Back to Forum
Page 22 of 38 FirstFirst ... 1218192021222324252632 ... LastLast
Results 421 to 440 of 746
  1. merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 62 416
    merlin el mago's Avatar
    merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 416 62
    #421
    Quote Originally Posted by hipnotic
    There is a lot of talk about hide glue and the great feeling it provides. I’m always skeptical of this kind of claims so I decided to test this myself by building two exact blades, with the only variable being the glue used. First I will give a brief description of these two glues:
    Hide Glue: This is an animal protein based glue, which is water soluble. Because of this it is vastly used in instrument building and repair. The ease of reversibility allows luthiers to perform repairs without damaging the instrument by simply injecting moisture into the joint. The glue doesn’t penetrate the wood, instead it forms a layer over the material and bonds to it. This glue is hard to work with because it has to be applied while still hot. Because of this it has a very short open time, and if the layers aren’t clamped within this time frame a poor bond can be formed.
    PU Glue: Polyurethane glue is a polymer based adhesive with great strength. It is waterproof once cured and it penetrates the pores of the wood forming a great bond. It is easier to work with because it has a relatively high open time.
    Building procedure:
    I decided to perform this test with a 5 ply composition similar to the perhaps most famous hide glue blade out there, the Nittaku Acoustic. But instead of using a Limba medial ply, I chose to use a harder but thinner Sycamore Maple layer. So, the composition is Limba / Sycamore / Kiri / Sycamore / Limba.
    All the plies were carefully selected so that the weight before the glue was applied was the same. The method for applying the glue was the same on both blades, a layer of glue on both sides to be glued, and the blades were clamped at the same time, using the same pressure. The weight difference after the plies were glued and the shape was 0.6g, with the PU blade being the heavier. It wasn’t possible to keep the handles with the same exact weight but the difference was very small. The final weight of the blades was 89.5g for both.

    Attachment 21967

    Attachment 21968
    Results:
    These were my findings after testing both blades. The first difference I noticed was on the pitch while bouncing a ball on the bare blades. The Hide glue blade possessed a lower pitch, which was corroborated by the measured peak frequency. The Hide glue blade measured 1205 Hz while the PU measured 1227 Hz, a small but noticeable difference. This immediately told me the PU blade would be a little harder and stiffer. These were also the impressions I got during play. The Hide glue blade provides a slightly softer feeling, while the PU feels just a little harder and faster.
    Conclusion:So, is there a difference? Short answer: Yes! But is one better than the other? Not necessarily…I have a preference for softer blades so in this case my vote goes for the Hide glue blade, but I’m sure that a lot of people would prefer the more solid and direct feeling of the PU blade. This decision is very subjective and would depend on the player. Keep in mind that these differences were very small, and in a blind test some might not even notice the difference. There is also the matter of the amount of glue used. With hide glue a layer on each side is needed to have a perfect bond, but with PU glue I normally just need one layer to have a strong bond. So in the case of this test I used more glue than needed, which exacerbated the feeling. In retrospect, I should’ve built a third blade using this method...
    Many thanks to share your opinions, really appreciated.

    The Following User Likes merlin el mago's Post:

    hipnotic


  2. Konrad Bak is offline
    says legendary EJ
     
    Elite TTD Member 219 1,029
    K
    Konrad Bak is offline
    says legendary EJ
     
    Elite TTD Member 1,029 219

    User Info Menu


    Oct 2016
    Poland
    1,029
    219
    1534
    Read 2 Reviews
    #422
    send me price calculation on priv

  3. hipnotic is offline
    This user has no status.
     
    Senior TTD Member 961 806
    hipnotic's Avatar
    hipnotic is offline
    This user has no status.
     
    Senior TTD Member 806 961

    User Info Menu


    Dec 2011
    Portugal
    806
    961
    2321
    Read 0 Reviews
    #423
    A little experiment I did using two bouncy woods, Hinoki and Fineline. Don't let the relatively low frequency fool you, this thing is soft but fast!

