SDC Handmade Blades

[SDC]

"Wow, that's a thick carbon layer!"

At first it looks like it, but it's just a black wooden layer. #885 is a relatively slow 7 ply blade, it has a thin transverse spruce core that gives some kick on harder strokes, and medium thick Spruce outer layers for that softness and spin ability. It has a mild springy feel and it should pair well with medium soft rubbers for a spin-control based game.

Available FS.

- Spruce / Ayous / Poplar / Spruce / Poplar / Ayous / Spruce
- 85.2g
- 6.2mm
- 158x152mm
- FL (102x25-23mm)
- 1120Hz
- Balance: 3.2cm (Med)

 

[SenseiJM]

I did, as well as some other merchandising too, but thank you for the idea. At the moment that plan is on the background, my priority is finishing my workshop and then I can focus on other projects.

I am waiting eagerly for this amazing day

 

[SDC]

For my 900th blade I just wanted to make something simple and classic looking. I had some Hinoki cores for a while, but never used them, so I decided to do it for this one. It's a stiff blade as the frequency reading suggests, but not that fast, although it has the characteristic springy nature of Hinoki.

Available FS.

- Hinoki / Glassfiber / Hinoki / Glassfiber / Hinoki
- 90.4g
- 6.75mm
- 155x148mm
- FLSQ (100x22.5mm)
- 1507Hz
- Balance: 3.7cm (High)

 

[SlowPower]

Nice looking blade!

And I have to say: very good photography too!

This might inspire me to take out my old and dusty sony A7R with the closeup lense.

 

[SDC]

Nice looking blade!

And I have to say: very good photography too!

This might inspire me to take out my old and dusty sony A7R with the closeup lense.

Thanks! I just rely on an old Nokia Lumia phone 😅

 

[SDC]

I've tried this HL5 style composition with almost every type of AC weave in my arsenal, AC-I was the only one left. Compared to regular AC-# it feels slightly stiffer, slightly softer, a little more Bh oriented.

Available FS.

- Limba / Ayous / AC-I / Ayous / AC-I / Ayous / Limba
- 88.8g
- 5.95mm
- 157x150mm
- FL (100x25-23mm)
- 1290Hz
- Balance: 3.2cm (Med)

 

[SDC]

A slow outer fiber blade, direct Koto feeling and tamed vibrations but on a lower speed class than usual.

Available FS.

- Koto / Innegra / Ayous / Kiri / Ayous / Innegra / Koto
- 87.4g
- 6.0mm
- 157x150mm
- AN (100x24.0mm)
- 1120Hz
- Balance: 2.8cm (Low)

 

[bobpuls]

A slow outer fiber blade, direct Koto feeling and tamed vibrations but on a lower speed class than usual.

Available FS.

- Koto / Innegra / Ayous / Kiri / Ayous / Innegra / Koto
- 87.4g
- 6.0mm
- 157x150mm
- AN (100x24.0mm)
- 1120Hz
- Balance: 2.8cm (Low)

Sorry but the handle is off.... This one looks like for giveaway 😁

 

[SDC]

Recently I got my hands on this beautiful "fish scale" Koto and this is the first time using it. This pattern happens when wood is cut at a certain angle and it exposes the medullary rays, which are perpendicular to the growth rigs. Not all wood species have them, and they can be hard to find even within the same species. In terms of performance it's exactly the same, so it's mostly a visual change. This particular Koto is slightly softer than the one I normally use, but that has to do mostly with the tree it was cut from, rather then the "fish scale". In terms of composition it's a relatively thin 7 ply, with progressively harder layer towards the core, so we have a Kiri core instead of the usual Ayous. This gives a crisper initial feel on low impact, but a bigger holding sensation on harder shots. A little steeper price than usual because this is going to be a unique piece (in terms of handle). I usually make this design with Padauk, it works well because the endgrain must be pointing up to achieve that particular look, and not all woods are appropriate for this. I decided to try Black Walnut for this one, and I regretted the decision almost immediately, it was a pain in the a** to get it right, so you won't be catching me doing it again 😅.

Available FS.

- Koto / Framiré / Ayous / Kiri / Ayous / Framiré / Koto
- 88.4g
- 6.35mm
- 157x150mm
- ST (100x27x23.5mm)
- 1205Hz
- Balance: 3.2cm (Med)

 

[SDC]

This was supposed to be a custom order, my dumb self still believes in the honesty of people, but sometimes it doesn't turn out that way. But no harm done, just used an handle design of my choice and here it is. Originally I was asked for a very soft feeling, so despite having ZLC on the Bh side and being a little more direct on that wing, it's still softer than usual. Speed-wise I would probably classify it in the bottom OFF range. The engraving on the Bh side might resemble something, I'm not sure what 😅.

Available FS.

- Koto / ALC / Ayous / Kiri / Ayous / ZLC / Koto
- 85.8g
- 5.9mm
- 157x150mm
- FL (100x25.0-22.5mm)
- 1380Hz
- Balance: 2.8cm (Low)

 

[Lazer]

This was supposed to be a custom order, my dumb self still believes in the honesty of people, but sometimes it doesn't turn out that way. But no harm done, just used an handle design of my choice and here it is. Originally I was asked for a very soft feeling, so despite having ZLC on the Bh side and being a little more direct on that wing, it's still softer than usual. Speed-wise I would probably classify it in the bottom OFF range. The engraving on the Bh side might resemble something, I'm not sure what 😅.

Available FS.

