SDC Handmade Blades

[SDC]

The SDC 115g Mandalorian so totally kicked azz today in NYC...

Sent from my SM-S908U using Tapatalk

Beware of using a Disney character's name in NYC, I've heard two lawyers will jump out of a trash bin and sue you 😃

 

[SDC]

Nothing too fancy, just a classic 5 ply looping blade with a Zebrano handle.

- Limba / Mahogany / Ayous / Mahogany / Limba
- 88.0g
- 5.5mm
- 157x150mm
- FL (101x25mm)
- 1141Hz
- 3.1cm (Med)

 

[SDC]

Custom order 5 ply blade. The handle design (not originally mine) is a nice way of achieving a lower weight distribution by having a heavier wood on the bottom.

- Koto / Spruce / Ayous / Spruce / Koto
- 85.6g
- 5.75mm
- 1335Hz
- Balance: 1.9cm (Very Low)

 

[Kolev]

Piece of art. Was it meant to be to be an OFF , or...

 

[SDC]

Piece of art. Was it meant to be to be an OFF , or...

We were aiming for a ALL+, linear and with a solid feeling, so I used a light core.

Sent from my MAR-LX1A using Tapatalk

 

[ricospin]

We were aiming for a ALL+, linear and with a solid feeling, so I used a light core.

Sent from my MAR-LX1A using Tapatalk

mr. Hipnotic,

have you ever made cpen blades?

curious about a possible lyj szlc clone, or something like a w968 clone.

 

[SDC]

mr. Hipnotic,

have you ever made cpen blades?

curious about a possible lyj szlc clone, or something like a w968 clone.

Yes I have.

 

[SDC]

Custom order asymmetric blade.

- Kumamoto Hinoki / Hinoki / ZLC / Balsa / A-C / Ayous / Limba
- 81.2g
- 5.95mm
- 1378Hz
- Balance: 1.6cm (Very Low)

 

[yoass]

A beauty. Why is it built that way?

 

[SDC]

A beauty. Why is it built that way?

Mostly because the owner wanted it this way, the composition and handle design originated from his concept. The goal was to have a not too fast combi blade meant for SP on the Fh, with a more direct trajectory, and a safer arc on the Bh.

 

[An0n]

A beauty. Why is it built that way?

In addition to Hipnotic's comment. It's basically a combination of 3 blades that suited me, Hinoki for the pips, inner carbon for the backhand and Balsa to add some bounce and reduce weight.

 

[SDC]

I haven't been posting a lot of penhold blades, that's my fault, I will try to do it more often. This one is a very light specimen, very stiff but relatively soft due to the AxC fiber. The low weight brings the speed down a bit, but it's still a very fast blade in the bottom of the OFF+ range.

Available FS.

- Kiso Hinoki / AxC / Kiri / AxC / Kiso Hinoki
- 74.6g
- 7.4mm
- 160x150mm
- CS (82x25x33mm)
- 1745Hz
- balance: 3.3cm

 

[SDC]

Custom order.

- Koto / ALC / Ayous / Kiri / Ayous / ALC / Koto
- 89.5g
- 5.75mm
- 1421Hz
- Balance: 2.5cm (Low)

 

[Zwill]

I haven't been posting a lot of penhold blades, that's my fault, I will try to do it more often. This one is a very light specimen, very stiff but relatively soft due to the AxC fiber. The low weight brings the speed down a bit, but it's still a very fast blade in the bottom of the OFF+ range.

Available FS.

- Kiso Hinoki / AxC / Kiri / AxC / Kiso Hinoki
- 74.6g
- 7.4mm
- 160x150mm
- CS (82x25x33mm)
- 1745Hz
- balance: 3.3cm

Wow, this is super light for this thickness and everything. Even with a balsa core this would be pretty light. It's basucally a penhold Schlager ALC super light edition.

 

[SDC]

Wow, this is super light for this thickness and everything. Even with a balsa core this would be pretty light. It's basucally a penhold Schlager ALC super light edition.

Something like that 😅

 

[UpSideDownCarl]

Hinoki/Balsa and ALC.....be afraid....be very afraid..... 😀

 

[SDC]

I have nightmares about it!

 

[Der_Echte]

Sergey Tsos Scoobie Doo is NOT afraid of SDC blades, he liked the original Spartan, then when he hit with the newer Mandalorian, he knew immediately it was a winner capable of touch and power play. I had to use a hydraulic press to get the Mandalorian outta hiz pawz.

 

[UpSideDownCarl]

Sergey Tsos Scoobie Doo is NOT afraid of SDC blades, he liked the original Spartan, then when he hit with the newer Mandalorian, he knew immediately it was a winner capable of touch and power play. I had to use a hydraulic press to get the Mandalorian outta hiz pawz.

Using them, no need to be afraid.....playing against....whole different story!

I would be entertained seeing High Toss B-stard looping with the Hinoki/ALC/Balsa rocketship....or is it BH Man....or......

 

[SDC]

You can just ask the owner of this one to have a go.

- Kumamoto Hinoki / TC160 / Balsa / TC160 / Kumamoto Hinoki
- 73g
- 8.3mm
- 1940Hz
- Balance: 1.5cm (Very Low)