    Composition: Hinoki / Fineline / I-C / Ayous / I-C / Fineline / Hinoki
    Weight: 95.8g
    Thickness: ~6.0mm
    Freq.: 1290 Hz
    Balance: 2.9cm (Low)

    Name:  111_2.jpg
Views: 286
Size:  95.2 KB

    Name:  111_3.jpg
Views: 286
Size:  81.6 KB

    Name:  111_5.jpg
Views: 290
Size:  76.8 KB

    The Following 3 Users Like hipnotic's Post:

    Sedis, tt_kidz and 1 other

    www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades

  4. merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 62 416
    merlin el mago's Avatar
    merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 416 62
    #424
    Sergio send me a PM with quote with specs for limba-ayous-ayous (core)-ayous-hinoki. Thanks in advance.

  5. UpSideDownCarl is offline
    says I like to hit Heavy Topspin
     
    Super Moderator 15,810 14,226
    UpSideDownCarl's Avatar
    UpSideDownCarl is offline
    says I like to hit Heavy Topspin
     
    Super Moderator 14,226 15,810
    #425
    Quote Originally Posted by merlin el mago
    Sergio send me a PM with quote with specs for limba-ayous-ayous (core)-ayous-hinoki. Thanks in advance.
    What we think in our heads and the reality of things are not always the same.

    With a 6 ply blade, how do you expect to have a core that is not the 2 middle-most plies and only one of the two?

    would that mean that the 2 plies (Hinoki-Ayous would be the same thickness of the 3 plies on the far side of the core (Limba-Ayous-Ayous)? Because, if you had a core that was not in the CENTER, it would only be the core in your imagination but it would not actually function as a core.

    But maybe you have a plan. So, I am curious how a ply that is not in the center would be the center. Or, if that ply would actually be in the center.
    Setup 1: Blade by Nate: Vortex Spin Machine, FH Evolution MX-K, BH Evolution FX-P
    Setup 2: OSP Virtuoso Plus, FH Rasanter R 48, BH Rasanter R 48
    Spin is Everything

  6. merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 62 416
    merlin el mago's Avatar
    merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 416 62
    #426
    Sorry I'm asking a 5 ply all wood blade.

    Limba out
    Ayous medial
    Ayous core/center 3mm
    Ayous medial
    Hinoki out

    Now?

  7. merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 62 416
    merlin el mago's Avatar
    merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 416 62
    #427
    I want like a Stiga all round but in place two limba outer layers, one limba & one hinoki to attack better.

    The Following User Likes merlin el mago's Post:

    hipnotic

    Last edited by merlin el mago; 09-23-2020 at 03:41 PM.

  8. hipnotic is offline
    This user has no status.
     
    Senior TTD Member 961 806
    hipnotic's Avatar
    hipnotic is offline
    This user has no status.
     
    Senior TTD Member 806 961

    User Info Menu


    Dec 2011
    Portugal
    806
    961
    2321
    Read 0 Reviews
    #428
    Quote Originally Posted by merlin el mago
    Sergio send me a PM with quote with specs for limba-ayous-ayous (core)-ayous-hinoki. Thanks in advance.
    Done!
    www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades

  9. UpSideDownCarl is offline
    says I like to hit Heavy Topspin
     
    Super Moderator 15,810 14,226
    UpSideDownCarl's Avatar
    UpSideDownCarl is offline
    says I like to hit Heavy Topspin
     
    Super Moderator 14,226 15,810
    #429
    Quote Originally Posted by merlin el mago
    Sorry I'm asking a 5 ply all wood blade.

    Limba out
    Ayous medial
    Ayous core/center 3mm
    Ayous medial
    Hinoki out

    Now?
    Quote Originally Posted by merlin el mago
    I want like a Stiga all round but in place two limba outer layers, one limba & one hinoki to attack better.
    Okay. That construction would work. Which side do you think you will be able to attack better with? So, on the side with the Hinoki top ply you feel you will attack better? Have you used Hinoki before? I am just curious.

    The Following User Likes UpSideDownCarl's Post:

    BlueSkies

    Setup 1: Blade by Nate: Vortex Spin Machine, FH Evolution MX-K, BH Evolution FX-P
    Setup 2: OSP Virtuoso Plus, FH Rasanter R 48, BH Rasanter R 48
    Spin is Everything

  10. empa is offline
    This user has no status.
     
    This user has been banned. 0 10
    E
    empa is offline
    This user has no status.
     
