Back to Forum
Page 1 of 4 1234 LastLast
Results 1 to 20 of 134

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #1

    DHS Hurricane hardness

    Hi,

    I keep looking for about what is the difference between the hardness of DHS Hurricane [3 NEO or non NEO] rubbers, i know about thickness, but i don't know about hardness, is the higher number means it is harder? And if it is harder does it mean it is faster or less control or what exactly? And if higher hardness with thick sponge say 2.2, does it need boosting if used on fast blade as well?

  2. Kuba Hajto is offline
    says Equipment matters a lot to scrubs who can't make minor adjustments to their stroke.
     
    Master TTD Member 725 1,684
    Kuba Hajto's Avatar
    Kuba Hajto is offline
    says Equipment matters a lot to scrubs who can't make minor adjustments to their stroke.
     
    Master TTD Member 1,684 725
    #2
    Quote Originally Posted by TareqPhoto
    Hi,I keep looking for about what is the difference between the hardness of DHS Hurricane [3 NEO or non NEO] rubbers, i know about thickness, but i don't know about hardness, is the higher number means it is harder? And if it is harder does it mean it is faster or less control or what exactly? And if higher hardness with thick sponge say 2.2, does it need boosting if used on fast blade as well?
    • Higher number harder.
    • 39 DHS scale is about as hard MX-D.
    • The harder the rubber the harder it is to play that faster it POTENTIALLY can play. If you cannot compress it with your stroke, you will NOT get the benefits.
    • 37 should have similar combined hardness as your tenergy
    Last edited by Kuba Hajto; 06-22-2022 at 11:21 AM.
    /devnull

  3. Dominikk85 is offline
    This user has no status.
     
    Advanced TTD Member 169 438
    D
    Dominikk85 is offline
    This user has no status.
     
    Advanced TTD Member 438 169

    User Info Menu


    Jul 2017
    Germany
    438
    169
    232
    Read 0 Reviews
    #3
    I understood it that harder rubbers are faster if you can swing fast but actually slower if you can't swing fast and also hard rubbers can generate a lot of spin if you brush it very hard and precise but a softer rubber it is easier to generate spin if you can't swing very fast.

    Not sure if that is correct though.

  4. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #4
    Well, I really don't know about hardness of rubbers even if people put comparisons, for example i see Tibhar MX-P so harder than Tenergy 05, to my taste i hate MX-P very much, i like Tenergy 05 and 05FX, i also bought recently Nittaku Fastarc G-1 and it is fast because i use thinner sponge, but it is also less hardness than MX-P, and i was playing with Hurricane 3 not sure which version but it was stolen, then i bought another one with i think 39 hardness and 2.15 sponge thickness, it is slower than Fastarc G-1 but more control for me, also ordered a Provincial blue sponge rubber so i hope to receive it soon and i asked a coach to boost it for me once i get it to see.

    What i want to say is, i don't know what combination i should go when choosing hardness and thickness, for me it sounds i will only play with the hardest sheet if it is thinner rubber and vise versa maybe, and also someone told me that he used MX-P with thickest rubber [2.2] and he didn't like it, same with me, so he advised me to go a bit thinner like 1.9mm or 2.0mm at most, so i am not sure if thickness of sponge is the only factor here, and i never read about hardness with other rubbers but only DHS mainly and alike, so if i want to order another DHS Hurricane 3 rubber i don't know which version and hardness to get, i will go with less thickness like 2.1mm or 2.15mm maybe, i am not really good with 2.2mm, even with Tenergy 05 but it was amazing rubber top sheet that is why i could manage the thickness maybe.

  5. Kuba Hajto is offline
    says Equipment matters a lot to scrubs who can't make minor adjustments to their stroke.
     
    Master TTD Member 725 1,684
    Kuba Hajto's Avatar
    Kuba Hajto is offline
    says Equipment matters a lot to scrubs who can't make minor adjustments to their stroke.
     
    Master TTD Member 1,684 725
    #5
    Quote Originally Posted by TareqPhoto
    Well, I really don't know about hardness of rubbers even if people put comparisons, for example i see Tibhar MX-P so harder than Tenergy 05, to my taste i hate MX-P very much, i like Tenergy 05 and 05FX, i also bought recently Nittaku Fastarc G-1 and it is fast because i use thinner sponge, but it is also less hardness than MX-P, and i was playing with Hurricane 3 not sure which version but it was stolen, then i bought another one with i think 39 hardness and 2.15 sponge thickness, it is slower than Fastarc G-1 but more control for me, also ordered a Provincial blue sponge rubber so i hope to receive it soon and i asked a coach to boost it for me once i get it to see.

