This user has no status.
Another new blade, this time Kiri - mahogany - walnut with a beech handle. After a few goes I've finally managed to get a template of an anatomical handle that I'm happy with. This has been made with polyurethane glue rather than PVA. It's definitely harder and therefore the blade feels a little like a commercial one. I've also noticed that the sweet spot seems larger. It's 88g and 6.4mm thick so the weight isn't an issue. The only problem was I damaged the edge a little when oiling the blade!
Other than that I'm happy with this one.
View attachment 12747
Two new blades: Mahogany - ayous - balsa. 8.4mm - a 6mm balsa core. 74g. Oak and spruce handle
View attachment 12939View attachment 12940View attachment 12941
Maple - ayous - ayous. 5.4mm. 88g. Sapele, ash and beech handle.
View attachment 12942View attachment 12943
Are you sure that the second layer is ayous? Looks more like spruce to me.
OOO never get hands on brown ayous ... main is always "white" but yes exactly .... you can build what ewer you like to satisfies your needs .... i have 8 incarnations of my blade to achieve what i need ...but still i really like the feeling of the heavy blade 100 grams +- but want it into 85 grams blade ..... this is hard to accomplish .Yes, definitely ayous but it is horizontal rather than vertical. I managed to get hold of several sheets very cheaply but they are a strange size so I ended up using them horizontally. Not sure how it plays yet, but the walnut - mahogany - kiri blade in the previous page plays great and is now my main blade.It was made with PU glue which I find has a more solid feel than PVA which is a bit soft for me. The good thing about this hobby is that everything you do is personal, I make the handles I like, the wood I like, the speed I like etc. I made one with a birch outer which has great spin but the handle wasn't quite right so I'll make it again with a different handle.
OOO never get hands on brown ayous ... main is always "white" but yes exactly .... you can build what ewer you like to satisfies your needs .... i have 8 incarnations of my blade to achieve what i need ...but still i really like the feeling of the heavy blade 100 grams +- but want it into 85 grams blade ..... this is hard to accomplish .
After receiving positive feedback I've now started making blades for a few other people.
The first was for Aaron who is a professional table tennis coach based in the North West of England. As well as being a nice guy and top coach, he is really strong player. I asked to him to try a few of my blades so I could get some feedback and in the end I made this blade for him:
View attachment 13368
This is a Kiri - Mahogany - Walnut composition with ash, beech and walnut anatomic handle. I've asked him to leave a frank and honest review as I've had several questions relating to how they play.
Whilst working with Aaron on his blade I had a request from Wayne for another blade with the same composition. Wayne is another really nice guy who generates loads of spin and plays in the first division in one of our local leagues. He specifically asked to be able to feel the wood on the handle so I made it from one piece of oak - again it's anatomic. I've also asked Wayne if he would leave a review.
View attachment 13369
Since making these two I've had 3 more 'orders' for blades, two of which will be the same composition. The other is for defensive/all plus combination blade which I've not made before but I'm really excited about.
Have you made limba outer plies blade also.
[/QUOTE]Ginja Nigja (GN) recently came down to my club and brought a series of home made blades. All his blades were made with different types of wood and glues and all played different, with bigger and smaller sweet spots. The one thing that highly impressed me about all these bats were the feel on every shot, the finish and the balance. After trying out the various bats and reviewing them, (GN) made me a very nice 5 ply blade with a Kiri core, Mahogany middle and Walnut outer. I'm very pleased with this blade, it doesn't have much flex but it plays very well. The sweet spot is big due to the Walnut + Mahogany and it has fantastic control with the soft core. Looping away is easy near and mid range with good dwell. It has a slightly different playing angle that I am used to though. I need to open my bat up a few more degrees on both my BH and FH, but when made this adjustment is it very consistent. Thanks for the blade and you should give up your day job and make more blades.
When you can make cpen let me know. I am interestedVery kind thank you. I love my job so it will never be a profession but I do like making blades and it's great to see others enjoying playing with them.