    This user has been banned. 10 0

    User Info Menu


    Sep 2020
    Greece
    10
    0
    80
    Read 0 Reviews
    #430
    for sale ?

  11. CLV is offline
    This user has no status.
     
    TTD Member 10 60
    C
    CLV is offline
    This user has no status.
     
    TTD Member 60 10
    #431
    Ordered a blade from hipnotic and i'm very happy with it. Only did one practice so far, but it feels great. The finishing is super professional. He was very helpful during the choosing proces. Delivery was fast an professional. I would do it again in a heartbeat.

    The Following User Likes CLV's Post:

    bobpuls


  12. Ivek is offline
    This user has no status.
     
    TTD Member 39 53
    Ivek's Avatar
    Ivek is offline
    This user has no status.
     
    TTD Member 53 39
    #432
    Name:  126-1.jpg
Views: 220
Size:  96.1 KBName:  126-2.jpg
Views: 216
Size:  85.9 KBName:  126-5.jpg
Views: 213
Size:  80.6 KB

    Composition: Fineline / Sucupira / European Spruce / Kiri / Ayous
    Weight: 91.7g
    Thickness: ~6.2mm
    Freq.: ~1180 Hz
    Balance: 3.1cm (Medium)

    Hello, let me just say, this blade was made by Hipnotic and its not a sponsored review.
    Now lets get right into it. This blades finish and craftsmanship is of the highest level, the plies used are fineline(poor mans hinoki), sucupira, spruce, kiri, ayous. I wanted one defensive side and one offensive side and this combination gave me right what I wanted. The hard sucupira second ply is acting like some kind of "carbon" ply giving the forehand side speed.
    The handle was made a little thicker and wider at the end for added stability.

    I have been playing omega 7 china ying on forehand and TSP Spectol Red on softer backhand side.

    I would rate this blades speed at OFF- to OFF for forehand side and about ALL for backhand side. The throw angle is medium. Sucupira ply gives the blade speed even away from table and the fineline gives it a nice low to medium arc full of spin. The blade gives of a slight vibration for added control and feel.

    Blocking with this blade is nice. I had no problem blocking with short pips nor with the xiom rubber, just a little closed angle sufficed.

    Close to the table play was a little harder to adjust only because of the different natures of different sides but the felling was crisp and the ball only had a little stronger bounce on the backhand side.

    All in all, definitely a blade I'll be playing for a long time. Thank you Hipnotic for making this blade for me, really nice customer service. Absolutely recommend.

    The Following 4 Users Like Ivek's Post:

    bobpuls, Giangt and 2 others


  13. merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 62 416
    merlin el mago's Avatar
    merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 416 62
    #433
    Quote Originally Posted by hipnotic
    Done!
    Thanks Sergio, answered.
    Last edited by merlin el mago; 09-26-2020 at 07:06 PM.

  14. merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 62 416
    merlin el mago's Avatar
    merlin el mago is offline
    This user has no status.
     
    Advanced TTD Member 416 62
    #434
    Quote Originally Posted by UpSideDownCarl
    Okay. That construction would work. Which side do you think you will be able to attack better with? So, on the side with the Hinoki top ply you feel you will attack better? Have you used Hinoki before? I am just curious.
    Yes used before Hinoki.

  15. hipnotic is offline
    This user has no status.
     
    Senior TTD Member 961 806
    hipnotic's Avatar
    hipnotic is offline
    This user has no status.
     
    Senior TTD Member 806 961

    User Info Menu


    Dec 2011
    Portugal
    806
    961
    2321
    Read 0 Reviews
    #435
    A fine example of how a good balance can make a heavy blade feel lighter than what really is. Owner was very aware of the importance of a good balance so he intentionally asked for a heavy handle, despite the increase in the total weight. The result is a 100g plus blade that feels much lighter in the hand.

