My Personal Guide to Rubbers on Aliexpress

[yepyepcool]

If I were you, I would get a 5 ply wood blade (Yinhe Earth E3 for example or DHS W3010 if you like thin handles) without any carbon because it will only harm your technique instead of helping and I would buy two yinhe big dipper 38* (1st version) they are rather cheap, have amazing control, very small catapult and are very predictable, easy to play with rubbers. Or Yinhe Mercury, if you don't like catapult effect.

I tried yinhe pro 01 and I didn't like it as much as I thought I would.

Yes, last year I played with Stiga all round classic blade and xiom intro fh, xiom europe bh. I wanted to switch to carbon this year.I bought dhs b2x. Then i saw there is a discount on yinhe 01 pro for 24€ on aliexpress then i bought it.


Yes, as you said, I'm in the process of getting used to it, I haven't gotten used to it yet. I've been playing with dhs b2x for 1 month. Now, I'm going to try the yinhe pro 01 and then I'll decide. I don't think I'll go back to the wood blade again, but I'll see.if I can't get used to it, I can return.

What parts of yinhe pro 01 didn't you like?

Yinhe big dipper needs booster?

 

[h3llary]

Yes, last year I played with Stiga all round classic blade and xiom intro fh, xiom europe bh. I wanted to switch to carbon this year.I bought dhs b2x. Then i saw there is a discount on yinhe 01 pro for 24€ on aliexpress then i bought it.


Yes, as you said, I'm in the process of getting used to it, I haven't gotten used to it yet. I've been playing with dhs b2x for 1 month. Now, I'm going to try the yinhe pro 01 and then I'll decide. I don't think I'll go back to the wood blade again, but I'll see.if I can't get used to it, I can return.

What parts of yinhe pro 01 didn't you like?

Yinhe big dipper needs booster?

I went back to all wood, 5 ply, and immediately started to win players I would lose against. Simply because I'm able to land more shots on the table and direct them exactly where I want them to and people just don't expect the balls I'm able to send now. With pro 01 all of this would end up in the net or out of the table because the blade is too fast and has a lot of flex (At least mine did)

I didn't like pro 01 due to the fact that it's very flexy and has decent fast made it hard to block incoming topspins, unlike with V14 pro which is a tad faster and stiffer but has way better block and precision for me.

I ditched the idea of playing with fast carbon blade and now I just play with 5 ply wood and speed is more than enough, but the control is like 2 times better like I said. The rubbers are mx-p and t05fx.

Big dipper does not need any boosting, just make sure you order 38 degrees.

 

[Jslick89]

Whats a good store on aliexpress to get booster from?

 

[TensorBackhand]

Whats a good store on aliexpress to get booster from?

Playa, HWSport

 

[yepyepcool]

I glued my tenergy rubbers with yinhe pro 01 blade. I played for about 2 hours and I liked it very much. I was planning to glue the new rubbers (gtx and ak47 red) to dhs bo2x but I gave up after trying yinhe pro 01. Now I'm thinking of ordering a new blade outer carbon.Which You recommend the Chinese clone?

 

[hclnnkhg]

I glued my tenergy rubbers with yinhe pro 01 blade. I played for about 2 hours and I liked it very much. I was planning to glue the new rubbers (gtx and ak47 red) to dhs bo2x but I gave up after trying yinhe pro 01. Now I'm thinking of ordering a new blade outer carbon.Which You recommend the Chinese clone?

if you don't want another pro 01, the Sanwei 75 seems to be a popular choice in China around the same price range.

 

[TheProfessor]

Is there free shipping on aliexpress?

 

[yepyepcool]

if you don't want another pro 01, the Sanwei 75 seems to be a popular choice in China around the same price range.

What about lemuria and stuar blades?

 

[hclnnkhg]

What about lemuria and stuar blades?

They are rarely mentioned on Chinese forums, but I've seen positive reviews about them here. Personally I never tried lemuria or stuor blades so I can't comment much about them.

 

[TensorBackhand]

What about lemuria and stuar blades?

I have several Lemuria and Stuor blades, and honestly they are excellent.

My favorite is the Stuor Harimoto ZLC clone. Compared to famous blades like Butterfly Harimoto ALC, or Long 5, I don't feel it is inferior.

 

[yepyepcool]

I have several Lemuria and Stuor blades, and honestly they are excellent.

My favorite is the Stuor Harimoto ZLC clone. Compared to famous blades like Butterfly Harimoto ALC, or Long 5, I don't feel it is inferior.

I used dhs b2x and it did not suit me, so I am afraid to buy inner carbon in case I will experience the same feeling again.


What about lemuria Zjk super zlc , do you have any information about that?


What is the difference between zlc and
alc?

 

[TensorBackhand]

I used dhs b2x and it did not suit me, so I am afraid to buy inner carbon in case I will experience the same feeling again.


What about lemuria Zjk super zlc , do you have any information about that?


What is the difference between zlc and
alc?

Yes I used the Lemuria ZJK for a long time, before selling it recently. It's a very good outer carbon blade, fast, crisp and snappy, very responsive. It uses their version of "zlc".

I also had a Lemuria FZD Alc clone before, which uses a blue alc fibre.

