This user has no status.
This user has no status.
🏆 Top 1% Commenter
Well-Known Member
Well-Known Member
So after a bit of back and forth with chat gpt, it concluded on this recipe for a booster.
What's your thoughts? I think it sounds promising.
---
DIY Long-Lasting Table Tennis Rubber Booster
Duration: approximately 4 to 6 months of boosted effect
Ingredients (for about 100 ml total booster):
70 ml light mineral oil (white cosmetic-grade oil or unscented baby oil)
25 grams cosmetic-grade paraffin wax (sold as candle wax or solid cosmetic wax)
5 ml lamp oil or turpentine (optional, for stronger and quicker penetration)
Tools required:
- Glass jar or heat-safe container
- Wooden stir stick or spoon
- Double boiler (or two pots, one inside the other with water)
- Measuring cup or kitchen scale
- Brush or sponge for application
- Rubber press (stack of books or clamp with foam)
Instructions:
1. Heat 70 ml of mineral oil gently in a double boiler — do not boil, just warm to about 50 to 60 degrees Celsius (120 to 140 degrees Fahrenheit).
2. In a separate container, melt 25 grams of paraffin wax using the same double boiler method until fully liquid and transparent.
3. Slowly pour the melted wax into the warm mineral oil while stirring continuously until fully mixed and uniform.
4. (Optional) Add 5 ml of lamp oil or turpentine and stir well to create a slightly thinner, more aggressive booster.
5. Let the mixture cool to room temperature.
6. Pour into a sealable glass or high-quality plastic container. Label and store in a cool, dry place.
Application steps:
1. Clean the sponge side of the rubber thoroughly.
2. Apply a thin, even layer of the booster to the sponge using a brush or clean sponge.
3. Let it absorb for 12 to 24 hours.
4. Apply a second thin layer if stronger dome or feel is desired.
5. Let the rubber dome and rest for 48 to 72 hours before gluing.
6. Glue using standard water-based or rubber cement glue. Press under books or clamp for at least 6 hours.
Maintenance and notes:
- The boost effect lasts around 4 to 6 months per application.
- Reapply when the sponge starts to feel dull or less springy.
- Store booster in an airtight jar — it will remain usable for months.
Safety reminders:
- Use in a well-ventilated area, especially if solvent is included.
- Keep away from flames, heat, and children.
- Do not use as a cosmetic or apply to skin.
What's your thoughts? I think it sounds promising.
---
DIY Long-Lasting Table Tennis Rubber Booster
Duration: approximately 4 to 6 months of boosted effect
Ingredients (for about 100 ml total booster):
70 ml light mineral oil (white cosmetic-grade oil or unscented baby oil)
25 grams cosmetic-grade paraffin wax (sold as candle wax or solid cosmetic wax)
5 ml lamp oil or turpentine (optional, for stronger and quicker penetration)
Tools required:
- Glass jar or heat-safe container
- Wooden stir stick or spoon
- Double boiler (or two pots, one inside the other with water)
- Measuring cup or kitchen scale
- Brush or sponge for application
- Rubber press (stack of books or clamp with foam)
Instructions:
1. Heat 70 ml of mineral oil gently in a double boiler — do not boil, just warm to about 50 to 60 degrees Celsius (120 to 140 degrees Fahrenheit).
2. In a separate container, melt 25 grams of paraffin wax using the same double boiler method until fully liquid and transparent.
3. Slowly pour the melted wax into the warm mineral oil while stirring continuously until fully mixed and uniform.
4. (Optional) Add 5 ml of lamp oil or turpentine and stir well to create a slightly thinner, more aggressive booster.
5. Let the mixture cool to room temperature.
6. Pour into a sealable glass or high-quality plastic container. Label and store in a cool, dry place.
Application steps:
1. Clean the sponge side of the rubber thoroughly.
2. Apply a thin, even layer of the booster to the sponge using a brush or clean sponge.
3. Let it absorb for 12 to 24 hours.
4. Apply a second thin layer if stronger dome or feel is desired.
5. Let the rubber dome and rest for 48 to 72 hours before gluing.
6. Glue using standard water-based or rubber cement glue. Press under books or clamp for at least 6 hours.
Maintenance and notes:
- The boost effect lasts around 4 to 6 months per application.
- Reapply when the sponge starts to feel dull or less springy.
- Store booster in an airtight jar — it will remain usable for months.
Safety reminders:
- Use in a well-ventilated area, especially if solvent is included.
- Keep away from flames, heat, and children.
- Do not use as a cosmetic or apply to skin.