    Composition: Ovangkol / Ayous / ZLC / Ayous / ZLC / Ayous / Ovangkol
    Weight: 105.3g
    Thickness: ~5.75mm
    Freq.: 1360 Hz
    Balance: 2.2cm (very low)

    Name:  114_1.jpg
Views: 196
Size:  93.1 KB

    Name:  114_2.jpg
Views: 195
Size:  77.5 KB

    Name:  114_3.jpg
Views: 205
Size:  77.1 KB

    Name:  114_5.jpg
Views: 203
Size:  77.1 KB

    The Following 5 Users Like hipnotic's Post:

    bobpuls, Der_Echte and 3 others

    www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades

  16. Giangt is offline
    This user has no status.
     
    Super Moderator 1,545 1,812
    Giangt's Avatar
    Giangt is offline
    This user has no status.
     
    Super Moderator 1,812 1,545
    #436
    Quote Originally Posted by hipnotic
    A fine example of how a good balance can make a heavy blade feel lighter than what really is. Owner was very aware of the importance of a good balance so he intentionally asked for a heavy handle, despite the increase in the total weight. The result is a 100g plus blade that feels much lighter in the hand.

    Composition: Ovangkol / Ayous / ZLC / Ayous / ZLC / Ayous / Ovangkol
    Weight: 105.3g
    Thickness: ~5.75mm
    Freq.: 1360 Hz
    Balance: 2.2cm (very low)

    Name:  114_1.jpg
Views: 196
Size:  93.1 KB

    Name:  114_2.jpg
Views: 195
Size:  77.5 KB

    Name:  114_3.jpg
Views: 205
Size:  77.1 KB

    Name:  114_5.jpg
Views: 203
Size:  77.1 KB
    +100g!! watch out for D_E and the goon squad.

    The Following 2 Users Like Giangt's Post:

    hipnotic and UpSideDownCarl

    Spare setup: Blade: Custom DHS W968 93.5g, FH: Hurricane 3 National BS (Black), BH: Tenergy 64 (Red)

  17. Der_Echte is offline
    says Grand Consultant to the Office of the Goon Squad
     
    Master TTD Member 10,988 10,741
    Der_Echte's Avatar
    Der_Echte is offline
    says Grand Consultant to the Office of the Goon Squad
     
    Master TTD Member 10,741 10,988

    User Info Menu

    #437
    Quote Originally Posted by Giangt
    +100g!! watch out for D_E and the goon squad.
    ... in before CDC updates...

    The Following 3 Users Like Der_Echte's Post:

    Giangt, hipnotic and 1 other

    President, Korea Foreign Table Tennis Club. Hit us up on TTD or Facebook
    http://www.facebook.com/koreaforeignttc

    Janitor at NexyUSA TT Equipment Shop
    http://www.nexyusa.com

    View our Lame Nexy USA corporate FB page
    http://www.facebook.com/nexyusa

  18. hipnotic is offline
    This user has no status.
     
    Senior TTD Member 961 806
    hipnotic's Avatar
    hipnotic is offline
    This user has no status.
     
    Senior TTD Member 806 961

    User Info Menu


    Dec 2011
    Portugal
    806
    961
    2321
    Read 0 Reviews
    #438
    Combination blade for an attacking chopper. Probably the most difference between sides I could get on a blade with the BH side close to ALL- and OFF- for the FH side.

    Weight: 89.7g
    Thickness: 6.4mm
    Freq.: 1184/1140 Hz
    Balance: 2.6cm (very low)

    Name:  112_1.jpg
Views: 150
Size:  96.9 KB

    Name:  112_2.jpg
Views: 149
Size:  87.9 KB

    The Following 2 Users Like hipnotic's Post:

    bobpuls and Sedis

    www.sdcttblades.com / Insta: @sdc_tt_blades / Face: @SDCblades

  19. bobpuls is offline
    This user has no status.
     
    Elite TTD Member 874 1,338
    bobpuls's Avatar
    bobpuls is offline
    This user has no status.
     
    Elite TTD Member 1,338 874
    #439
    Nice looking handle.

  20. P1ngP0ng3r is offline
    says Over 30yr TT experience
     
    Advanced TTD Member 100 270
    P1ngP0ng3r's Avatar
    P1ngP0ng3r is offline
    says Over 30yr TT experience
     
    Advanced TTD Member 270 100

    User Info Menu

    #440
    Looks nice!
    What's the composition of the blade?

    The Following User Likes P1ngP0ng3r's Post:

    hipnotic


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Create a new Topic:
Title is required.