SDC Handmade Blades

[MartyC]

custom order.

- limba / szlc / limba / kiri / limba / szlc / limba
- 92.2g
- 6.05mm
- 1590hz
- balance: 2.8cm (low)

most beautiful handle ever.

 

[hipnotic]

Khaya, or African Mahogany, is a nice solution for someone who wants something between Limba and Koto in terms of feeling. It's just not very popular on commercial blades because the amount of natural pores, makes it a difficult wood to work with. This blade offers a precise touch and decent speed, with a moderate weight and balance.

Available FS

- Khaya / Ayous / AC-I / Kiri / AC-I / Ayous / Khaya
- 85.2g
- 6.15mm
- 157x150mm
- FL (101x25-23mm)
- 1290Hz
- Balance: 2.9cm (Low)

 

[bobpuls]

Khaya, or African Mahogany, is a nice solution for someone who wants something between Limba and Koto in terms of feeling. It's just not very popular on commercial blades because the amount of natural pores, makes it a difficult wood to work with. This blade offers a precise touch and decent speed, with a moderate weight and balance.

Available FS

- Khaya / Ayous / AC-I / Kiri / AC-I / Ayous / Khaya
- 85.2g
- 6.15mm
- 157x150mm
- FL (101x25-23mm)
- 1290Hz
- Balance: 2.9cm (Low)

African mahogany is the most comin wood with my blades...
But when I'm building a blade for me then there is always sapele for Bh... It is more direct, not so puorus and perfect for power blocks and contra smashes... And the look of sapele is just perfect
​​​​

 

[hipnotic]

This is a solid and relatively stiff 5 ply all wood blade. However, it is built mostly for spin rather than speed, due to the thick and soft outer plies.

Available FS.

- Ayous / Ayous / Ayous / Ayous / Ayous
- 96.6g
- 6.9mm
- 158x152mm
- ST (101x28.5x23mm)
- 1290Hz
- Balance: 3.0cm (Med)

 

[hipnotic]

A 5 ply all wood blade based on a Acoustic. The handle is just slightly flared, not wide, but thick and with a squarish profile so it feels chunky in the hand. Almost a mix between a ST and FL handle.

Available FS.

- Limba / Limba / Kiri / Limba / Limba
- 83.4g
- 5.9mm
- 157x150mm
- FL (100x25-24mm)
- 1270Hz
- 2.1cm (Very Low)

 

[hipnotic]

Outer fiber blades with Ayous cores aren't really that common on the market. Adding to that we have a mixture of straight and conical handle with a squarish profile and the "Dicon" slots. The forehand side has a rounded bevel that better fits the thumb, while the backhand side as a normal bevel that follows the index finger position.

Available FS.

- Limba / AxC / Ayous / Ayous / Ayous / AxC / Limba
- 88.5g
- 5.8mm
- 157x150mm
- ST/CON (102x28-30x22.5mm)
- 1400Hz
- Balance: 2.7cm (Low)

 

[yoyoman]

Sergio the last experimental blade I have bought of you is realy excelent light and fast + the two diffferent sides make it great.


: Limba / Larch / Balsa / Ayous / Cork / Anigre
Weight: 74.1g
Thickness: 8.2mm
Handle: ST (23.5 x 103 x 28.9)
Head size: 157x149mm

Balance: 3. Composition 3cm (Med)
Freq.: 1356Hz

 

[yoyoman]

Sergio the last experimental blade I have bought of you is realy excelent light and fast + the two diffferent sides make it great.


: Limba / Larch / Balsa / Ayous / Cork / Anigre
Weight: 74.1g
Thickness: 8.2mm
Handle: ST (23.5 x 103 x 28.9)
Head size: 157x149mm

Balance: 3. Composition 3cm (Med)
Freq.: 1356Hz

 

[hipnotic]

Sergio the last experimental blade I have bought of you is realy excelent light and fast + the two diffferent sides make it great.

That's great, I wasn't sure you were going to like it because it was designed for a different playstyle.

Sent from my MAR-LX1A using Tapatalk

 

[hipnotic]

Starting the year with something new: S-ALC. Compared to regular ALC, it has a different weave pattern, all the blue stuff is placed horizontally while all the carbon is placed vertically, which results in more stiffness but with more ball penetration. In terms of playing properties that translates into a longer and lower trajectory with a softer feel.