    What i want to say is, i don't know what combination i should go when choosing hardness and thickness, for me it sounds i will only play with the hardest sheet if it is thinner rubber and vise versa maybe, and also someone told me that he used MX-P with thickest rubber [2.2] and he didn't like it, same with me, so he advised me to go a bit thinner like 1.9mm or 2.0mm at most, so i am not sure if thickness of sponge is the only factor here, and i never read about hardness with other rubbers but only DHS mainly and alike, so if i want to order another DHS Hurricane 3 rubber i don't know which version and hardness to get, i will go with less thickness like 2.1mm or 2.15mm maybe, i am not really good with 2.2mm, even with Tenergy 05 but it was amazing rubber top sheet that is why i could manage the thickness maybe.

    The hardness refers to the sponge only. The rubber which the top sheet is made of also hast its own hardness. But it is rarely disclosed.

    /devnull

  6. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #6
    Quote Originally Posted by Kuba Hajto

    The hardness refers to the sponge only. The rubber which the top sheet is made of also hast its own hardness. But it is rarely disclosed.

    But when i want to choose DHS Hurricane rubber they right like H39/40/41 and thickness 2.1mm/2.15/2.2, so what is the difference between the two? And i can find the combination between two in two colors anyway, but because i only use it for FH which means only black color, so which one i should buy, 38H 2.15mm or 41H 2.1mm or 40H 2.15mm?


  7. Attitude is offline
    This user has no status.
     
    Advanced TTD Member 175 318
    Attitude's Avatar
    Attitude is offline
    This user has no status.
     
    Advanced TTD Member 318 175
    #7
    Quote Originally Posted by TareqPhoto
    Well, I really don't know about hardness of rubbers even if people put comparisons, for example i see Tibhar MX-P so harder than Tenergy 05, to my taste i hate MX-P very much, i like Tenergy 05 and 05FX, i also bought recently Nittaku Fastarc G-1 and it is fast because i use thinner sponge, but it is also less hardness than MX-P, and i was playing with Hurricane 3 not sure which version but it was stolen, then i bought another one with i think 39 hardness and 2.15 sponge thickness, it is slower than Fastarc G-1 but more control for me, also ordered a Provincial blue sponge rubber so i hope to receive it soon and i asked a coach to boost it for me once i get it to see.

    What i want to say is, i don't know what combination i should go when choosing hardness and thickness, for me it sounds i will only play with the hardest sheet if it is thinner rubber and vise versa maybe, and also someone told me that he used MX-P with thickest rubber [2.2] and he didn't like it, same with me, so he advised me to go a bit thinner like 1.9mm or 2.0mm at most, so i am not sure if thickness of sponge is the only factor here, and i never read about hardness with other rubbers but only DHS mainly and alike, so if i want to order another DHS Hurricane 3 rubber i don't know which version and hardness to get, i will go with less thickness like 2.1mm or 2.15mm maybe, i am not really good with 2.2mm, even with Tenergy 05 but it was amazing rubber top sheet that is why i could manage the thickness maybe.

    That depends on the parameters Kuba mentioned and how you play. Nobody can say for certain what would be the best hardness for you.
    38-39 is usually a really good starting point to get to know the rubber. If you can hit really hard and need a little bit more high end speed you take the harder versions 40-41. Though i actually rarely see people capable of hitting real hard and quality shots where they would benefit from even harder sponges...


  8. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #8
    Quote Originally Posted by Attitude

    That depends on the parameters Kuba mentioned and how you play. Nobody can say for certain what would be the best hardness for you.
    38-39 is usually a really good starting point to get to know the rubber. If you can hit really hard and need a little bit more high end speed you take the harder versions 40-41. Though i actually rarely see people capable of hitting real hard and quality shots where they would benefit from even harder sponges...