- Koto / ALC / Ayous / Kiri / Ayous / ZLC / Koto
- 85.8g
- 5.9mm
- 157x150mm
- FL (100x25.0-22.5mm)
- 1380Hz
- Balance: 2.8cm (Low)

To me it’s pretty obvious the engraving is a dragon…

Cheers
L-zr

 

[SDC]

To me it’s pretty obvious the engraving is a dragon…

Cheers
L-zr

Good, then you got it 😉. But it's not "a" dragon, it's "the" dragon.

 

[dingyibvs]

Good, then you got it 😉. But it's not "a" dragon, it's "the" dragon.

That's right, the dragon on HL5 blades!

 

[SDC]

I usually refrain from putting heavy blades for sale here, there is general limit and most people consider anything above 90g too heavy. Well, that's because they only look at the weight of the blade, and not that little last piece of information I give which is the balance. Most commercial blades nowadays use fineline for their handles, and this is a relatively light material, so it just doesn't have the mass to counter act the weight of the head, resulting in head heavy blades. Because this material is also consistent in weight, generally speaking a heavier blade will also be more head heavy, the weight difference is on the composition itself, and not the handle. This blade could easily have 85g if I used a much lighter handle material, but in this case I chose to use Pau Ferro, which literally translates to Iron Stick. It's a very heavy wood, but the feeling in the hand is nothing like holding a regular blade, it feels like you are holding an expensive piece of furniture. For the composition I'm using Burma Teak, which feels like an harder Limba, and in general the blade feels like a step up from a Primorac for example.

Available FS.

- B. Teak / B. Teak / WRC / B. Teak / B. teak
- 99.0g
- 5.75mm
- 158x152mm
- FL (100x25-23mm)
- 1248Hz
- Balance: 1.8cm (Very Low)

 

[damszelfly]

I usually refrain from putting heavy blades for sale here, there is general limit and most people consider anything above 90g too heavy. Well, that's because they only look at the weight of the blade, and not that little last piece of information I give which is the balance. Most commercial blades nowadays use fineline for their handles, and this is a relatively light material, so it just doesn't have the mass to counter act the weight of the head, resulting in head heavy blades. Because this material is also consistent in weight, generally speaking a heavier blade will also be more head heavy, the weight difference is on the composition itself, and not the handle. This blade could easily have 85g if I used a much lighter handle material, but in this case I chose to use Pau Ferro, which literally translates to Iron Stick. It's a very heavy wood, but the feeling in the hand is nothing like holding a regular blade, it feels like you are holding an expensive piece of furniture. For the composition I'm using Burma Teak, which feels like an harder Limba, and in general the blade feels like a step up from a Primorac for example.

Available FS.

I am still gathering different playing experiences with different materials to let the personalized concept of "the blade" (or a few more of them) grow in me, but I can say, that I won't be shy to use blades even in the weight range of 91-105g (even more, if it would be a defender blade).
I have been using a few blades with the mentioned fineline material handles, and they do not impress me, because I tend to use rather heavy rubbers for double inverted rubber play (lower balance then is definitely helpful to be less fatigued in the long run). When I get to the point where I can say in details, what I would like you to build, I will go for at least medium density wood in the handle.

That blade you just shared is marvelous.

 

[BaRanchik]

I usually refrain from putting heavy blades for sale here, there is general limit and most people consider anything above 90g too heavy. Well, that's because they only look at the weight of the blade, and not that little last piece of information I give which is the balance. Most commercial blades nowadays use fineline for their handles, and this is a relatively light material, so it just doesn't have the mass to counter act the weight of the head, resulting in head heavy blades. Because this material is also consistent in weight, generally speaking a heavier blade will also be more head heavy, the weight difference is on the composition itself, and not the handle. This blade could easily have 85g if I used a much lighter handle material, but in this case I chose to use Pau Ferro, which literally translates to Iron Stick. It's a very heavy wood, but the feeling in the hand is nothing like holding a regular blade, it feels like you are holding an expensive piece of furniture. For the composition I'm using Burma Teak, which feels like an harder Limba, and in general the blade feels like a step up from a Primorac for example.

Available FS.

- B. Teak / B. Teak / WRC / B. Teak / B. teak
- 99.0g
- 5.75mm
- 158x152mm
- FL (100x25-23mm)
- 1248Hz
- Balance: 1.8cm (Very Low)

This outer ply is absolutely beautiful! Kinda looks like your black limba blades, but more symmetrical.

 

[Dstea]

What is the difference between AxC and AyC? It looks like you just rotate it 90 degrees?

 

[SDC]

What is the difference between AxC and AyC? It looks like you just rotate it 90 degrees?

Precisely 😉

Fibers

Fibers

www.sdcttblades.com

 

[SDC]

I've been getting a few concerned messages. Sorry, it was not my intention to worry anyone.

2023 was a very complicated year for me, a lot of work, some personal issues and health problems, so I decided to step out of social media for a while, until things returned to a more stable pace.

I'm still building blades and accepting orders, but unfortunately I don't have as much time to communicate as before, so it takes me a while to respond to everyone. I'm mostly focusing on communicating with customers whose blades I'm building at the moment.

All of this commotion as also caused many delays regarding the timelines I initially gave to customers, my sincere apologies. After many months of delay some customers are no longer interested, which is perfectly understandable, but most of them still want to proceed which makes me truly happy, thank you for trusting my work.

Well, things are starting to stabilize a bit, I still don't have the same level of productivity regarding blades, but I'm slowly picking up the pace and, hopefully, good things will come soon 🙂.

 

[Khimmi]

I can only say that Sergio is a person with a big heart and a perfect professional. Like anyone, he can go through difficult times. I would like to add that he always thinks about us and our satisfaction. I don't mind paying him whatever money it takes because what you get from him is a unique blade that is also made with enthusiasm and love. A big hug to Sergio and the members of the forum.