Available FS

- Limba / S-ALC / Ayous / Kiri / Ayous / S-ALC / Limba
- 88.1g
- 6.0mm
- 157x150mm
- FL (101x25-23mm)
- 1421Hz
- Balance: 2.1cm (Very Low)

 

[hipnotic]

Carbonado style composition with a Spruce outer ply.

Available FS.

- Spruce / TC160 / Ayous / Kiri / Ayous / TC160 / Spruce
- 87.7g
- 6.35mm
- 161x150mm
- CS (82x24.5x33mm)
- 1550Hz
- Balance: 4.1cm

 

[Zion]

This is such a gorgeous blade. Have u made one like tha acoustic with inner carbon also?


hipnotic;387406A 5 ply all wood blade based on a Acoustic. The handle is just slightly flared, not wide, but thick and with a squarish profile so it feels chunky in the hand. Almost a mix between a ST and FL handle.

Available FS.

- Limba / Limba / Kiri / Limba / Limba
- 83.4g
- 5.9mm
- 157x150mm
- FL (100x25-24mm)
- 1270Hz
- 2.1cm (Very Low)

This is such a gorgeous blade. Have u made one like tha acoustic with inner carbon also?

 

[hipnotic]

This is such a gorgeous blade. Have u made one like tha acoustic with inner carbon also?

Yes, I have made a few.

Sent from my MAR-LX1A using Tapatalk

 

[hipnotic]

This is a demanding blade. On soft impact it behaves like what you'd expect from a inner style composition, the feeling is soft and the blade is not very responsive. However, on hard impact the extra stiffness given by the S-AxC comes to life, and despite retaining a soft feeling, the responsiveness of the blade is highly increased, almost resembling an outer fiber blade. This type of behavior on a blade can be hard to control, but it can also be deadly in the right hands.

Available FS.

- Limba / Ayous / S-AxC / Ayous / S-AxC / Ayous / Limba
- 93.4g
- 5.85mm
- 157x150mm
- ST/CON (102x28-30x24mm)
- 1313Hz
- Balance: 3.2cm (Med)

 

[MarekD]

To hipnotic. Could you tell us what kinds of composite materials you currently use in your blades? And what effect do these materials have on the behavior of the blades?
Thank you for answer,

 

[latej]

To hipnotic. Could you tell us what kinds of composite materials you currently use in your blades? And what effect do these materials have on the behavior of the blades?
Thank you for answer,

Ahoj Marku, SDC has great web-site, I recommend you go over it.

 

[hipnotic]

Okoume is usually not considered an exotic wood, but this kind of flaming pattern is really hard to find. In terms of properties it's very similar to Limba. The blade has a soft feeling and tremendous feedback, a great weapon for controlled looping with medium / medium-soft rubbers. The handle is made with exotic woods: Zebrano, Wenge and Padauk.

Available FS.

- Okoume / Cypress / Kiri / Cypress / Okoume
- 85.3g
- 6.05mm
- 157x150mm
- STSQ (102x28.5x22.5mm)
- 1250Hz
- Balance: 2.4cm (Low)

 

[Metaxa]

Okoume is usually not considered an exotic wood, but this kind of flaming pattern is really hard to find. In terms of properties it's very similar to Limba. The blade has a soft feeling and tremendous feedback, a great weapon for controlled looping with medium / medium-soft rubbers. The handle is made with exotic woods: Zebrano, Wenge and Padauk.

Available FS.

- Okoume / Cypress / Kiri / Cypress / Okoume
- 85.3g
- 6.05mm
- 157x150mm
- STSQ (102x28.5x22.5mm)
- 1250Hz
- Balance: 2.4cm (Low)

Wow, beautiful one!


Verzonden vanaf mijn iPhone met Tapatalk

 

[Ergosquare]

Already sold?

This one is one of the best, if not the best design i've seen from you Sergio

 

[hipnotic]

Already sold?

This one is one of the best, if not the best design i've seen from you Sergio

Thanks!

Yes, this one is gone.

Sent from my MAR-LX1A using Tapatalk