    The problem with me hitting harder is that i am not fit, i can hit hard for 3 hours not a big deal, but in all those 3 hours i might have like 40% successful hard hitting or 85% or 60%, depends on my mood and atmosphere, if it is hot and i slept enough and eat good food i can make it up to 75-90% success, i won't say 95-100%, but in hot weather or humidity like some places here and didn't sleep well, ok, i don't think i can do anything not just hitting hard.

    I don't know what is that Nittaku Fastarc G-1 top sheet hardness is, but i bought the medium thickness sponge i believe maybe 1.7mm or 1.9mm, and i can hear that BOOOM catapult sound with my bad cheap cheap blade, so maybe that top sheet of Fastarc G-1 is great for me, also before with my stolen DHS hurricane 3 rubber i had it was tacky as i play nicely from far and it gives me time to return and attack, wasn't fastest but not slow at all, and i remember someone just commented when i practice only FH with him about the rubber: "It is CATCHY", but the new second one wasn't as tacky or control, was a bit faster, it is 39H 2.15mm, and can't remember which rubber specs of that Provincial blue sponge i ordered, but it will be used with my fastest blade and maybe i will boost it, i bought second new DHS same as the new first one and i asked the coach to boost for me to see the difference between boosted and unboosted regardless different blades.

    So when DHS mention for example 40 hardness does it means the whole rubber and not just top sheet and not sponge? I ordered MX-P twice of same thickness 2.2mm and never mentioned about hardness, and both i hated, at least i prefer Rakza 9 i had more, to me i feel like that MX-P could be only big hype from people to have replacement of Tenergy, i tested a coach racket which he has Tibhar FX-P and that was even better than MX-P to me.


  9. DukeGaGa is online now
    This user has no status.
     
    Senior TTD Member 349 700
    DukeGaGa's Avatar
    DukeGaGa is online now
    This user has no status.
     
    Senior TTD Member 700 349
    #9
    Sponge acts more or less like a spring in this situation, meaning it stores energy, so the thicker it is the more energy it can store, so the top end speed will differ a bit. Thicker sponges are also heavier, which is another big reason to choose different thicknesses to achieve the weight you want on your paddle.

    As for the hardness, the numbers any manufacturer says on the packaging are the hardness of the sponge only, at least that is true for now. The combined hardness of top sheet and sponge, or the individual hardness of the top sheet are not disclosed by them, so you really can’t compare products between different companies using the numbers. Btw, they uses different hardness scales too, so you’ll have to convert them, but people can’t seem to agree on the conversion either. So like mentioned above, Hurricane 3 rubbers, just pick 39 degree as a start, most people find that to be the sweet spot.
    Last edited by DukeGaGa; 06-22-2022 at 02:15 PM.

  10. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #10
    Quote Originally Posted by DukeGaGa
    Sponge acts more or less like a spring in this situation, meaning it stores energy, so the thicker it is the more energy it can store, so the top end speed will differ a bit. Thicker sponges are also heavier, which is another big reason to choose different thicknesses to achieve the weight you want on your paddle.

    Ok, i should mention about weight, how i forgot about it, for me i like less weight rubbers, it makes my play style more effectiveness as i don't need lots of energy or hard time hitting all my power, so i feel like the racket in my hand is moving light speed which is what i need, more than slow but so strong heavy balls maybe, many people told me that i am better at faster moves and attacks than hitting harder all my hand energy swinging, that is why i felt with Fastarc that it is like a rocket because no much thickness for weight and then it won't absorb more energy.


  11. harty is offline
    This user has no status.
     
    Established TTD Member 51 172
    H
    harty is offline
    This user has no status.
     
    Established TTD Member 172 51
    #11
    Performance is directly proportional to the hardness of the sponge.
    The higher the game performance, the higher the hardness.
    The 2.1 mm sponge is optimal, it responds better to the booster.
    Hardnesses are 37, 38, 39, 40 and 41 °.

  12. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #12
    Quote Originally Posted by harty
    Performance is directly proportional to the hardness of the sponge.
    The higher the game performance, the higher the hardness.
    The 2.1 mm sponge is optimal, it responds better to the booster.
    Hardnesses are 37, 38, 39, 40 and 41 °.

    So those numbers are the hardness of the sponge not the top sheet or it is the whole rubber?

    So thickness and hardness both are related to the sponge then.


  13. DukeGaGa is online now
    This user has no status.
     
    Senior TTD Member 349 700
    DukeGaGa's Avatar
    DukeGaGa is online now
    This user has no status.
     