I liked the ZJK better, I think it was faster.

 

[yepyepcool]

Yes I used the Lemuria ZJK for a long time, before selling it recently. It's a very good outer carbon blade, fast, crisp and snappy, very responsive. It uses their version of "zlc".

I also had a Lemuria FZD Alc clone before, which uses a blue alc fibre.

I liked the ZJK better, I think it was faster.

What about sanwei 75? , As far as I can see, you tested it too with gtx pro.which one should i choose? Zjk ,sanwei 75 or another?

Which blade are you using now?

Thanks for your advice.

 

[TensorBackhand]

What about sanwei 75? , As far as I can see, you tested it too with gtx pro.which one should i choose? Zjk ,sanwei 75 or another?

Which blade are you using now?

Thanks for your advice.

sanwei 75 is good too. Maybe 75 is more balanced between speed and control and feeling. I would choose 75 if i wanted a outer fibre.

Now im using Stuor Harimoto zlc clone with H3

 

[yepyepcool]

#TensorBackhand , #hclnnkhg
Thank you for advices,
I will probably buy Sanwei 75, but maybe I can also buy Stuor Harimoto ZLC. Thanks again.

 

[ttarc]

They are rarely mentioned on Chinese forums, but I've seen positive reviews about them here. Personally I never tried lemuria or stuor blades so I can't comment much about them.

Do you by chance know if DoubleFish Polestar J1 (Viscaria structure)/J2 (HL5 structure) or Sword Diamond Mountain (Viscaria structure) are worth a try?

Double Fish Pole Star DF-J1: Transparent And Crispy,yet Not Ordinary In Daily Life!

Double Fish Pole Star DF-J1: transparent and crispy,yet not ordinary in daily life!

www.doublefish.com

潮流-星钻·山-Diamond Mountain-世奥得乒乓世界

www.swordtt.com

 

[hclnnkhg]

Do you by chance know if DoubleFish Polestar J1 (Viscaria structure)/J2 (HL5 structure) or Sword Diamond Mountain (Viscaria structure) are worth a try?

Double Fish Pole Star DF-J1: Transparent And Crispy,yet Not Ordinary In Daily Life!

Double Fish Pole Star DF-J1: transparent and crispy,yet not ordinary in daily life!

www.doublefish.com

潮流-星钻·山-Diamond Mountain-世奥得乒乓世界

www.swordtt.com

Almost no one uses Double Fish blade so I don't know anything about them. For the Sword Diamond series, Fire and Wind have good reviews, I play with Forest and I like it, so I think the Mountain can be a good choice as well.

 

[_JOOLA_]

Almost no one uses Double Fish blade so I don't know anything about them. For the Sword Diamond series, Fire and Wind have good reviews, I play with Forest and I like it, so I think the Mountain can be a good choice as well.

I had experience using the Double Fish blade. It was a blade - QI (HB) Carbon.
The manufacturer wrote that this is Of++, in fact it is Of-. Very soft and light blade. And what looks and is written as carbon is actually not carbon at all, but In my opinion vulcanite, which does not provide the rigidity I require. In the end, I gave it to an amateur at work for symbolic money, who still plays it to this day

 

[ttarc]

Almost no one uses Double Fish blade so I don't know anything about them. For the Sword Diamond series, Fire and Wind have good reviews, I play with Forest and I like it, so I think the Mountain can be a good choice as well.

Thank you. The whole Diamond series from Sword looks interesting.
Diamond Mountain = Koto, ALC, Ayous, Kiri, Ayous, ALC, Koto, 6.0 mm
Diamond Forest = Koto, Ayous, ALC2V1, Kiri , ALC2V1, Ayous, Koto, 6.0 mm
Diamond Fire = Koto, Ayous. ALC6R, Ayous, ALC6R, Ayous, Koto, 5.8 mm
Diamond Wind = Koto, PLC-B, Ayous, Ayous, Ayous, PLC-B, Koto, 5.8 mm
Speed according to Sword: Wind > Fire > Forest > Mountain

 

[TensorBackhand]

Do you by chance know if DoubleFish Polestar J1 (Viscaria structure)/J2 (HL5 structure) or Sword Diamond Mountain (Viscaria structure) are worth a try?

Double Fish Pole Star DF-J1: Transparent And Crispy,yet Not Ordinary In Daily Life!

Double Fish Pole Star DF-J1: transparent and crispy,yet not ordinary in daily life!

www.doublefish.com

Thank you. The whole Diamond series from Sword looks interesting.
Diamond Mountain = Koto, ALC, Ayous, Kiri, Ayous, ALC, Koto, 6.0 mm
Diamond Forest = Koto, Ayous, ALC2V1, Kiri , ALC2V1, Ayous, Koto, 6.0 mm
Diamond Fire = Koto, Ayous. ALC6R, Ayous, ALC6R, Ayous, Koto, 5.8 mm
Diamond Wind = Koto, PLC-B, Ayous, Ayous, Ayous, PLC-B, Koto, 5.8 mm
Speed according to Sword: Wind > Fire > Forest > Mountain

Sword Diamond looks cool. But i have too many blades already...