stiffness, and how we can judge stiffness by looking at the frequency reading. All blades share the same composition, but with a increasing head size, there's a decrease in the frequency reading and stiffness.

- Limba / ALC / Ayous / Kiri / Ayous / ALC / Limba
- Freq.: 1227, 1291, 1380 and 1421Hz

These are ugly as hell... By design of course

 

[SDC]

You send me your design and I make it happen!

- Limba / Mahogany / Balsa / Ayous / Ayous
- 7.7mm
- 72.8g
- 1485Hz
- Balance: 2.4cm (Low)

 

[Haraold]

I think you meant when you can play them?some of them you can play right away.
you can ask @hipnotic what Blade you currently Play and what would suit you best.
Don´t be Shy its not so complicated,you don´t have to have knowledge about Veneers etc,,Sérgio does that for you
Scroll to first page,you will find blades he has for Sale,too.
https://www.tabletennisdaily.com/forum/showthread.php?22708-FS-SDC-Blades

 

[SDC]

- Mansonia / Ayous / Ayous / Ayous / Mansonia
- 84.9g
- 5.7mm
- 1100Hz
- Balance: 2.0cm (very low)

 

[Der_Echte]

Where have I seen such a handle before ???

 

[SDC]

Where have I seen such a handle before ???

I use this wood a lot.

Sent from my MAR-LX1A using Tapatalk

 

[damszelfly]

- Mansonia / Ayous / Ayous / Ayous / Mansonia
- 84.9g
- 5.7mm
- 1100Hz
- Balance: 2.0cm (very low)

Hmm, I have a blade, which is fairly similar to this except one spectacular difference. Plies 2&4 are Koto instead of Ayous (but approx. the same thickness) - this results in a bounce freq. of ~1300Hz instead.

 

[SDC]

Hmm, I have a blade, which is fairly similar to this except one spectacular difference. Plies 2&4 are Koto instead of Ayous (but approx. the same thickness) - this results in a bounce freq. of ~1300Hz instead.

There is not enough information to make such a comparison, there are more variables than that. However, the nature of the medial ply doesn't have a big impact on the frequency, but the thickness does. For this same composition, a thinner medial and a thicker core, would result in a higher frequency.

 

[SDC]

This is "Laziness" little brother, same layers but inner fiber instead of outer. It's heavier, but it also has a much lower center of gravity, which really helps with maneuverability. It will make you work more for it, it's more spin and control focused rather than speed, but it still has a nice kick on those higher gears.

Available FS.

- Cypress / Ayous / ALC / Kiri / ALC / Ayous / Cypress
- 87.1g
- 6.2mm
- 157x150mm
- FL (101x24.5-22.5mm)
- 1380Hz
- 2.6cm (Low)

 

[SDC]

Jean Paul Montanus (NED), using a custom SDC blade, at the side of Kelly Van Zon (NED), became world champion in Mixed Doubles Class XD14 at the Andalucia 2022 World Para Table Tennis Championships!