    Senior TTD Member 700 349
    #13
    Quote Originally Posted by TareqPhoto


    So thickness and hardness both are related to the sponge then.

    Yes they are


  14. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #14
    Quote Originally Posted by DukeGaGa

    Yes they are

    Ah ok, so this will make it easy for me to choose then, i won't go for hardest sponge, maybe 38 or 39 is good for me then.

    The Following User Likes TareqPhoto's Post:

    lodro


  15. latej is offline
    says Khabib: Let's talk now. (Best satisfaction in 3 years.)
     
    Senior TTD Member 348 607
    L
    latej is offline
    says Khabib: Let's talk now. (Best satisfaction in 3 years.)
     
    Senior TTD Member 607 348
    #15
    Quote Originally Posted by TareqPhoto
    Ah ok, so this will make it easy for me to choose then, i won't go for hardest sponge, maybe 38 or 39 is good for me then.
    Yes, that would be my guess too. Go for 38.

    Honestly when I read the thread I was a bit confused. You said you already tried H3, so you should know how that one rubber (with its one hardness) behaves. You also said you ordered H3 and it is on the way already - now trying to pick another one? And you said you like Rakza 9, very bouncy rubber. I'd say if you like R9, you won't like H3, and vice-versa. So I really honestly don't quite understand.

    About H3 - my opinion is that here in TTD somehow magically a bubble formed, of people who like H3, and that statistically this is a rarity. Around me noone plays with it, when they try my setup, they tend to be a bit surprised, call it "control setup" :-). In my cca 75 matches last season maybe 3 opponents used H3, but not more. So I personally enjoy this statistical bubble rarity here, like god-send fun area. At the same time I believe chance it good you won't enjoy the rubber.

  16. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #16
    To me, i hate to have hardest sponge, only i can choose hardest sponge if i go with thinner one, like from 1.5mm up to 2mm maximum, i don't have much success of love to hardest thickest rubbers anyway.

  17. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #17
    I asked because i don't know what hardness is of this rubber, i thought maybe it is the topsheet hardness, or maybe the sponge itself, and i wasn't sure if the number is opposite, as 38 is harder than 40 for example, but i stand corrected, and i ordered them before i ask for tests, the two cheap are just tests and not a big deal, now just i have to wait that Provincial with H40 to have a real test and impression, but i will have more blades, one is a Cybershape i got already, and i will buy another blade for defensive if this Cybershape didn't serve me well, so for both blades or just this Cybershape i am still not sure which H3 to buy as i bought previous one before i order the blade, and i want to stay away from Tenergy due to price and MX-P due to performance so H3 and Fastarc G-1 are my two choices for now, Fastarc G-1 has only one hardness version with different thickness only, while for H3 i have to choose both, thickness and hardness.

  18. Tony's Table Tennis is offline
    This user has no status.
     
    Master TTD Member 3,025 4,572
    T
    Tony's Table Tennis is offline
    This user has no status.
     
    Master TTD Member 4,572 3,025

    User Info Menu


    Sep 2013
    South Africa
    4,572
    3,025
    8938
    Read 3 Reviews
    #18
    Quote Originally Posted by TareqPhoto
    Fastarc G-1 has only one hardness version with different thickness only,

    Fastarc has 4 hardness versions: C-1 , G-1 , P-1 , and S-1

    TTT

  19. TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 132 1,159
    T
    TareqPhoto is offline
    This user has no status.
     
    Elite TTD Member 1,159 132
    #19
    Quote Originally Posted by Tony's Table Tennis

    Fastarc has 4 hardness versions: C-1 , G-1 , P-1 , and S-1

    Does G-1 has 4 hardness?

  20. Kuba Hajto is offline
    says Equipment matters a lot to scrubs who can't make minor adjustments to their stroke.
     
    Master TTD Member 725 1,684
    Kuba Hajto's Avatar
    Kuba Hajto is offline
    says Equipment matters a lot to scrubs who can't make minor adjustments to their stroke.
     
    Master TTD Member 1,684 725
    #20
    Quote Originally Posted by TareqPhoto
    Does G-1 has 4 hardness?

    47-48 ESN scale, roughly 37-38 chinese dhs scale.

    /devnull

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Create a new Topic:
Title is required.